• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.755-765
• /
• 2015

A thermostatically controlled load (TCL) can be one of the most appropriate resources for demand response (DR) in a smart grid environment. DR capability can be effectively implemented in a TCL with various intelligent control methods. However, because traditional on-off control is still a commonly used method in a TCL, it is useful to develop a method for adding DR capability to the TCL with an existing on-off controller. As a specific realization of supervisory control for implementing DR capability in the TCL, two methods are proposed - a method involving the changing of a set point and a method involving the paralleling of an identified system without delay. The proposed methods are analyzed through the simulations with an electric heater for different power consumption levels in the on-state. Considerable cost benefit can be achieved with the proposed methods when compared with the case without DR. In addition, the observations suggest that a medium power consumption level, instead of the maximum power, in the on-state should be used for consistently obtaining the cost benefit without severe temperature deviation from the specified temperature range for DR.

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.109-114
• /
• 2004

A new code and its decoding scheme are proposed. With this code, we can correct and detect the errors in communication systems. To limit the runlength of data 0 and augment the minimum density of data 1, a (15, 7) BCH code is modified and an overall parity bit is added. The proposed code is a (16, 7) block code which has the bit clock signal regeneration capability and high error control capability. It is proved that the runlength of data 0 is less than or equal to 7, the density of data 1 is greater than or equal to 1/8, and the minimum Hamming distance is 6. The decoding error probability, the error detection probability and the correct decoding probability are presented for the proposed code. It is shown that the proposed code has better error control capability than the conventional schemes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.2
• /
• pp.175-181
• /
• 2009

All of the military aircrafts in Korea Air Force are administered and operated together in the same system regardless of whether they are equipped with the data communication capability or not. The absence of the data communication capability in some of the aircrafts might increase whole kill chain hour at the point of the Network Centric Warfare achievement. Network synergy effects cannot also be desired if the section which is not connected to the network influences to the whole tactical network. Equipping aircrafts with the data communication capability could be done by upgrading the aircrafts, but resulting in high costs and long updating time. This paper is a research about the design and implementation of the UMPC based Data Link System to aircrafts that do not have the data communication capability. The proposed system grafts the UHF-based wireless modem technology and the aircraft flight mission support software onto the off-the-shelf UMPC and GPS system. The employed UHF radio equipment allows communicating tactic data with another aircrafts on the air, the ground control point, and even the Tactical Air Control Party(TACP) control vehicle that achieve missions with aircrafts. It thereby increases such capabilities as navigation aid, situation awareness, quick target identification and attack. We also applied Closed Air Support(CAS) scenarios, which is very close to the real environment, to the experiments of the proposed system. The experimental results show that the proposed system could support the data communication capability effectively and the flight mission at low costs of money and time.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.90-94
• /
• 1998

The parallel inverter is popularly used because of its fault-tolerance capability, high-current outputs at constant voltages and system modularity. The conventional parallel inverter usually employes active and reactive power control or frequency and voltage droop control. However, these approaches have the disadvantages that the response time of parallel inverter control is slow against load and system parameter variation to calculate active, reactive power, frequency and voltage. This paper describes a novel control scheme for power equalization in parallel connected inverter. The proposed scheme has a fast power balance control response, a simplicity of implementation, and inherent peak current limiting capability since it employes a instantaneous current/voltage control with output voltage and current balance and output voltage regulation. A design procedure for the proposed parallel inverter controller is presented. Futhermore, the proposed control scheme is verified through the simulation in various cases such as the system parameter variation, the control parameter variation and the nonlinear load condition.

• Fashion & Textile Research Journal
• /
• v.9 no.5
• /
• pp.507-515
• /
• 2007

The purpose of this study was to investigate conditions conducting continuous business of men and women manager owned small apparel stores, and to compare differences on demographical characteristics of the managers, and then to reveal what conditions were important to make a profit in future by gender. Data were collected from 150 (71 from men and 79 from women) managers owned small apparel stores in Busan. The results showed as follows; Conditions conducting continuous business of women and men manager were five factors such as manger's commitment, grasping capability of the trend, employee, planning and capability on financial control. There were significant differences in the perception of gender, education, managerial period, non employment/employment and non experience/experience between women and men manager on the conditions. Also, in this study we revealed that men importantly perceived planning factor and women grasping capability of the trend to make a profit in future.

