• Korean Journal of Veterinary Research
• /
• v.45 no.1
• /
• pp.105-111
• /
• 2005

Canine sarcoptic mite (Sarcoptes scabiei var. canis) is ectoparasite which burrow usually in the stratum corneum of the skin of dogs. Antigens from the burrowing mites induce humoral and cellmediated immune responses in the hosts. The effect of antigenecity induced by somatic antigens of house dust mite (Dermatophagoides pteronyssinus) isolated by continuous elution has been evaluated in canine sarcoptic mites infestation. Continuous elution was carried out in 7.5% SDS-PAGE to isolate proteins of common antigens from somatic antigens of house dust mite. These eluted proteins from somatic antigens of house dust mite were confirmed by Western blotting in 7.5% SDS-PAGE, and eluted proteins (65, 60 kDa) were isolated. To evaluate the antigenetic effect of eluted proteins, eight dogs were divided as 4 groups such as non-vaccinated and non-challenged control (Group I), challenged control (Group II), vaccinated (Group III), and vaccinatedandchallenged (Group IV) groups. Group II and IV were artificially infested canine sarcoptic mites. Group III and IV were immunized with eluted proteins (65, 60 kDa). At the 6th week of the vaccination, the antibody titers of Group of IV were statistically significant higher than those of Group II (p<0.05). And antibody titers of Group III were also statistically significant higher than those of Group I (p<0.05). From these result, it is possible to replace somatic antigens of canine sarcoptic mites with eluted proteins from somatic antigens of house dust mites in order to diagnose and prevent the canine sarcoptic mite infestations.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.711-715
• /
• 1990

Continuous column chromatographic separation of lysozyme from egg white was investigated. A weak acid type cation exchange resin, Duolite C-464, was used because of high lysozyme recovery and ease of column operation in this experiment. The resin was equilibrated at $pH\;7.9{\pm}0.1$ in Na+form. Continuous lysozyme separation was processed by repeating cycles(one cycle : resin equilibration, flow egg white, rinse, lysozyme elution) in automated preparative Liquid Chromatography(LC) system(column size ; i.d. 50 mm, resin bed volumn ; 1020 ml). At comparison of UV levels in rinse end point and elution end point of every cycle, the UV levels of rinse end point are maintained below 30% for 19 cycles and that of elution end point are also maintained below 30% for 17 cycles, stably, but was increased above 50% after 18 cycle. That indicated the eluting ability of lysozyme was reduced conspicuously after 18 cycle in continuous cycling process. The recovery of lysozyme was maintained above 90% from one to 17 cycle, but was decreased to 72% and 65% in 18 cycle and 19 cycle, respectively.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.577-586
• /
• 2017

One of the major sources causing eutrophication and algal blooms of lakes or streams is phosphorus which comes from point and nonpoint pollution sources. HAP (hydroxyapatite) crystallization using granular alkaline materials can achieve the decrease of phosphorus load from wastewater treatment plants and nonpoint pollution control facilities. In order to induce HAP crystal formation, continuous supply of calcium and hydroxyl ions is required. In this research, considering HAP crystallization, several types of lime-based granular alkaline materials were prepared, and the elution characteristics of calcium and hydroxyl ions of each were analyzed. Also, column tests were performed to verify phosphorus removal efficiencies of granular alkaline materials. Material_1 (gypsum+cement mixed material) achieved the highest pH values in the column tests consistently, also, Material_2 (gypsum+slag mixed material) and Material_3 (calcined limestone material) achieved over pH 9.0 for 240 hours (10 days) and proved the efficiencies of long-term ion supplier for HAP crystallization. In the column tests using Material_3, considerable pH increase and phosphorus removal were carried out according to each linear velocity and filtration depth. T-P removal efficiencies were 87.0, 84.0, 68.0% and those of PO4-P 100.0, 97.0, 80.0% for linear velocity of 1.0, 2.5, 5.0 m/hr respectively. Based on the column test results, the applicability of phosphorus removal processes for small-scale wastewater treatment plants and nonpoint pollution control facilities was found out.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.53-59
• /
• 2012

