• 한국산업보건학회지
• /
• 제18권1호
• /
• pp.1-10
• /
• 2008

In order to evaluate performance of anti-vibration gloves, it is necessary to measure the transmitted vibration to the hand and the applied forces at the same time while gripping the vibrating handle. In the study a system was developed to measure both the vibration and the forces. The system consists of a measurement handle with eight strain gauges and two accelerometers and a PC-based system with a software for signal processing, evaluation of the hand-transmitted vibration and for control of applied forces in the pre-determined range. The handle was installed on the vibration shaker which is strong enough so as not to be affected by dynamic coupling with the hand-arm. Whole procedure of ISO 10819:1996 to determine the vibration transmissibility of anti-vibration gloves was programmed into the system. As an example of the application, three subjects joined the test to get vibration transmissibilities of 9 anti-vibration gloves where each glove was tested twice a subject. Average and standard deviation of the corrected vibration transmissibility were also calculated. All tested gloves fulfilled criterion for M-spectrum($\overline{TR_M}$<1.0), but one glove fulfilled criterion for H-spectrum($\overline{TR_H}$<6.0),

• 비파괴검사학회지
• /
• 제31권6호
• /
• pp.601-608
• /
• 2011

This paper presents the damage assessment of a building structure by using a novel optical fiber accelerometer system. Especially, a sub-scaled building model is designed and manufactured to check up the feasibility of the optical fiber accelerometer for structural health monitoring. The novel accelerometer exploits the moir$\acute{e}$ fringe optical phenomenon and two pairs of optical fibers to measure the displacement with a high accuracy, and furthermore a pendulum to convert the displacement into acceleration. A prototype of optical fiber accelerometer system has been successfully developed that consists of a sensor head, a control unit and a signal processing unit. The building model is also designed as a 4-story building with a rectangular shape of $200{\times}300$ mm of edges. Each floor is connected to the next ones by 6 steel columns which are threaded rods. Basically, a random vibration test of the building model is done with a shaker and all of acceleration data is successfully measured at the assigned points by the optical fiber accelerometer. The experiments are repeated in the undamaged state and the damaged state. The comparison of dynamic parameters including the natural frequencies and the eigenvectors is successfully carried out. Finally, the optical fiber accelerometer is proven to be prospective to evaluate dynamic characteristics of a building structure for the damage assessment.

• 한국소음진동공학회논문집
• /
• 제16권6호
• /
• pp.602-608
• /
• 2006

In order to evaluate performance of anti-vibration gloves, it is necessary to measure the transmitted vibration to the hand and the applied forces at the same time while gripping the vibrating handle. In the study a system was developed to measure both the vibration and the forces. The system consists of a measurement handle with eight strain gauges and two accelerometers and a PC-based system with a software for signal processing and evaluation of the hand-transmitted vibration and for control of applied forces in the pre-determined range. The handle was installed on the vibration shaker which is strong enough so as not to be affected by dynamic coupling with the hand-arm system. Whole procedure of ISO 10819 to determine the vibration transmissibility of anti-vibration gloves was programmed into the system. As an example of the application, three subjects joined the test to get vibration transmissibilities of anti-vibration gloves where each glove was tested twice a subject. Average and standard deviation of vibration transmissibility were also calculated.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제10권S_2호
• /
• pp.79-88
• /
• 2001

Humic acids react with chlorine to produce Trihalomethanes(THMs), known as carcinogens, during disinfection, the last stage in water purification. Currently, the removal of organic humic acids is considered the best approach to solve the problem of THM formation. Accordingly, the current study examined the adsorption of organic compounds of humic acids onto an inorganic carrier prepared from oyster shell waste. The adsorbent used was activated oyster shell powder(HAP) and silver ion-exchanged oyster shell powder(HAP-Ag), with CaCO$_3$ as the control. The adsorbates were phthalic acid, chelidamic acid, catechol, dodecylpyridinium chloride(DP), and 2-ethyl phenol(2-EP). The adsorption experiments were carried out in a batch shaker at $25^{\circ}C$ for 15 hours. The equilibrium concentration of the adsorbate solution was analyzed using a UV spectrophotometer and the data fitted to the Langmuir isotherm model. Since the solution pH values were found to be greater than the pKa values of the organic compounds used as adsorbates, the compounds apparently existed in ionic form. The adsorptive affinities of the organic acid and phenolic compounds varied depending on the interaction of electrostatic forces, ion exchange, and chelation. More carboxylic acids and catechol, rather than DP and 2-EP, were adsorbed onto HAP and HAP-Ag. HAP and HAP-Ag exhibited a greater adsorptive affinity for the organic compounds than CaCO$_3$, used as the control.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권8호
• /
• pp.3285-3291
• /
• 2015

