• Analytical Science and Technology
• /
• v.15 no.5
• /
• pp.399-409
• /
• 2002

A system software on-line spectral analysis of atomic emission spectrometer. The system program consisted of a control part for the optical instruments and the spectrum analysis part the artificial intelligence method to reduce nonlinear error of the wavelengths. McPHERSON 207 Monochromator controlled GPIB communication protocol, and the detector signal was measured from PMT by using A/D Amplifier that was made by Photon_Tek. co.. HNN(Hybrid Neural Network) of artificial intelligence technique was applied to the qualitative analysis of P, Cu, Fe, Cr, and that was accurately applied to the quantitative analysis of Cd with 10 ppb level better than the conventional methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.5
• /
• pp.1303-1315
• /
• 2012

In the draft of the IEEE 802.11s standard, a tree topology is established by the proactive tree-building mode of the Hybrid Wireless Mesh Protocol (HWMP). It is used for cases in which the root station (e.g., gateway) is an end point of the majority of the data connections. In the tree topology, the root or central stations (e.g., parent stations) are connected to the other stations (e.g., leaves) that are one level lower than the central station. Such mesh stations are likely to suffer heavily from contention in bottleneck links when the network has a high traffic load. Moreover, the dependence of the network on such stations is a point of vulnerability. A failure of the central station (e.g., a crash or simply going into sleep mode to save energy) can cripple the whole network in the tree topology. This causes performance degradation for end-to-end transmissions. In a connected mesh topology where the stations having two or more radio links between them are connected in such a way that if a failure subsists in any of the links, the other link could provide the redundancy to the network. We propose a scheme to utilize this characteristic by organizing the network into concentric tiers around the root mesh station. The tier structure facilitates path recovery and congestion control. The resulting mode is referred to as Tier-based Proactive Path Selection Mode (TPPSM). The performance of TPPSM is compared with the proactive tree mode of HWMP. Simulation results show that TPPSM has better performance.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.95-103
• /
• 2002

We know that the all of warfare system has been becoming complex and variety in warfield thru the Gulf-War. The all of warfare electronic systems is designed to inter-operate by networks in recently. Especially Warfare Equipment systems of Men-of-War(War ship) as like KDX(Korea Destroyer, Experimental), FF(Frigate), PCC(Costal Patrol Craft), Submarine are connected by Combat System Databus to the Command system(C2 System), so C2 system can control all of equipments in ship. In this view, the status of network(Combat System Databus) is very critical parameter in war field. So In this paper, we propose the method of Network Management System construction for War ship, and especially propose the architectural design of network management system for DX(Destroyer, Experimental) equipments using SNMP(Simple Network Management Protocol). And Link Utilization is monitored by simulation. 

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.517-520
• /
• 2009

Healthcare application system has been actively researched to apply WSN technology to healthcare area with a mobile sensor node of low cost, low power, and small size. Sensor node has the problem for transmission range of RF power and time delay of the wireless routing connectivity between sensor nodes. In this paper, we proposes a new method utilizing mobile sensor nodes with relay sensor nodes for quick network routing changing using query technique in healthcare system. A query processor to control and manage the routing changing of sensor nodes in a wireless sensor network was designed and implemented. The user's PC transmits the beacon message which will change the quick link routing according to activity status of patient in wireless sensor network. We describe the implementation for query protocol that is very effective of power saving between sensor nodes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.3
• /
• pp.389-395
• /
• 2013

Ethernet is the most widely deployed access network protocol around the world. IEEE 802.3az WG released the EEE standard based on LPI mode to improve the energy efficiency of Ethernet. This paper proposes improved adaptive power control mechanism that can enhance energy-efficiency based on EEE from small Ethernet switch. The feature of this mechanism is that it predicts the traffic characteristic of next cycle by measuring the amount of traffic flowing in during certain period and adjusts the optimal threshold value to relevant traffic load. Performance evaluation results indicate that the proposed mechanism improves overall performance compared to traditional mechanism, since it significantly reduces energy consumption rate, even though average packet delay increases a little bit.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.344-354
• /
• 2014