In this study, strength and durability of a geo-polymer grout material(HIT) was investigated through unconfined compression strength tests(UCS)), scanning electron microscope(SEM), elution tests, and surface observations. UCS tests showed high initial strength and rapid continuous strength increments when compared to labile wasser glass(LW) and space grouting rocket system (SGR) grout materials, which showed strength reduction after 28 days. The higher strength was also reflected in SEM results which showed calcium silicate hydroxide(C-S-H) gels of the dense hydrate range, indicating higher strength and durability. Additionally, elution tests and grout surface observations showed HIT was in good condition and the decrease in weight was minor when under water for six months. LW and SGR showed the grout surface to be constricted and lower durability due to higher weight increase. These results and observations show HIT to be better suited for coastal structural applications than LW and SGR in long terms of strength and durability.

• Journal of Life Science
• /
• v.21 no.11
• /
• pp.1565-1572
• /
• 2011

Eye-specific lactate dehydrogenase (EC 1.1.1.27, LDH) $C_4$ isozyme in the eyes of greenlings (Hexagrammos otakii) was successfully purified by affinity chromatography and continuous-elution electrophoresis. The molecular weight of the purified eye-specific LDH $C_4$ isozyme was 154.8 kDa, as determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis. Optimal pH for enzymatic reaction of the eye-specific LDH $C_4$ isozyme was pH 8.5. $K^{PYR}_m$ value of the purified eye-specific LDH $C_4$ isozyme was $1.88{\times}10^{-5}$ M using pyruvate as a substrate. These results indicate that we must consider pH when measuring eye-specific LDH $C_4$ isozyme activity. The eye-specific LDH $C_4$ isozyme had a higher binding affinity for the substrate as a pyruvate than LDH A4 isozyme. Antibodies produced against the purified eye-specific LDH $C_4$ isozyme may be used in the diagnosis of several human diseases and in comparative physiological studies of fishes.

• KSBB Journal
• /
• v.5 no.2
• /
• pp.141-149
• /
• 1990

$\beta$-glucosidase derived from Aspergillus niger was immobilized by (1) covalent linkage on chitin and chitosan with glutaraldehyde, (2) adsorption on DEAE-cellulose and Amberite IRA93 after succinylation, and (3) entrapment on alginate and polyacrylamide gels with various cross linking agents. The retention yield of $\beta$-glucosidase immobilized on chitosan was 31.5% and operational stability was 69% after continuous operation at column reactor(5$0^{\circ}C$ at pH 4.8) for 15 days. The retention yield and operational stability were 24.7% and 60% respectively, in adsorption on Amberite IRA 93. On the other hand, the entrapment method by alginate and polyacrylamide gel was identified to be not appropriate due to the continuous elution of inlmobilized $\beta$-glucosidase. Optimum conditions for the immobilization on chitosan were also studied with optimum pH of 4.8 and glutaraldehyde concentration of 0.4%(w/v). The properties and stability of immobilized $\beta$-glucosidase are also investigted. The conversion yield of cellobiose to glucose was also analyzed using the column type enzyme reactor to evaluate the effectiveness of immobilized enzyme.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.452-454
• /
• 1995

Chitin and chitosan from red crab and squid pen were applied as adsorbents for trapping the dyes in wastewater from dyeworks. We found that the chitin and chitosan were effective adsorbents for the dyes discarded from dyeworks. Chitosan was more effective in dye adsorption than chitin. In a continuous elution column experiment, 1 kg of chitosan could be used for treatment of upto 120 L of wastewater containing 0.05% dye wasted from dyeworks at 75% efficacy, that means 45g dye was adsorbed per kg chitosan.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.1
• /
• pp.45-55
• /
• 2020

