• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1083-1093
• /
• 2000

This paper is concerned with the real-time automatic tuning of the positive position feedback controller for smart structures by the genetic algorithms. The genetic algorithms haute proven its effectiveness in searching optimal design parameters without falling into local minimums thus rendering globally optimal solutions. The advantage of the positive position feedback controller is that if it is tuned properly it can enhance the damping value of a target mode without affecting other modes. In this paper, we develop for the first time a real-time algorithm for determining a tuning frequency of the PPF controller based on the genetic algorithms. To this end, the digital PPF control law is downloaded to the DSP chip and a main program, which runs the genetic algorithms in real time, updates the parameter of the controller in real time. Hence, any kind of control including the positive position feedback controller can be used in adaptive fashion in real time. Experimental results show that the real-time tuning of the positive position feedback controller can be achieved successfully. so that vibrations are suppressed satisfactorily.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.6
• /
• pp.20-26
• /
• 2002

This paper deals with the guaranteed cost control problems for a class of discrete-time linear uncertain systems with time-varying delay. The uncertain systems under consideration depend on time-varying norm-bounded parameter uncertainties. We address the existence condition and the design method of the memoryless state feedback control law such that the closed loop system not only is quadratically stable but also guarantees an adequate level of performance for all admissible uncertainties. Through some changes of variables and Schur complement, It is shown that the sufficient condition can be rewritten as an LMI(linear matrix inequality) form in terms of all variables.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1217-1222
• /
• 2010

This paper describes the Model-Based Development(MBD) process behind the flight control software of a close-range unmanned aerial vehicle(KUS-9). An integrated development environment was created using a commercial tool(MATLAB $Simulink^{(R)}$), which was utilized to design models for linear/nonlinear simulation, flight control law, operational logic and HILS(Hardware In the Loop Simulation) system. Software requirements were validated through flight simulations and peer reviews during the design process, whereas the models were verified through the application of a DO-178B verification tool. The integrity of automatically generated C code was verified by using a separate S/W testing tool. The finished software product was embedded on two different types of hardware and real-time operating system(uC/OS-II, VxWorks) to perform HILS and flight tests. The key findings of this study are that MBD Technology enables the development of a reusable and an extensible software product and auto-code generation technology allows the production of a highly reliable flight control software under a compressed time schedule.

• Journal of Digital Convergence
• /
• v.14 no.2
• /
• pp.191-196
• /
• 2016

The organizations and companies establish personal information protection policy under the law and guidelines. They carry out access control without consideration for distinctiveness of the information although the damage degree varies when the information is leaked. Considering the distinctiveness, a policy needs to be made for individuals to protect his personal information. However, he is not able to write the policy because of lack of understanding the system. To write his own policy efficiently, the system that authorizes ones according to service list provided by organizations is necessary. This paper suggests the model and method that write personal policy for his information protection based on the service list provided by organizations. Through this model, fine-grained authorization and policy change are easily made and ultimately the access control customized according to one's own information is possible.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.21-26
• /
• 2007

Output voltage waves of a DC/AC inverter system are likely to be distorted if variable loads e.g. motors or rectifiers exist in the output terminal. This paper designs a disturbance observer-based PI-controller for a single-phase inverter system that is robust against load changes. In this Paper, we regard the output voltage changes due to various loads as disturbances of the control system. Then we design a disturbance observer for estimation of the disturbances caused by the load current and any other error sources (such as parameter uncertainties and model mismatches etc.). In order to test the performance of the proposed control law, simulation studies are carried out for a single-phase inverter system using SimPowerSystem of Matlab Simuink. Compared to a simple PI-control, the disturbance observer-based controller shows enhanced performance in transient responses for step load changes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.162-169
• /
• 2011

