• Journal of Biosystems Engineering
• /
• v.35 no.2
• /
• pp.116-123
• /
• 2010

Rapid detection of foodborne pathogens has been a major challenge for the food industry. Salmonella contamination is well known in all foods including pasteurised milk. The possibility of specific detection of Salmonella Enteritidis by surface plasmon resonance (SPR) biosensor was explored using a commercially available portable SPR sensor. Self assembly technique was adopted to immobilize anti-Salmonella antibodies on the gold sensing surface of the SPR sensor. The concentration of polyclonal antibody for use in the SPR biosensor was chosen to 1.0 mg/mL. Experiments were conducted at near real-time with results obtained for one SPR biosensor assay within 1 hour. The limit of detection for Salmonella Enteritidis was determined to be $10^6$ CFU/mL in both PBS buffer and milk samples. The assay sensitivity was not significantly affected by milk matrix. Our results showed that it would be possible for employing the SPR biosensor to detect Salmonella Enteritidis in near real-time.

• Journal of Plant Biotechnology
• /
• v.33 no.4
• /
• pp.263-270
• /
• 2006

Pongamia pinnata Pierre is a tree legume, having potential in production of raw material for biodiesel. A protocol for in wk propagation of this plant was standardized using seedling explants. Growth regulators (GR) including gibberellic acid $(GA_3),\;N^6-benzylaminopurine(BA)$, thidiazuron (TDZ), and Adenine sulphate (Ads) were tested for optimum germination of seeds. Removal of seed coat prior to germination, controlled fungal growth partially but enhanced bacterial growth. Antibiotic cefotaxime was ineffective in controlling bacterial contamination. Seedling derived nodal explants and cotyledon nodes with attached cotyledons were excised and cultured for induction of shoots. Optimum sprouting and multiplication of shoot buds were obtained in MS medium supplemented with $8.88{\mu}M$ BA. These buds differentiated and rooted on medium devoid of GR. Optimum growth of Pongamia seedling was obtained in cotton plugged culture vessels. Reculturing of the cotyledon node explants produced more shoots from the same site. This process of removing shoots and reculturing of cotyledon node was followed for eight passages yielding 4 to 8 shoots in each cycle. The shoots (75%) rooted on half strength MS basal medium supplemented with 0.22% charcoal. All plants survived on transfer to soil. This is the first report on in vitro regeneration of Pongamia pinnata. This report demonstrates the possibility of coupling more than one parameter in single experiment to hasten the process of standardization. The process of cycling the nodal explant repeatedly for production of large number of shoots from single meristem may find application in genetic transformation experiments wherein meristems are used for transformation.

• The Journal of the Korean Society for Microbiology
• /
• v.10 no.1
• /
• pp.33-37
• /
• 1975

In view of the warmth and hunidity in Korea, there is little possibility to avoid the fungal contamination of rice soybean paste which are major foodstuffs in this country. In order to isolate aflatoxin producing fungi from these foodstuffs, 6 samples of rice were collected from the farmhouses at Cbangsung and 40 samples of soybean paste in Seoul areas. The peptone glucose chloramphenicol, Czapek-Dox agar and malt agar were used for the isolation and identification of fungi, and Adye and Meteles medium and/or Sahouraud medium for the production of toxins. The cultures for the toxin production were done at $25^{\circ}C$ for $5{\sim}7$ days. Eleven Penicillium species were isolated. from 6 samples of rice, and 37 Aspergillus flavus, 48 Aspergillus species, 1 Penicillium species and 105 others were isolated from 40 samples of soybean paste. Among these, one Penicillium species isolated from rice was found to be aflatoxin producing strain, and the toxin was quantitatively measured. Aflatoxin appeared to be more favorably produced in the glucose Sabouraud medium than in the Adye and Meteles medium.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.5
• /
• pp.455-461
• /
• 1999

The possibility of wine making from soft and dried persimmon and the effects of treatment for persimmon on the quality of wine have been investigated. Soft persimmon was pretreated by two method of heat and hydrochloric acid treatment. Fermentation mash was composed of 12% persimmon and 15% of sucrose and was fermented at 17$^{\circ}C$ for 36 days. The fermentation using persimmons which were untreated and treated by acid was not successful because of contamination caused by lactic acid and acetic acid bacteria. Acidity of the fermented broth produced from boiled dried acid treated and untreated persimmon was 4,4, 5.0, 5,8 and 13.5ml(0.1N NaOH/10ml broth) respectively. Ethanol concentration of the fermented broth produced from boiled dried acid treated and untreated persimmon was 11.2, 10.0, 9.4 and 6.1% v/v respectively. The wine fermented for 28day's fermentation using boiled persimmon as substate had the best quality and stability. After 36day's fermentation using boild persimon following composition was obtained: 4.65% of total sugar 3.65% of reducing sugar 0.03mg/ml of protin 0.17$\mu$/ml of amino acid and 13.02 $\mu$g/ml of pectin. The pH and yeast cell of the boiled persimmon broth were 3.4 and 5.75 logCFU/ml. Fermented wine using dried persimmon had aslo good quality but the fermentation rate was slow.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.4
• /
• pp.59-64
• /
• 2005

