• Journal of Chest Surgery
• /
• 제24권2호
• /
• pp.182-189
• /
• 1991

Fourteen patients underwent surgical resection of bullae between February, 1987 and June, 1990 via median sternotomy. Twelve patients had spontaneous pneumothorax with previous history of pneumothorax on the contralateral side or visible bullae on chest X-ray films. Two patients had bullous emphysema. The duration of operation and admission, frequency and amount of analgesic administered for pain control, pulmonary function test [FEV1, FVC, MVV] and the amount of bleedings were compared with six cases of staged unilateral thoracotomy. The results were as follows: 1. All patients were male. 2. Mean follow up period was 13.5 month and no recurrence of pneumothorax are noted after the operation. 3. Median sternotomy showed shortened admission days than thoracotomy. [12.4$\pm$2.7, 15.6$\pm$3.1 days] 4. Significantly shortened anesthetic time in median sternotomy than thoracotomy [121$\pm$21, 184$\pm$33 minutes] 5. Median sternotomy required less injection of analgesics than thoracotomy. [6.5$\pm$2.7, 13.5$\pm$3.1 ampules] 6. Bleeding amount and PFT showed no differences. 7. Complications were prolonged air leakage for more than 7 days [2 patients], transient elevation of SGOT and SGPT[2 patients], and wound infection[1 patient]

• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.99-105
• /
• 2007

본 논문에서는 초 중 고등학교 전기시설물을 대상으로 전기안전에 대한 현장조사를 하였다. 현장조사는 수전설비, 교실, 과학실 및 음악실 등을 대상으로 연구원, 경력 15년 이상의 전기기술자 및 기타 관련 전문가에 의해 전국적으로 수행하였다. 41개 학교를 대상으로 현장조사를 실시한 결과, 수전설비의 접지방식은 공통접지방식이 지배적이었다. 위험요소로는 선풍기 조절기함의 부재, 실험대 전원의 인체보호용 누전차단기의 미설치, 비접지 콘센트의 사용 등으로 나타났다.

• The Korean Journal of Pain
• /
• 제13권2호
• /
• pp.259-262
• /
• 2000

There are many difficulties in the management of terminal cancer pain. We often encounter difficulties when nerve blocks or epidural injection of drugs do not produce good results. Local anesthetics, opioids and adjunctives, were administered to two patients intrathecally. The results were very satisfactory. It has complications such as hypotension or infection due to intrathecal route. In the first case, the pancreatic cancer patient complicated with severe epigastic pain but unfortunately no management was effective in pain control. Intrathecal injection of bupivacaine and morphine mixture was successful even if syncope which was relieved by bed rest. In the second case, the patient complicated with lower abdominal pain due to ovarian cancer who very well controlled by epidural injection of morphine and clonidine mixture but morphine demand was greatly increased. Intrathecal injection of morphine and ketamine were tried. The patient had comportable analgesic effect. CSF leakage to subcutaneous occurred but resolved by change of the catheter position or retunnelling. There were no significant complications reported in two cases.

• 한국산학기술학회논문지
• /
• 제14권5호
• /
• pp.2415-2421
• /
• 2013

개인 정보의 이용이 사회 전반적으로 보편화되면서 이에 대한 중요성이 점차 부각되고, 개인 정보 유출사례가 증가하고 있다. 여러 가지 개인 정보 유출방지 방안이 제안되었으나 프린트 출력 시 개인 정보 유출 및 제어에 있어 기존 방안들은 검출이 되지 않거나 외부로의 유출 시 개인정보가 노출이 되는 단점들이 있다. 본 논문에서는 API-Hook 방법을 사용하여 출력물에 대해 개인정보를 검출하여 제어하고, 출력 된 문서에 대해서는 마스크하여 개인정보의 노출을 보안하는 방법을 제시한다. 또한 실제로 구현하여 개인정보가 포함 된 문서에 대해 보안을 보장 여부를 확인 하였다. 보안을 위해 기밀성만을 중요시하기 보다는 가용성과의 조화가 필요하다.

• 무역상무연구
• /
• 제76권
• /
• pp.1-20
• /
• 2017

The industrial technology (including trade secrets), which is commonly understood as systematic and applied technical knowledge, can be transferred to third parties by contracting for the transfer of technology or by granting of a licence. The activity of industrial espionage, due to the gradual increase of the economic interests of intellectual property, is displaying intensively in order to gain advanced technology information. With our outstanding high technology, but compared to the level of the advanced countries, the technical protection systems, the legal protection measures and the systematic management thereof may still be insufficient. Our industrial technology outflow abroad, due to the vulnerability to the security control system in our country, has been increasing since the 2000. Computer software and SNS, such as smart devices, appear as a rapid change in the technical information environment. In order to minimize the dead zone of a new industrial security, the country's organic activity is being conducted. In 2006, Industrial Technology Outflow Prevention and Protection Law was enacted, which emphasized the responsibilities of the country. In this paper for the economic entity's efforts to prevent technology leakage oversea, I have looked to how the industrial technology can be protected in terms of national security and economic benefits of our enterprises. To solve the above-mentioned problems hereof, Korean government should willingly establish a reliable legal system for supporting to enterprise's operations, and Korean companies should autonomously introduce a synthetic technology protection system and incorporate the confidentiality clauses in an international transfer of technology agreement with third parties.