The flight control system utilize RSS(Relaxed Static Stability) criteria in both longitudinal axes to achieve performance enhancements and improve stability. The aircraft using digital flight-by-wire flight control system receives aircraft flight conditions such as pitch, roll and yaw rate, normal acceleration from RSA(Rate Sensor Assembly) and ASA(Acceleration Sensor Assembly). These sensors has permissible measurement error related to system safety of an aircraft but, unexpected flight motions are happened by sensing errors such as offset, noise and etc. The unexpected pitch down tendency occurred by ASA sensor bias in 1g level flight with pilot hands-off. This paper addresses the design and verification of flight control law to improve of pitch down or up tendency caused by ASA sensor bias. The result of analysis and flight test reveals that pitch down tendency can be improved by pitch attitude feedback system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.21-26
• /
• 2020

A descending lifeline is the only self-escape fire apparatus for fire in high-rise buildings and is installed in most buildings according to fire-fighting law. However, it is difficult to properly use and quickly evacuate during an emergency due to its complex installation methods and procedures, even if users are pre-educated. In this paper, a new one-touch descending lifeline, which simplifies usage procedures and can be used regardless of whether users are educated, is proposed to solve the drawbacks of the conventional descending lifeline. All separate parts that require additional installation are initially assembled in a box, and the concept of a double square linkage is proposed to enable escape in a single motion of pushing the handle attached to the box. Three steps of kinematic design are explored to determine an appropriate configuration of double square linkage, and its dimensions are determined using Matlab and NX CAD software. The proposed all-in-one descending lifeline also follows the enforcement decree of the Fire Control Act, and its feasibility is verified through fabrication.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Journal of Distribution Science
• /
• v.11 no.5
• /
• pp.55-62
• /
• 2013

Purpose - This study aims to determine the problems and limitations of the Commercial Area Activation System, which was created by a special law for promoting traditional markets and shopping districts to revitalize and efficiently manage the central commercial area in different regions. We also suggest different options for its improvement. Research design, data, and methodology - We also look into the problems of which is being promoted as a demonstration project, from the aspects of legal text and guidelines. Results - The current commercial area activation system has several problems. First, the establishment of a comprehensive basic plan on the commercial area activation is not a requirement. Second, the benefit principle should be established to prevent the moral laxity of merchants who serve important roles in the main components of the commercial area activation business when they conduct their business. Third, the current special law constrains the commercial management organization, as under the civil law yields a limitation on finding a profitable business model. Fourth, to efficiently, constructing a system that links the other central government businesses and is needed. into a regional development budget or a budget for funding small businesses that the central government can control, which is effective. Further, we offer some suggestions for medium- and long-term policies. First, an integrated coordination mechanism at the central office level should be installed while setting the basic policy to revitalize the Based on this policy, local governments need a system that exclusively based on the after establishing a comprehensive plan for urban regeneration and getting approval from the integration organization. Second, a system that enables an understanding of the problems with business promotion by monitoring the procedure of supporting projects and regularly assessing business achievements is needed. Third, a plan is needed for resolving conflicts between various interested parties that adopts the commercial area activation system for carrying out a total redevelopment of the commercial area where small shops are densely located. A market maintenance project has been conducted as a means to recover our traditional market, which was economically depressed, and to revive the local economy, but it is mostly conducted in the form of reconstruction or redevelopment and represents the interests of landowners and merchants. Thus, it is most likely to lead to a gradual disappearance of traditional markets. Conclusions - This study looks primarily into the problems that appeared in the legal text or the guidelines regarding the direction of improvement of the commercial area activation business that has been going on as a demonstration project since 2011 and suggests some solutions.

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.97-103
• /
• 1992

Since many design problems in the railroad, aerospace and machine structures involve considerations of the effect of cyclic loading, manufacturing and quality control processes much fully account for fatigue of critical components. Due to the sensitivity of the Paris law, it is very important to calculate .DELTA.K numerically to minimize the error of predicted fatigue life in cycles. However, it is shown that the p-version of FEM based on LEFM analysis is far better suited for computing the stress intensity factors than the conventional h-version. To demonstrate the proficiency of the proposed scheme, the welded T-joint with crack problems of box car body bolster assembly and a crack problem emanating from a circular hole in finite strip have been solved.