• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1B
• /
• pp.11-17
• /
• 2003

In this paper, we presented the dynamic random access channel allocation method under the priority based scheduling policy in order to improve the system performance of HIPERLAN/2 standardized by ETSI According to the scheduling policy, AP scheduler primarily allocates the resource to the collision MT This scheduling policy bring about decreasing the transmission delay of collision MT Dynamic RCH(random access channel) allocation method decreases the collision probability by increasing the number of RCH slots in case of low traffic. While it increases the maximum throughput by increasing the number of the data transmission slots in case of high traffic Therefore dynamic allocation method of RCH slots decreases the scheduling delay and increases the throughput When we evaluate the performance of presented method based on standards, we saw that the presented method improve the performance of the MAC protocol in terms of throughput and transmission delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.296-304
• /
• 2010

MoIP is technology to transmit a variety of multimedia over IP, but compared to traditional voice services require greater bandwidth and radio resources in a wireless environment has already reached the limits. Therefore, as a way to resolve this issue for header compression is a lot of research. SCTP protocol header compression using ROHC-SCTP has been research, ROHC-SCTP packet structure of the ROHC algorithm with different types and, SCTP header compression to apply the characteristics of the poor performance of many of these have drawbacks. Therefore, in this paper to solve these problems better header compression algorithm was designed. In this paper, the proposed algorithm to evaluate the NS-2 simulation environment was modeled on the header compression operation. Evaluation results, the algorithm designed in this paper compared to ROHC-SCTP algorithms determine the overhead rate was low, the data types vary a lot better when the total header size was small.

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.458-467
• /
• 2001

Optimistic Two-Phase Locking(O2PL) performs as well as or better than the other approaches because it exploits client caching well and also has relatively lower network bandwidth requirements. However, O2PL leads to unnecessary waits, because, it can not be commit a transaction until the transaction obtains all requested locks. In addition, Optimistic Concurrency Control(OCC) tends to make needless aborts. This paper suggests an efficient optimistic cache consistency protocol that overcomes such shortcomings. Our scheme decides whether to commit or abort a transaction without wait and it adopts transaction re-ordering in order to minimize the abort rate. Our scheme needs only one version for each data item in spite of the re-ordering mechanism used. Finally, this paper presents a simulation-based analysis that shows superiority in performance of out scheme to O2PL and OCC.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.296-311
• /
• 2007

Mobile multi-robot teams are useful in many critical applications such as search and rescue. Explicit communication among robots in such mobile multi-robot teams is useful for the coordination of such teams as well as exchanging data. Since many applications for mobile robots involve scenarios in which communication infrastructure may be damaged or unavailable, mobile robot teams frequently need to communicate with each other via ad hoc networking. In such scenarios, low-overhead and energy-efficient routing protocols for delivering messages among robots are a key requirement. Two important primitives for communication are essential for enabling a wide variety of mobile robot applications. First, unicast communication (between two robots) needs to be provided to enable coordination and data exchange. Second, in many applications, group communication is required for flexible control, organization, and management of the mobile robots. Multicast provides a bandwidth-efficient communication method between a source and a group of robots. In this paper, we first propose and evaluate two unicast routing protocols tailored for use in ad hoc networks formed by mobile multi-robot teams: Mobile robot distance vector (MRDV) and mobile robot source routing (MRSR). Both protocols exploit the unique mobility characteristics of mobile robot networks to perform efficient routing. Our simulation study show that both MRDV and MRSR incur lower overhead while operating in mobile robot networks when compared to traditional mobile ad hoc network routing protocols such as DSR and AODV. We then propose and evaluate an efficient multicast protocol mobile robot mesh multicast (MRMM) for deployment in mobile robot networks. MRMM exploits the fact that mobile robots know what velocity they are instructed to move at and for what distance in building a long lifetime sparse mesh for group communication that is more efficient. Our results show that MRMM provides an efficient group communication mechanism that can potentially be used in many mobile robot application scenarios.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.405-411
• /
• 2002

Open interfaces in the optica] Internet have been progressed by OIF's ISI, ITU-T ASTN's CCI and IETF's GSMP extensions with optical switching. These open interfaces enable the separation between the control plane and the optical transport plane. This separation allows flexibility in the network, but it suffers more setup delay than the traditional switch-by-switch connection setup. We propose the parallel interworking model, which will reduce the connection setup delay in the open interface of optical Internet. Based on the switch controller's caching capability about networks states, the parallel interworking procedures between signaling protocol and GSMP protocol are performed in the switch controller. We simulated and evaluated our proposed parallel interworking model and the existing sequential interworking model in terms of a connection setup delay and a completion ratio. We observed that the completion ratios of the two interworking models were quite close. However the connection setup delay of parallel interworking model is improved by about 30% compared with that of the sequential interworking model.