Background: Non-synonymous polymorphisms in XRCC1 hase been shown to reduce effectiveness of DNA repair and be associated with risk of certain cancers. In this study we aimed to clarify any association between XRCC1 Arg399Gln and colorectal cancer (CRC) risk by performing a meta-analysis of published case-control studies. Materials and Methods: PubMed and Google Scholar were searched to explore the association between XRCC1 and CRC. Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated to estimate the association strength. Publication bias was assessed by Egger's and Begg's tests. Results: Up to January 2015, 35 case control studies involving 9,114 CRC cases and 13,948 controls were included in the present meta-analysis. The results showed that the Arg399Gln polymorphism only under an allele genetic model was associated with CRC risk (A vs. G: OR 0.128, 95% CI 0.119-0.138, p<0.001). Also, this meta-analysis suggested that the XRCC1 Arg399Gln polymorphism might associated with susceptibility to CRC in Asians (A vs G: OR 0.124, 95% CI 0.112-0.138, p<0.001) and Caucasian (A vs G: OR 0.132, 95% CI 0.119-0.146, p<0.001) only under an allele genetic model. Conclusions: This meta-analysis confirms the association between XRCC1 Arg399Gln polymorphism and CRC risk and suggests that the heterogeneity is not strongly modified by ethnicity and deviation from the Hardy-Weinberg equilibrium.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1997년도 제9회 학술강연회논문집
• /
• pp.33-34
• /
• 1997

장비나 부품이 비행 또는 수송 등 실제상황에서 겪게되는 진동환경에 얼마만큼 견디는지 여부를 확인하고, 예상되는 동적 하중에 의한 성능저하나 오 동작이 일어나지 알는지 확인하기 위해 환경진동시험(environmental vibration test)이 수행된다. 이러한 환경진동시험의 경우에는 대형(대용량)의 진동시험기(shaker 또는 exciter)가 이용되며 진동시험기로부터 에너지를 시험물에 기계적으로 전달시켜줄 수 있는 진동 시험치구(이하, "치구(fixture)")가 필요하게 된다. 따라서 치구의 설계문제가 대두되며, 환경진동시험의 성공여부를 좌우하는데 대단히 중요한 역할을 하게 된다. 치구의 설계시 가장 중요한 점은 시험규격에 정해진 기준스펙트럼(specified reference spectrum)이 치구 위에 설치될 여러 시험물부착점들에 그대로 전달될 수 있는 강체치구(rigid fixture)를 설계하는 것이 가장 이상적이지만 치구의 공진 및 반공진 특성으로 인해 시험물부착점들 마다 스펙트럼이 달라지게 된다. 따라서 시험물은 과대시험(overtest) 또는/그리고 과소시험(undertest)를 겪게된다.최근의 진동시험제어 기법으로서는 다채널시스템을 이용한 여러 시험부착점들에서의 진동레벨의 평균을 제어하는 평균제어기법(average control technique)이 이용되므로서 시험주파수 범위에서 공진진동수(resonance frequency)들은 기준스펙트럼과 동일하게 제어가 가능하나 반공진 진동수(antiresonance frequency)들에서는 반공진 진동수들이 갖는 물리적 특성으로 인해 기준스펙트럼과 동일하게 제어가 이루어지지 않으므로시험규격에 정해진 정확한 진동시험이 수행되지 못하게된다.본 연구에서는 치구의 설계단계에서 치구 위의 여러 시험물 부착점들- 평균제어점(average control points)- 에서의 반공진 진동수들을 고려하여 그 감도를 게산하고, 치구의 구조변경을 수행하여 시험물 부착점들에서의 반공진 진동수를 일치시키므로서 종래의 진동시험제어시 나타나는 반공진진동수에서의 문제점을 제거할 수 있고, 그 결과 시험물 부착점들에서의 스펙트럼이 시험규격에 정해진 스펙트럼대로 진동시험이 수행될 수 있게 하는데 있다.

• The Plant Pathology Journal
• /
• 제20권4호
• /
• pp.240-243
• /
• 2004

White rot on Allium crops recently had a high incidence with incrensed cultivating areas of tropical garlic types in Korea. Two types of Sclerotium have known as causal agents that produce different size and shapes of sclerotia in infested fields. Therefore, we developed a new method for isolation of sclerotia from infested field soils that can be used for ecological study of Sclerotium spp. and establishment of control strategy. Soil samples collected from heavily infested fields were evenly mixed and placed on a automatic sieve shaker connected with tap water, After 10 min of shaking, residues on 0.5 mm and 0.25 mm sieves were separately collected and suspended with 70% sugar solution, which method floats sclerotia in aqueous layer, Then, floated fraction was carefully separated and mixed with a same volume of 1% sodium hypochlorite solution to differentiate with organic materials. This method provides a direct count of sclerotia under a dissecting microscopy.