Transmission control protocol friendly rate control (TFRC) is designed to mainly provide optimal service for unicast applications, such as multimedia streaming in the best-effort Internet environment. However, high bandwidth networks with large delays present an environment where TFRC may have a problem in utilizing the full bandwidth. TFRC inherits the slow-start mechanism of TCP Reno, but this is a time-consuming process that may require many round-trip-times (RTTs), until an appropriate sending rate is reached. Another disadvantage inherited from TCP Reno is the RTT-unfairness problem, which severely affects the performance of long-RTT flows. In this paper, we suggest enhanced TFRC for high quality video streaming over high bandwidth delay product networks. First, we propose a fast startup scheme that increases the data rate more aggressively than the slow-start, while mitigating the overshooting problem. Second, we propose a bandwidth estimation method to achieve more equitable bandwidth allocations among streaming flows that compete for the same narrow link with different RTTs. Finally, we improve the responsiveness of TFRC in the presence of severe congestion. Simulation results have shown that our proposal can achieve a fast startup and provide fairness with competing flows compared to the original TFRC.

• International journal of advanced smart convergence
• /
• v.5 no.3
• /
• pp.61-65
• /
• 2016

In the TV broadcasting, movie production and business the transportation of video between creators (programmers, studios) and distributors (broadcast and cable networks, cable and satellites companies) is still a mix of File Transfer Protocol (FTP), physical delivery, and expensive multicast satellite. Cloud-based file sync-and-share providers like Dropbox and box are playing an increasing role, but the industry's unique demands for speed and multicasting have fueled the growth of IP Video transport. This paper gives a solid grasp of the major elements of IP video technology, including content preparation, system architecture alternatives and network performance management.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1282-1287
• /
• 2002

In this Paper, we present the design of 10Mbps HomePNA(Home Phoneline Networking Alliance) PHY which is Home Network Technology using phone-line. It is connected with external interface through MII(Media Independent Interface) and AFE(Analog Front End) Interface. 10Mbps HomePNA PHY is composed with Management Block IEEE 802.3 CSMA/CD MAC(Media Access Control) Block Modulator block and Demodulator block. For their verification, we designed a prototype FPGA PCB board using XPC860T made in Motorola. We verified HomePNA frame data transmission using a driver program based Linux kernel. we verified rate negotiation by HomepNA 2.0 Link Layer Protocol.

• Annual Conference of KIPS
• /
• 2002.04b
• /
• pp.1483-1486
• /
• 2002

Multicast protocols are efficient methods of group communication, but they do not support the various transmission protocol services like a reliability guarantee, FTP, or Telnet that TCPs do. The purpose of this dissertation is to find a method to utilize sewer routers to form multicasts that can simultaneously transport multicast packets and TCP packets. For multicast network scalability and error recovery the existing SRM method has been used. Three packets per TCP transmission control window size are used for transport and an ACK is used for flow control. A CBR and a SRM is used for UDP traffic control. Divided on whether a UDP multicast packet and TCP unicast packet is used simultaneously or only a UDP multicast packet transport is used, the multicast receiver with the longest delay is measured on the number of packets and its data receiving rate. It can be seen that the UDP packet and the TCP's IP packet can be simultaneously used in a server router.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.288-289
• /
• 2019

This paper studies the secrecy capacity for a wireless cooperative network with perfect channel state information at the relays, and receiver. A similar assumption is also made for the instance where there exist a direct link between the transmitter and receiver. Physical Layer security techniques are employed in wireless networks to mitigate against the activity of eavesdroppers. It offers a viable alternative to computationally intensive encryption. In this paper the design of a protocol utilizing jamming (via jamming nodes) for better security and relaying (via relay nodes) for the amplify-and-forward (AF) operation, is investigated. A a signal-to-noise variant of secrecy known as secrecy gap is explored because of its use of lesser computational power - preferable for practical systems. Thus we maximize this signal-to-noise approach instead of the conventional secrecy capacity maximization method. With this, an iterative algorithm using geometric programming (GP) and semi-definite programming (SDP) is presented with appreciable benefits. The results show here highlight the benefits of using fractional components of the powers of the relays to offer better secrecy capacity.