• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.25-31
• /
• 2011

Recently NMEA 2000 protocol is familiarized as a standard real time instrument network of SOLAS ship. This paper is studied to develop NMEA 2000 based two-dimensional ultrasonic anemometer which is core device for navigation as a sensor of wind speed and direction using ultrasonic including temperature and barometer. Developed system is connected to NMEA 2000 network which is composed of various kinds of merchandised NMEA 2000 device such as depth gauge, speed gauge, GPS device etc. to test connectivity with other NMEA 2000 device and functional test are carried out as weather station in comparison with other merchandised weather station which are developed advanced foreign company to ascertain usability as a weather station on board.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1052-1057
• /
• 2004

Bluetooth technology is essentially a method for wireless connectivity of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments, The bluetooth system both point-to point connection and point-to multipoint connection. In point-to multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The bluetooth standard ha s been suggested that bluetooth equipments can be used in the short-range, maximum 100 meters. It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.664-674
• /
• 1996

In high speed multi-wavelength networks, retransmission overhead due to desination conflict or control packet collision is one factor of performance degration because signal prpagation delay is much larger than the transmission time of data packet. In this paper, an efficient WDMA protocol with a collision avoidance mechanism is proposed for high speed WDM single-hop network with a passive star topology. In proposed protocol, each node has cource queues and routing table to store souting informatio. This architecture makes is possible to avoid any kind of collision when a node reserves the channel to transmit a data packet. High system thoughput and channel utilization can be achieved by proposed protocol since there are no discarded packets caused by any collision at transmission time. The performance of proposed protocol is evaluated in term of throughput and delay with variations in offered load. Simulation results show that the proposed protocol has superior performance to convertional protocols under nonuniform traffic as well as uniform traffic.

• Journal of KIISE:Information Networking
• /
• v.29 no.2
• /
• pp.141-155
• /
• 2002

A medium access control protocol is proposed for integrated voice and data services in the packet CDMA network with a small coverage. Uplink channels are composed of time slots and multiple spreading codes for each slot. This protocol gives higher access priority to the delay-sensitive voice traffic than to the data traffic. During a talkspurt, voice terminals reserve a spreading code to transmit multiple voice packets. On the other hand, whenever generating a data packet, data terminals transmit a packet based on the status information of spreading codes in the current slot, which is received from base station. In this protocol, voice packet does not come into collision with data packet. Therefore, this protocol can increase the maximum number of voice terminals.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.281-284
• /
• 2004

This paper presents the design and implementation of a QoS based enhanced collaboration system in MDO. This is an efficient distributed communication tool between designers. It supports text communication, audio/video communication, file transfer and XML data sending/receiving. Specially, this system supports a dynamic QoS self-adaptation by using the improved direct adjustment algorithm (DAA+). The original direct adjustment algorithm adjusts the transmission rate according to the congestion level of the network, based on the end to end real time transport protocol (RTP), and controls the transmission rate by using the information of loss ratio in real time transport control protocol (RTCP). But the direct adjustment algorithm does not consider when the RTCP packets are lost. We suggest an improved direct adjustment algorithm to solve this problem. We apply our improved direct adjustment algorithm to our of QoS (Quality of Service) [1] based collaboration system and show the improved performance of transmission rate and loss ratio.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.179-182
• /
• 2005

The Home Phoneline Networking Alliance (HomePNA) 2.0 technology can establish a home network using existing in-home phone lines, which provides a channel rate of 4 - 32 Mbps. HomePNA 2.0 Medium Access Control (MAC) protocol adopts an IEEE 802.3 Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method, a Quality of Service (QoS) algorithm, and a Distributed Fair Priority Queuing (DFPQ) collision resolution algorithm. In this paper, we analyze the HomePNA 2.0 MAC protocol and propose the architecture of HomePNA 2.0 MAC controller circuit. Then, we present the simulation result of each block included in the HomePNA 2.0 MAC controller.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.310-312
• /
• 2003

