Structural Health Monitoring System Employing Smart Sensor Technology Part 1: Development and Performance Test of Smart Sensor

스마트 센서 기술을 이용한 구조물 건전도 모니터링 시스템 Part I : 스마트 센서의 개발과 성능평가

  • 허광희 (건양대학교 토목공학과) ;
  • 이우상 (한국건설기술연구원 구조연구부) ;
  • 김만구 (충남대학교 토목공학과)
  • Received : 2006.11.13
  • Published : 2007.03.30

Abstract

In this study, a smart sensor unit is developed by using the smart sensor technology that is being rapidly developed in recent years for structural health monitoring system, and its performance is evaluated through various experiments, and also, damage detection experiment is performed on a model structure. This paper as the first half of this study contains the development and performance evaluation of the smart sensor. In the latter half of this study, structure damage detection experiment is performed for the application of verified smart sensor unit into structural health monitoring, and it is compared with a wire measurement system. The smart sensor is developed by using high-power wireless modem, MEMS Sensor and AVR microcontroller, and an embedded program is also developed for the control and operation of the sensor unit. To verify the performance of the smart sensor, many experiments are performed for sensitivity and resolution analysis tests, data acquisition by using cantilever beam and shaker, and on-site application using actual bridge. As a result, the smart sensor proves to be satisfactory in its performance.

본 연구에서는 구조물의 모니터링 시스템을 위하여 최근에 급속하게 발전하는 스마트 센서 기술을 이용하여 스마트 센서 장치를 개발하였고 다양한 실험을 통하여 개발한 스마트 센서의 기본적 성능 평가와 모형 구조물을 이용한 손상 검출 실험을 실시하였다. 본 논문은 Part 1로써 스마트 센서의 개발과 성능 평가에 관한 것이고 Part 2에서는 스마트 센서를 이용한 손상 검출 결과를 유선 계측 시스템을 이용한 실험결과와 비교하였다. 스마트 센서는 고 출력의 무선 모뎀과 고 성능 MEMS 센서, AVR 마이크로컨트롤러를 이용하여 개발하였으며 센서의 제어와 운영을 위한 임베디드 프로그램을 개발하였다. 스마트 센서의 성능을 검증하기 위하여 민감도와 분해능 분석 실험과 캔틸레버 보와 가진기를 이용한 데이터 획득 실험, 실 구조물을 이용한 현장 적용 실험을 실시하였다. 실험 결과, 개발한 스마트 센서의 성능에 대한 만족스런 결과를 얻었다.

Keywords

References

  1. Spencer, B.F., "Opportunities and Challenges for smart sensing Technology". First International Conference on structural Health Monitoring and Intelligent Infrastructure, Tokyo, Japan, 2003.
  2. Straser, E.G. and Kiremidjian A.S., "A modular visual approach to damage monitoring for civil structures." Proceedings of SPIE, Smart Structures and Materials, 2719, 1996, pp. 112-122.
  3. Agre, J.R., Clare, L.P., Pottie, G.J. and Romanov, N.P. "Development platform for self-organizing wireless sensor networks". Proceedings of SPIE- The International Society for Optical Engineering. Vol. 3713, Apr. 8 -Apr. 9 1999. Orlando, FL, USA, 1999, pp. 257-267.
  4. Jerome P. Lynch, Kincho H. Law, Erik G. Straser, Anne S. Kiremidjian, and Tom W. Kenny, "The Development of a Wireless Modular Health Monitoring System for Civil Structures", Proceedings of the MCEER Mitigation of Earthquake Disaster by Advanced Technologies (MEDAT-2) Workshop, Las Vegas, NV, USA, November, 2000, pp. 30-31.
  5. Kurata, N., Spencer Jr., B.F., Ruiz-Sandoval, M., Miyamoto, Y., and Sako, Y. "A study on building risk monitoring using wireless sensor network MICA-Mote". First International Conference on Structural Healh Monitoring and Intelligent Infrastructure, Tokyo, Japan, 2003, November pp. 13-15.
  6. Jerome P. Lynch, Arvind Sundarajan, Kincho H. Law, Anne S. Kiremidjian, Ed Carryer, Hoon sohn, Charles R. Farrar., "Field validation of a wireless structural monitoring system on the Alamosa Canyon Bridge", SPIE 10th, San Diego, CA, USA, March, 2003.
  7. Masanobu Sinozuka, Maria Q.Feng, Pai Chou, Yangbo Chen, chulsung Park,. "MEMS-Based Wireless Real-Time Health Monitoring of Bridge", The 3rd International conference on Earthquake Engineering Najing, China, 8, 2004.
  8. Hewlett Packard, "The Fundamentals of Signal Analysis", Application Note 243.
  9. ATMEL Inc., "Atmega128 data sheet." www. atmel.com, 2004.
  10. Caicedo J. M., Dyke S. J., "Phase II SHM Benchmark Studies: Application of the NExT and ERA for Damage Detection", Proceedings of the IMAC XXI Conference, Orlando, Florida, February 3-6, 2003.
  11. Caicedo, J. M., Dyke, S. J., Johnson, E. A., "NExT and ERA for Phase I of the IASCASCE Benchmark Problem: Simulated Data", Journal of Engineering Mechanics, ASCE, submitted, 2002.
  12. Giraldo D., Caicedo J. M. and Dyke S. J., "Experimental Phase of the SHM Benchmark Studies. Damage Detection Using NExT and ERA", Proceedings of the 16th ASCE Engineering Mechanics Conference, Seattle, Washington, July, 2003, pp. 16-18.