• Journal of Digital Contents Society
• /
• v.11 no.3
• /
• pp.349-356
• /
• 2010

This study was to develop improving vocational basic skill program and content which are basic of instruction-learning ability for the vocational education substantiality. To pursue this goal, 'self-development capability' among vocational basic skills was developed through the research methodology and procedure. The interpersonal relation capability was selected as one of vocational basic skill areas when it was more effective by e-learning contents through literature review, expert conference etc. The self-development capability can be self-control and development under performing business tasks. In this study, self-development capability was programmed a interpersonal scheme, a cooperative capability, a leadership capability, a conflict management, negotiation capability, and a customer service capability. Especially this program was developed as a form of e-Learning contents focusing on improving problem solving under real case using multimedia strategies such as movies, simulation, game.

• Journal of Engineering Education Research
• /
• v.16 no.6
• /
• pp.38-44
• /
• 2013

This study has the purpose to identify the correlation of engineering education major college students' technological problem solving tendency between technological problem solving capability. To that end, the technological problem solving tendencies of 79 students enrolled in engineering education related department in college of education, 'C' University located in Daejeon metropolitan city were examined, and the correlation of technological problem solving tendency between technological problem solving capability was analyzed through measurement of technological problem solving capability. As for the correlation among problem solving confidence a sub-element of technological problem solving tendency and technological problem solving capability, positive correlation was found in result 3, result 4 and result average. As for the correlation among approach-avoidance tendency a sub-element of technological problem solving tendency and technological problem solving capability, positive correlation was found in result 5 and result average. As for the correlation among self-control recognition degree the sub-element of technological problem solving tendency and technological problem solving capability, positive correlation was found in result 1, result 3 and result average. As for the correlation among problem solving tendency and technological problem solving capability, positive correlation was found in result 3, result 4, result 5 and result average.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.176-181
• /
• 1998

The parallel inverter is popularly used because of its fault-tolerance capability, high-current outputs at constant voltages and system modularity. The conventional parallel inverter usually employs active and reactive power control of frequency and voltage droop control. However, these approaches have the disadvantages that the response time of parallel inverter control is slow against load and system parameter variation to calculate active, reactive power, frequency and voltage. This paper describes a novel control scheme for power equalization in parallel-connected inverter. The proposed scheme has a fast power balance control response, a simplicity of implementation, and inherent peak current limiting capability since it employees an instantaneous current/voltage control with output voltage and current balance and output voltage regulation. A design procedure for the proposed parallel inverter controller is presented. Furthermore, the proposed control scheme is verified through the experiment in various cases such as the system parameter variation, the control parameter variation and the nonlinear load condition.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.273-274
• /
• 2012

This paper investigates control algorithms for a doubly fed induction generator(DFIG) with a back-to-back three-level neutral-point clamped voltage source converter in medium voltage wind power system under unbalanced grid conditions. Two different control algorithms to compensate for unbalanced conditions are proposed. Evaluation factors of control algorithm are fault ride-through(FRT) capability, efficiency, harmonic distortions and torque pulsation. Zero regulated negative sequence stator current control algorithm has the most effective performance concerning FRT capability and efficiency. Ripple-free control algorithm nullifies oscillation component of active power and reactive power. Ripple-free control algorithm shows the least harmonic distortions and torque pulsation. Combination of zero regulated negative sequence stator current and ripple-free control algorithm control algorithm depending on the operating requirements and depth of grid unbalance presents the most optimized performance factors under the generalized unbalanced operating conditions leading to high performance DFIG wind turbine system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.146.2-146
• /
• 2001

Recently, a need of non-industrial robot, such as service, medical, entertainment and house-keeping robot, has been increased. Therefore, the capability of robot which can do intelligent behavior like interaction with men and its environment become more prominent than the capability of executing simple repetitive task. To implement an intelligent robot which provides intelligent behavior, an effective system architecture including perception, learning, reasoning and action part is necessary. Control architectures for intelligent robot can be divided into two different classes. One is deliberative type controller which is applicate to high level intelligence like environment ...