망 운용에 있어서 망 관리 시스템은 다양한 네트워크 장비의 증가로 인하여 점점 더 중요한 위치를 차지하고 있다. 과거 망을 구성하는 요소는 네트워크 장비로 국한되었지만 현재는 서비스를 지원하는 데몬(Daemon) 등 장비 외적인 요소까지 속하게 되어 더욱 복잡해 지고 있다. 기존의 망 관리 시스템은 SNMP(Simple Network Management Protocol)나ICMP(Internet Control Message Protocol) 프로토콜을 사용하였으나 이 기술만으로는 데몬과 같은 장비 외적인 요소들까지 제어, 관리하지 못했다. 반면. TELNET등과 같은 기능을 추가적으로 이용할 수 있다면. 보다 쉽게 망 정보를 얻을 수 있는 장점이 있어 기존의 망 관리 시스템에서 지원하지 못했던 기능의 한계점을 극복할 수 있다. 이에 본 논문은 객체지향기술(OOT : Object­Oriented Technology)을 도입하였다. 클래스(Class)는 고유한 특성을 가지는 관리 대상 종류를 선언한 것이고. 관리 대상은 네트워크 장비 뿐만 아니라 데몬이나 지역, 부서등과 같은 추상적인 대상이 포함되며 이는 객체(Object)를 의미한다. 또한. 상속(Inheritance) 개념을 도입하여 중복요소를 없앴으며, 클래스의 메소드(Method)에 관리 대상을 처리할 수 있는 기능을 정의하였다. 기능 정의에는 SNMP와 TELNET. ICMP등을 내부적으로 이용하여 구현된 스크립트(Script)를 이용하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.67-69
• /
• 2003

현재 인터넷은 음성을 포함한 실시간 정보의 제공을 기반으로 정보에 대한 욕구를 충족시키고 있으며, 이러한 인터넷의 실시간을 바탕으로 사용자는 새로운 서비스에 대한 요구를 창출하게 되었고, 저렴한 인터넷을 이용하여 Public Switched Telephone Network(PSTN)과 같은 기존 통신망을 대체하는 연구가 활발히 이루어지고 있다. VoIP(Voice over Internet Protocol)는 이러한 요구에 부흥하는 인터넷의 대표적인 서비스로 등장하고 있으며, MGCP, SIP 그리고 H.323 같은 프로토콜을 기반으로 VoIP 서비스를 위한 다각적인 접근과 연구가 진행 중이다. 본 연구는 VoIP 서비스를 위한 여러 프로토콜 중 IETF가 주관하고 있는 MGCP(Media Gateway Control Protocol) 스팩에 따라 MGCP를 구현하였으며, 댁내 서비스를 위한 인터넷에서의 VoIP 신뢰성을 보장하는 방안으로 기존 PSTN망을 백업형태로 지원하는 방안을 연구하여 특정 번호는 Call Agent(CA)와 MGCP 프로토콜로 통신하지 않고 임의 변경 없이 자동으로 기존 망으로의 발신이 가능한 시스템을 설계하고 구현하였다.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.171-175
• /
• 1997

We have developed a remote diagnosis system using the LAN and MODEM which enables a routine check for a patient remotely. We used $LabVIEW^{TM}$ as the programing development tool and DAQ (Data Aquisition) board from National Instrument for data aquisition. The LAN card and MODEM are used for the transmission of patient's data. A patient data are aquired by DAQ board and signal processing is done by $LabVIEW^{TM}$, which is a graphical prgamming language. Two methods for the data of transmission. One is the Client-Server model using TCP/IP (Transmission Control Protocol / Internet Address) in the LAN (Local Area Network) Another is using MODEM to transmit the measured data from a patient. In this case, the data transmission is accomplished by the FTP (File Transfer Protocol).

• ETRI Journal
• /
• v.19 no.1
• /
• pp.13-25
• /
• 1997

In this paper, we propose a new queuing model, MMDP/MMDP/1/K, for an asynchronous transfer mode(ATM) multiplexer with multiple quality of service(QoS) variable bit rate (VBR) traffic in broadband-integrated services digital network (B-ISDN). We use the Markov Modulated Deterministic Process(MMDP) to approximate the actual arrival process and another MMDP for service process Using queuing analysis, we derive a formula for the cell loss probability of the ATM multiplexer in terms of the limiting probabilities of a Markov chain. The cell loss probability can be used for connection admission control in ATM multiplexer and the calculation of equivalent bandwidth for arrival traffic, The major advantages of this approach are simplicity in analysis, accuracy of analysis by comparison of simulation, and numerical stability.