• 품질경영학회지
• /
• 제41권4호
• /
• pp.649-657
• /
• 2013

Purpose: In this study, the actual situation of domestic firms vulnerable to industrial security competence will be discussed. And accordingly be discussed for effective response measures. Methods: Using a structured questionnaire by mail, fax, e-mail and fill method was used respondents. By the end of '10 R&D Center, which holds 15,247 companies(population) among the 95% level of confidence, tolerance ${\pm}3%$ p-level corporate type, sector, region extraction method stratified multi-level companies were investigated through the final 1529. Results: The average level of industrial security capabilities 43.8%(out of 100) is very weak, so urgent and positive response measures also need to be investigated sought. Conclusion: we propose the effective management framework and improvement plans to prevent illegal industrial leakage are to be made.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.53-60
• /
• 2005

The wire rope of container crane is a important component to container transfer system and is used in a myriad of various applications such as elevator, mine hoist, construction machinery, and so on. If it happen wire rope failures in operating, it may lead to the safety accident and economic loss, which is productivity decline, competitive decline of container terminal, etc. To solve this problem, we developed the active and portable wire rope fault detecting system. The developed system consists of three parts that are the fault detecting, signal processing, and remote monitoring part. All detected signal has external noise or disturbance according to circumstances. Therefore we applied to discrete wavelet transform to extract a signal from noisy data that was used filter. As experimental result, we can reduce the expense for container terminal because of extension of exchange period of wire rope for container crane and this system is possible to apply in several fields to use wire rope.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.640-648
• /
• 2004

This paper describes a new magnetization method for non-destructive testing with magneto-optical sensor (denoted as MO sensor) which have the following characteristic : high observation sensitivity, independence of the crack orientation, and precise imaging of a complex crack geometry such as multiple cracks. When a magnetic field is applied normally to the surface of a specimen which is significantly larger than its defects, approximately the same magnetic charge per unit area occurs on the surface of the specimen. If there is a crack in the specimen, magnetic charge per unit area has the same value at the bottom of the crack. The distribution of the vertical component of the magnetic flux density, B$\_$Z/, is almost uniform over the no-crack area (denoted as B$\_$Z,BASE/), while the magnetic flux density is smaller in the surroundings of the crack(denoted as B$\_$Z,CRACK/) If B$\_$Z, BASE/ is a bit larger than the saturated magnetic flux density of the MO sensor (B$\_$s/) , then small magnetic domains occur over the crack area and a large domain over the non-crack area because B$\_$Z,CRACK/ is smaller than B$\_$s/.

• 지식경영연구
• /
• 제16권4호
• /
• pp.35-45
• /
• 2015

Fintech, which means the convergence of finance and information technology, becomes a hot topic in the financial sector. Through innovative activities on financial services, ICT(Information and Communication Technology) is integrated into the overall financial industry, and a new form of financial services could be expected to improve the existing financial system. On the other hand, fintech services are relatively vulnerable to security issues. Due to the process simplication and the channel fusion, the leakage of personal and financial informations, authentication bypass, phishing, and pharming are getting more concerned. In this study we investigated the security risk of fintech services in the viewpoints of service provider, technology adoption, and security policy. The possible countermeasures to reduce those risks are suggested because security is an important criterion for selecting financial services. This study basically offers quantification of the potential security risks and step-by-step control measures about business processes in the fintech services. The suggested security model includes user authentication, terminal security, payment information protection, API(Application Programming Interface) security, and abnormal transaction monitoring. This study might contribute to an understanding of the security risks and some possible measures for mitigating those risks on the practical perspective.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1654-1663
• /
• 2015

Compared to LC resonance, LCL resonance has distinct advantages such as a large resonant capability, low voltage and current stresses of the power device, constant voltage or current output characteristics, and fault-tolerance capability. Thus, LCL resonant compensation is employed for a movable Inductive Contactless Power Transfer (ICPT) system with a multi-load in this paper, which achieves constant current output characteristics. Peculiarly, the primary side adopts a much larger compensation inductor than the primary leakage inductor to lower the reactive power, reduce the input current ripple, generate a large current in the primary side, and realize soft-switching. Furthermore, this paper proposes an approximate resonant point for large inductor-ratio LCL resonant compensation through fundamental wave analysis. In addition, the PWM control strategy is used for this system to achieve constant current output characteristics. Finally, an experimental platform is built, whose secondary E-Type coils can ride and move on a primary rail. Simulations and experiments are conducted to verify the effectiveness and accuracy of both the theory and the design method.