• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.978-981
• /
• 1998

This paper presents a newly developed transformer-less single phase inverter for a photovoltaic (PV) power system. In the proposed system, there is no earth-leakage current at all in the theoretical base, and the main circuit of this system is rather simple and it is expected the higher efficiency will be realized. The system is operated by a digital signal processor (DSP) which makes it more flexible in the control. From the experimental results, it is found that this new inverter supplies the AC power to utility grid line with the power factor of nearly unity.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.22-24
• /
• 2006

Of all the proposed resonant techniques, the well-known phase-shifted full bridge converter remains one of the most attractive because it offers an easy way of achieving ZVS with a minimum of extra components added, which is essential for the high power applications. This paper describes the design of a digital controller for a Phase Shifted Full-bridge PWM Converter. The small-signal model is derived incorporating the effects of phase-shift control and the utilization of the transformer leakage inductance and power FET junction capacitances to achieve the zero-voltage resonant switching. Based on the derived small-signal model, the digital controller is designed in the discrete domain. The performance of designed controller is verified through the simulation.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.900-903
• /
• 2003

An identification method of induction motor parameters such as rotor time constant and mutual inductance at standstill condition is discussed assuming that stator resistance and leakage has already been obtained applying two different DC voltage and single phase voltage to the induction motor, respectively. This proposed scheme is implemented by means of Model Reference Adaptive Control (MRAC) technique, which uses a rotor flux equation in voltage model as a reference model and one in current model and is demonstrated through experiment.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.584.1-584
• /
• 2001

The purpose of this study was to evaluate the effects of various cavity configuration on bond strength and micro leakage of composite restoration. The specimens were prepared as followed; For control group(C=1), bovine teeth were wet-ground to expose flat dentin surface and in experimental groups, cylindrical cavities, same all2mm deep and 6mm in diameter(C=2.3), 4mm(C=3.0), and 3mm(C=3.7) were prepared.(omitted)

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1549-1551
• /
• 2002

현재 게이트 길이가 100nm 이하의 MOSFET 소자를 구현할 때 가장 대두되는 문제인 short channel effect를 억제하는 방법으로 제안된 소자 중 하나가 double gate (DG) silicon-on-insulator (SOI) MOSFET이다. 그러나 DG SOI MOSFET는 두 게이트간의 align과 threshold voltage control 문제가 있다. 본 논문에서는 DG SOI MOSFET에서 이상적으로 게이트가 align된 구조와 back 게이트가 front 게이트보다 긴 non-align된 구조가 subthreshold 동작 영역에서 impact ionization에 미치는 영향에 대해 시뮬레이션을 통하여 비교 분석하였다. 그 결과 게이트가 이상적으로 align된 구조보다 back 게이트가 front 게이트보다 긴 non-align된 구조가 게이트와 드레인이 overlap된 영역에서 impact ionization이 증가하였으며 게이트가 각각 n+ 폴리실리콘과 p+ 폴리실리콘을 가진 소자에서 두 게이트가 같은 work function을 가진 소자보다 높은 impact generation rate을 가짐을 알 수 있었다.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.563.1-563
• /
• 2001

The purpose of this study was to evaluate the effects of EDTA and pulsed Nd:YAG laser on apical of canal obturation. Forty-eight single-rooted teeth were used in thes study. The teeth were instrumented up to a size 40 K-file and irrigated with 2.5％ NaOCl between each file size. And the teeth were divided into 4 groups. In group A, the root canals were irrigated with a final flush of 5ml 2.5％ NaOCl as a control group.(omitted)

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.219-219
• /
• 2000

A Plate type pipe is used for heat exchange in radiator of a vehicle. The pipe has several rooms through which water flows and heat is dissipated into outside . In the case that there are small holes, cracks or some scratches on the plate, the radiators lost their functions due to Leakage. This may result in overheating of engine in a car. Thus, we need to perform the entire inspection of the plate type pipe in advance before assembling the radiator. In manufacturing process of the plate type pipe, the productive speed is very high and that may be performed continuously. So, there is no room to perform the outlook inspection by typical image processing techniques. This paper proposes a new method to inspect the outlook surface of the plate type pipe automatically with high speed. Especially, the sequential processing technique of an algorithm which detects defects on the surfaces of the plate type pipe is proposed for line scan camera which captures line image. To evaluate the inspection performance, a series of experiments is performed.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.4
• /
• pp.55-63
• /
• 2009

This paper reports on the theoretical and experimental study of the pressure ripples in a pressure unbalanced type vane pump which have widespread use in industry. Because they can infinitely vary the volume of the fluid pumped in the system by a control. Pressure ripples occur due to the flow ripples induced by geometry of side plate, leakage flow, reverse flow from the outlet volume produced by pressure difference between pumping chamber and outlet volume when the pumping chamber connected with the outlet volume. In this paper, we measured the pressure variation of a pumping chamber, reaction force on a cam ring, the mathematical model for analyzing the pressure ripples which included vane detachment and fluid inertia effects in notch area has been presented, and was applied to predict the level and the wave form of the pressure ripples according to operating conditions.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.100-101
• /
• 2000

최근에 100Hz 이하의 펄스 반복율을 가지는 20 W급 출력의 의료용 및 마킹용 펄스 $CO_2$레이저의 수요가 증가함에 따라 유지와 보수의 편리성은 물론 사용자의 편의성을 충족시키기 위한 레이저 전원장치의 소형화, 출력 제어의 용이성 및 저가격화 등에 대한 요구가 증대되고 있다. 기존의 펄스형 $CO_2$레이저의 전원장치는 원하는 펄스 반복율에 맞도록 스위칭 소자를 "on"-"off"하여 콘덴서에 충전된 에너지를 고압 펄스 트랜스를 통해서 레이저 방전관에 인가하는 방식이다. 즉 DC를 스위칭 과정을 통해 펄스 에너지로 변환시킨 후 방전관에 그 펄스에너지를 공급하는 형태이다$^{(1)}$ . (중략)

• Journal of Wetlands Research
• /
• v.2 no.2
• /
• pp.109-116
• /
• 2000

The equipment of a landfill need whole cut off facilities so that leachate generated from the landfill primarily do not leak to the ocean. Also, the whole collected leachate need a consecutive clarification treatment to discharge. A method is considered the best among the three alternatives. The merits of this method are as follows; have no secondary pollution. can cut down the expense of treatment, have good effects on preventing external leakage, don't need a leachate well, reliable quality control and easy post management. The weaknesses of this method are as follows; need a thorough survey about underground water and quality of the soil, need a special process to use as the land.