• Journal of KIISE:Information Networking
• /
• v.29 no.2
• /
• pp.197-203
• /
• 2002

This paper proposes a new agent based mechanism called a Multicast Handoff Agent (MHA) to reduce handoff latency for IP multicast. The MHA acts as a proxy for an Internet Group Management Protocol (IGMP) of Mobile Nodes (MNs) at each Base Station (BS) and keeps information for members of multicast groups in a cell. When an MN moves to a next cell, the MHA immediately sends unsolicited reports without waiting for the IGMP query. The mechanism was evaluated through simulation and analysis and compared with the IGMPv2 for micro-mobility and the IGMP traffic. Simulation results show that handoff latency for micro-mobility can be largely reduced and the IGMP control traffic on the wireless links during the duration of membership can be eliminated. Thus, this mechanism is superior to the existing mechanism in both micro-mobility and battery duration, as the need not to reply to a query conserves battery power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.889-896
• /
• 2007

Advances in wireless networking, micro-fabrication and integration, and embedded microprocessors have enabled a new generation of massive-scale sensor networks. Because each sensor node is limited in size and capacity, it is very important to design a new simple and energy efficient protocol. Among conventional sensor networks' routing protocols, the directed diffusion scheme is widely blown because of its simplicity. This scheme, however, has a defect in that sending interest and exploratory data messages while setting connection paths consumes much energy because of its flooding scheme. Therefore, this paper proposes a new sensor network routing protocol, called sequenced directed diffusion with a threshold control, which compromises the conventional directed diffusion scheme's defect and offers an energy efficient routing idea. With a computer simulation, its performance is evaluated and compared to the conventional directed diffusion scheme. Numerical results show that the proposed scheme offers energy efficiency while routing packets, and resolves ill-balanced energy consumption among sensor nodes.

• Convergence Security Journal
• /
• v.24 no.1
• /
• pp.11-20
• /
• 2024

Recently, smart buildings that can efficiently manage energy using ICT technology and operate and control through the building automation system by collecting data from a large number of IoT sensors in real time are attracting attention. However, as data management is carried out through an open environment, the safety of smart buildings is threatened by the security vulnerability of the existing building automation protocol. Therefore, in this paper, we analyze the major data link technology of BACnet, which is used universally, and propose OWE-based efficient BACnet/SC that can ensure the reliability of data in a wireless environment. The proposed protocol enables safe communication even in an open network by applying OWE and provides the same level of security as BACnet/SC in a TLS environment. As a result, it reduces the connection process twice and reduces the average time required by 40%, enabling more efficient communication than before.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.281-284
• /
• 2005

Kerberos is system that offer authorization in internet and authentication service. Can speak that put each server between client and user in distributed environment and is security system of symmetry height encryption base that offer authentication base mutually. Kerberos authentication is based entirely on the knowledge of passwords that are stored on the Kerberos Server. A user proves her identity to the Kerberos Server by demonstrating Knowledge of the key. The fact that the Kerberos Server has access to the user's decrypted password is a rwsult of the fact that Kerberos does not use public key cryptogrphy. It is a serious disadvantage of the Kerbercs System. The Server must be physically secure to prevent an attacker from stealing the Kerberos Server and learning all of the user passwords. Kerberos was designend so that the server can be stateless. The Kerberos Server simply answers requests from users and issues tickets. This study focused on designing a SIP procy for interworking with AAA server with respect to user authentication and Kerberos System. Kerberos is security system of encryption base that offer certification function mutually between client application element and server application element in distributed network environment. Kerberos provides service necessary to control whether is going to approve also so that certain client may access to certain server. This paper does Credit-Control Server's function in AAA system of Diameter base so that can include Accounting information that is connected to Rating inside certification information message in Rating process with Kerberos system.

• Journal of KIISE:Information Networking
• /
• v.31 no.1
• /
• pp.91-100
• /
• 2004

This paper presents a receiver-driven TCP flow control mechanism, which is adaptive to the wireless condition, for memory constrained mobile receiver. A receiver-driven TCP flow control is, in general, achieved by adjusting the size of advertised window at the receiver. The proposed method constantly measures at the receiver both the available wireless bandwidth and the packet round-trip time. Depending on the measured values, the receiver adjusts appropriately the size of advertised window. Constrained by the adjusted window which reflects the current state of the wireless network, the sender achieves an improved TCP throughput as well as the reduced round-trip packet delay. Its implementation only affects the protocol stack at the receiver and hence neither the sender nor the router are required to be modified. The mechanism has been implemented in real environments. The experimental results show that in CDMA2000 1x networks the TCP throughput of the proposed method has improved about 5 times over the conventional method when the receiver's buffer size is limited to 2896 bytes. Also, with 64Kbytes of buffer site, the packet round-trip time of the proposed method has been reduced in half, compared the case with the conventional method.