• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.101-111
• /
• 2011

A new MAC protocol, MT-MAC(Multi-Tier Medium Access Control) by name, is proposed for dense sensor networks. Depending on the density of nodes in a virtual cluster, the cluster header performs the splitting to several tiers in nodes of virtual cluster. MT-MAC split the tiers to use modfied-SYNC message after receiving the beacon message from the cluster header. Because only the sensor nodes in the same tier communicate each other, less power is consumed and longer network life time is guaranteed. By a simulation method with NS-2, we evaluated our protocol. In dense nodes environments, MT-MAC protocol shows better results than S-MAC in terms of packet delivery rates throughput and energy consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1200-1206
• /
• 2009

In this paper, we propose an energy-efficient MAC(Medium Access Control) protocol for processing context information in ubiquitous sensor network environments. CASMAC(Context Aware Sensor MAC) use context information for energy-efficient operation and its operation principle is as follows. First, we make scenarios with possible prediction for CASMAC. And then we save setted context information in server. When event occur at specific sensor node, and then it send three times sample data to server. According to context information, server process sample data. If server process sample data with event, it receive continuous data from event occur node by a transmission request signal. And then server send data transmission stop signal to event occur node when it do not need to data. If server process sample data with no event, it have not reply. Through we make energy consumption tables and an energy consumption model, we simulate analysis of CASMAC performance. In a result, we gains about 5.7 percents energy reduction compared to SMAC.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.385-390
• /
• 2015

Quay cranes are considered core equipment for container terminal operation. However, unmanned operation systems have not as yet been announced due to the technological difficulties of implementation. In this paper, we developed a wireless controller to control a quay crane simulator remotely and conducted its performance test, a first step toward unmanned operation of quay cranes. The communication delay of a developed wireless controller was about 9.4ms on average while that of existing wired controllers was about 5.6ms. The same functions were implemented and tested on a smart phone where the average communication delay was 7.3ms. In addition, to apply the developed system into a real environment, we proposed a network architecture based on IEEE 802.11ac and carried out its performance evaluation. When the distance between two nodes was 50m apart, the throughputs of the TCP (Transmission Control Protocol) and UDP (User Datagram Protocol) were 57Mbps and 189Mbps, respectively. The communication delay of the control data was 9.1ms through the TCP channel. These results reveal the proper working of remote quay crane operation if we adopt the IEEE 802.11ac network.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2140-2142
• /
• 2003

Recently, TCP/IP on Ethernet protocol is in use environment of LAN have developed a single chip by hardware. Therefore, the study about the single chip applies to the system control application like information electronic appliances, manufacturing automation machine has been made progress. This paper is the development of experimental Client node and Serve node that can transfer input-output data needed on Network Control System Client node is a sensor part of control system, that is, an analog signal is applicable to output data convert AD through LAN. Server node data sended in client convert DA, and then it is applicable to driver of Control System, so it achieves its part. In this study, is prove that using TCP/IP construct Network Control System.

• Journal of Communications and Networks
• /
• v.14 no.3
• /
• pp.319-335
• /
• 2012

In this study, we design an applicable model enabling internet protocol television (IPTV) service providers to use a virtual network (VN) for IPTV service delivery. The model addresses the guaranteed service delivery, cost effectiveness, flexible control, and scalable network infrastructure limitations of backbone or IP overlay-based content networks. There are two major challenges involved in this research: i) The design of an efficient, cost effective, and reliable virtual network topology (VNT) for IPTV service delivery and the handling of a VN allocation failure by infrastructure providers (InPs) and ii) the proper approach to reduce the cost of VNT recontruction and reallocation caused by VNT allocation failure. Therefore, in this study, we design a more reliable virtual network topology for solving a single virtual node, virtual link, or video server failure. We develop a novel optimization objective and an efficient VN construction algorithm for building the proposed topology. In addition, we address the VN allocation failure problem by proposing VNT decomposition and reconstruction algorithms. Various simulations are conducted to verify the effectiveness of the proposed VNT, as well as that of the associated construction, decomposition, and reconstruction algorithms in terms of reliability and efficiency. The simulation results are compared with the findings of existing works, and an improvement in performance is observed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.307-312
• /
• 2020

This paper proposed intelligent motor control system that replaced smart motor devices, such as motor protection relays, smart circuit breakers and variable speed drives, with one integrated module to perform efficient motor control at industrial sites. The proposed intelligent motor control system provides easy monitoring of critical data for each motor or load connected to an intelligent motor control system over a CIP(Common Industrial Protocol)-based network, which enables accurate process control at all times, real-time access to fault information and records to simplify diagnosis and minimize equipment downtime.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.39-44
• /
• 2002

In this paper, in order to improve the performance of TCP short traffic application services in wireless Internet environments, the Split-ACKs (SPACK) scheme is proposed. In wireless networks, unlike wired networks, packet losses will occur more often due to high bit error rates. Therefore, each packet loss over wireless lints results in congestion control procedure of TCP being invoked at the source. This causes severe end-to-end Performance degradation of TCP. In this paper, to alleviate the TCP Performance, the SPACK method, split acknowledgement Packets in the base station, is proposed. Using computer simulation, the performance of TCP using SPACK is analysed and shows better performance than traditional TCP Protocol.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.79-88
• /
• 2007

Demand for the technology for access to device control network in industry and for access to building automation system via internet is on the increase. In such technology integration of a device control network with a data network such as internet and organizing wide-ranging DCS(distributed control system) is needed, and it can be realized in the framework of VDN(virtual device network)[1,2]. Specifications for device control network and data network are quite different because of the differences in application. So a router that translates the communication protocol between device control network and data network and efficiently transmits information to destination is needed for implementation of the VDN, This paper proposes the concept of NCS(networked control system) based on VDN(virtual device network) and suggests the routing algorithm that uses embedded system.[3]

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2948-2957
• /
• 2000

A broadband access network in B- ISDN subscriber network, plays a role of concentration or multiplexing of various subscribers into a service node. To establish an end-to-end ATM connection, interworking functions between \'B5.2 interface's connection protocol and the signalling protocol, are perfonned at the service node. A sequential interworking model and a parallel interworking model were proposed for these interworking functions. The sequential interworking model proceeds the signalling protocol of network node after the response of VB5.2 interface protocol. On the other hand, the parallel interworking model proceeds the signalling protocol and the VB5.2 interface protocol simultaneously. In this paper, we analyze and simulate above two interworking models in tenns of a connection setup delay and completion ratio, when call requests with eBR and VBR transfer capability arrive at the service node. We observed that the completion ratios of the two interworking models are quite closed. However the connection setup delay of parallel interworking model is improved by about 33% compared with that of the sequential interworking model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.925-933
• /
• 2003

Network is expected to be developed into optical Internet network collected IP layer and optical layer, but GMPLS is risen at the transitional evolution stage because of the present technology level. GMPLS that MPLS is extended and generalized is able to support not only the packet switching device but also the devices which perform switching in time, wavelength, and space domain. To implement the common control plane to these various switching types, GMPLS extends the existing MPLS signaling and routing protocol. In this paper, we describe the overview of GMPLS technology, and then we will refer to the OSPF(Open Shortest Path First), which was used to exchange the status information of link, as the plan of routing extension to exchange the information of various link type, bandwidth, link protection type etc. And also, we describe the definition of new protocol, so called, LMP that is a signaling protocol for solving complex problem which manages hundreds and thousands of links between two nodes. And we will examine and analyze the plan of signaling protocol extension to apply signaling protocol RSVP-TE(Resource Reservation Protocol) for traffic engineering in MPLS to network, and the message objects and formats associated with modified RSVP.