• Journal of Microbiology and Biotechnology
• /
• 제23권6호
• /
• pp.864-871
• /
• 2013

The recombinant strain P. pastoris GS115-lccC was used to produce laccase with high activity. Factors influencing laccase expression, such as pH, methanol concentration, copper concentration, peptone concentration, shaker rotate speed, and medium volume were investigated. Under the optimal conditions, laccase activity reached 12,344 U/L on day 15. The recombinant enzyme was purified by precipitating and dialyzing to electrophoretic homogeneity, and was estimated to have a molecular mass of about 58 kDa. When guaiacol was the substrate, the laccase showed the highest activity at pH 5.0 and was stable when the pH was 4.5~6.0. The optimal temperature for the laccase to oxidize guaiacol was $60^{\circ}C$, but it was not stable at high temperature. The enzyme could remain stable at $30^{\circ}C$ for 5 days. The recombinant laccase was used to degrade chlorpyrifos in several laccase/mediator systems. Among three synthetic mediators (ABTS, HBT, VA) and three natural mediators (vanillin, 2,6-DMP, and guaiacol), vanillin showed the most enhancement on degradation of chlorpyrifos. Both laccase and vanillin were responsible for the degradation of chlorpyrifos. A higher dosage of vanillin may promote a higher level of degradation of chlorpyrifos, and the 2-step addition of vanillin led to 98% chlorpyrifos degradation. The degradation of chlorpyrifos was faster in the L/V system ($k_{obs}$ = 0.151) than that in the buffer solution ($k_{obs}$ = 0.028).

• The Plant Pathology Journal
• /
• 제19권2호
• /
• pp.92-96
• /
• 2003

The study was conducted to determine the cultural conditions and the effect of inert fillers for melanization and sporulation abilities of sodium alginate pellets, and the weeding efficacy of the formula in the field. Melanin production of E. nematosporus was affected by striking frequency. Percentage of melanized beads was increased to 80.6% at higher rpm up to 180. The melanized pellets produced more conidia with abundant mucilage than unmelanized pellets. Shaker culture of Epicoccosorus nematosporus with sodium alginate yielded a total of 55 mg per 100 pellets. Percentage of melanized pellets was highest with 81.0% and 83.3% of melanization, when wheat bran and rice polish were amended and produced the conidia with 65.4 and 68.4 mg per 100 pellets, respectively. When 1 L of conidial suspension of 6.0$\times$$10^5$ conidia per ml was applied on 30-day-old plants in a plot, 74.5% of the plants were killed within 20 days, whereas, its melanized sodium alginate pellets killed 57.8% of the plants in the same period. The number of tuber formation of Eleocharis kuroguwai in the untreated control plots was 128.5 per plot, but those of the plots treated with conidial suspension and melanized pellets were 22.1 and 39.7, respectively, at the end of the season. Results of this study showed that melanization of mycelia-mixed sodium alginate are an important sporulation factor in E. namatosporus as a mycoherbicide.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권2호
• /
• pp.134-144
• /
• 2007

본 연구에서는 구조물의 모니터링 시스템을 위하여 최근에 급속하게 발전하는 스마트 센서 기술을 이용하여 스마트 센서 장치를 개발하였고 다양한 실험을 통하여 개발한 스마트 센서의 기본적 성능 평가와 모형 구조물을 이용한 손상 검출 실험을 실시하였다. 본 논문은 Part 1로써 스마트 센서의 개발과 성능 평가에 관한 것이고 Part 2에서는 스마트 센서를 이용한 손상 검출 결과를 유선 계측 시스템을 이용한 실험결과와 비교하였다. 스마트 센서는 고 출력의 무선 모뎀과 고 성능 MEMS 센서, AVR 마이크로컨트롤러를 이용하여 개발하였으며 센서의 제어와 운영을 위한 임베디드 프로그램을 개발하였다. 스마트 센서의 성능을 검증하기 위하여 민감도와 분해능 분석 실험과 캔틸레버 보와 가진기를 이용한 데이터 획득 실험, 실 구조물을 이용한 현장 적용 실험을 실시하였다. 실험 결과, 개발한 스마트 센서의 성능에 대한 만족스런 결과를 얻었다.