Objective : Fibrin sealants have been used for hemostasis, sealant for cerebrospinal fluid leakage, and adhesive barrier in neurosurgery. Further, as its clinical use and role of an effective drug delivery vehicle have been proposed. This study was performed to measure antibacterial activity and continuous local antibiotic release from different concentrations of vancomycin-impregnated fibrin sealant in vitro. Methods : Antibacterial activity was investigated by disk diffusion test by measuring the diameter of the growth inhibition zone of bacteria (methicillin-resistant Staphylococcus aureus, ATCC29213) from vancomycin-embedded fibrin sealant disc diluted at five different concentrations (C1-C5; 8.33, 4.167, 0.83, 0.083, and 0.0083 mg/disc, respectively). Continuous and conditioned release of vancomycin concentration (for 2 weeks and for 5 days, respectively) were also measured using high-performance liquid chromatography (HPLC) method. To mimic the physiologic wound conditions with in vitro, conditioned vancomycin release in phosphate buffer solution (PBS) was measured and replaced PBS for five consecutive days, half a day or completely daily. Results : In the disk diffusion test, the mean diameters of bacterial inhibition zone were 2.54±0.07 cm, 2.61±0.12 cm, and 2.13±0.15 cm (C1, C2, and C3 respectively) but 1.67±0.06 cm and 1.23±0.15 cm in C4 and C5, respectively. Continuous elution test elicited the peak release of vancomycin from the fibrin sealant at 48 hours, with continued release until 2 weeks. However, conditioned vancomycin release decreased to half or more on day 2, however, the sustainable release was measured over the therapeutic dose (10-20 ㎍/mL) for 5 days and 4 days in assays of half and total exchange of PBS. Conclusion : This study suggests that fibrin sealant can provide an efficient vehicle for antibiotic drug release in a wide range of neurosurgical procedures and the safe and effective therapeutic dose will be at the concentration embedded of 4.167 mg/disc or more of vancomycin.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.327-337
• /
• 2017

A continuous low temperature ($510^{\circ}C{\sim}530^{\circ}C$) pyrolysis experiment in a pilot-scale of 85.3 kg/hr was carried out by the mixed feedstock of half dried digested sewage sludge and waste plastics. As a result, the amount of pyrolysis gas generated was maximum 68.3% of input dry mass and scored $40.9MJ/Nm^3$ of lower heating value (LHV), and the percentage of air inflow caused by continuous pyrolysis was 19.6%. The oil was produced 4.2% of the input dry mass, and the LHV was 32.5 MJ/kg. The sulfur and chlorine contents, which could cause corrosion of the facility, were found to be 0.2% or more respectively. The carbide generated was 27.5% of the input dry mass which shows LHV of 10.2 MJ/kg, and did not fall under designated waste from the elution test. The concentration of carbon monoxide, sulfur oxides and hydrogen cyanide of emitted flu gas from pyrolysis gas combustion was especially high, and dioxin (PCDDs/DFs) was within the legal standards as $0.034ng-TEQ/Sm^3$. Among the 47 water pollutant contents of waste water generated from dry flue gas condensation, several contents such as total nitrogen, n-H extract and cyanide showed high concentration. Therefore, the merge treatment in the sewage treatment plants after pre-treatment could be considered.

• Resources Recycling
• /
• v.21 no.5
• /
• pp.50-57
• /
• 2012

A comparative study has been carried out on the removal of impurities such As, Sb, Bi from the copper sulfate solution by ion exchange resin containing aminophosphosphonic acid as functional group. The various parameters which affect the removal of impurities; such as the reaction temperature, the reaction time, the amount of ion-exchange resins, the concentration of sulfuric acid in electrolyte, were studied. The basic experimental results showed that about 88% of Sb & 94% of Bi can be adsorbed in these chelate resins and removed from the copper sulfate solutions but As was removed below 10% from the solutions. And the selective elution of Bi and Sb from the adsorbed ion exchange resin also can be achieved by $H_2SO_4$ or HCl solutions. The results also showed that 98.1% of Sb and 96.6% of Bi can be adsorbed from the copper sulfate solutions after 2 Bed-volume of continuous ion exchange column test.