Although high pressure discharge method is widely used for improving soft ground, it has various problems including lack of strength increase and the possibility of water pollution and soil contamination. MJM(Morta Jet Method) uses sand in addition to cement as the injection material. MJM uses triple rods with a built-in nozzle that allows easier discharge of the slime, resulting in higher replacement area ratio and more uniform formation of pillar hydrates, and thus results in significant increase in strength. MJM is expected to perform especially well as piles in marine clays. This study investigates the field applicability of the MJM through extensive laboratory and field tests.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.1
• /
• pp.6-11
• /
• 2016

For high volume manufacturing using extreme ultraviolet (EUV) lithography, mask protection from contamination during lithography process must be solved, and EUV pellicle is the strongest solution. Based on the technical requirements of EUV pellicle, EUV pellicle should have large membrane area ($110{\times}140mm^2$) with film transmittance over 90% and mechanical stability. Even though pellicle that satisfies size standard with high transmittance has been reported, its mechanical stability has not been confirmed, nor is there a standard to evaluate the mechanical stability. In this study, we suggest a rather simple method evaluating mechanical stability of pellicle membrane using spin-coater which can emulate the linear accelerated motion. The test conditions were designed by simulating the acceleration distribution inside pellicle membrane through correlating the linear acceleration and centripetal acceleration, which occurs during linear movement and rotation movement, respectively. By these simulation results, we confirmed the possibility of using spin-coater to evaluate the mechanical stability of EUV pellicle.

• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.309-316
• /
• 2003

EAF(Electric Arc Furnace) Dust classified as special wastes containing heavy metal contaminants may cause to damage an environment such as underground water contamination if they were not treated properly. The possibility of producing the porous sintered body made from EAF Dust/clay composition system was studied. Mixing of EAF Dust and clay was carried out using wet-mixing process and two different sintering methods such as rapid and normal heat treatment were tried. By observing density, porosity and microstructure of sintered bodies, it was found that the bloating phenomenon depend on the contents of C, where the liquid phase occur or not during the sintering process. To obtain a light-aggregate of porous body due to bloating, the rapid heating was better than the normal heating at sintering process.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.63-69
• /
• 2012

Sediment has been increasingly acknowledged as a carrier in water system and an available contamination. For this reason, dredging of sediment in reservoir to remediate water quality and secure storage capacity is conducted annually. However, disposal of numerous dredged sediment is necessary as a secondary problem. Currently, in Korea, dredged sediment is classified as waste to be reclamated or recycled into sandy soil, however, they are still in trouble because of spacial and environmental problem. Therefore, rather than simple disposal or reuse into sandy soil, it is necessary to research on method to manage main cause of pollution and increase the value as a resource. In this study, we intend to develop a recycle technology for numerous dredged sediment produced by dredging in deteriorated reservoirs using solidificator (stabilizer). To achieve this, we will consider utilization of dredged sediment and evaluation of use possibility as natural recycle by analysis the characteristics of soil-solidificator mixture in terms of physicochemical properties and the mixing ratio between sediment and solidificator.

• Food Science of Animal Resources
• /
• v.41 no.5
• /
• pp.883-893
• /
• 2021

Clostridium difficile present in feces of food animals may contaminate their meats and act as a potential source of C. difficile infection (CDI) to humans. C. difficile resistance to antibiotics, its production of toxins and spores play major roles in the pathogenesis of CDI. This is the first study to evaluate C. difficile prevalence in retail raw animal meats, its antibiotics susceptibilities and toxigenic activities in Al-Jouf, Saudi Arabia. Totally, 240 meat samples were tested. C. difficile was identified by standard microbiological and biochemical methods. Vitek-2 compact system confirmed C. difficile isolates were 15/240 (6.3%). Toxins A/B were not detected by Xpect C. difficile toxin A/B tests. Although all isolates were susceptible to vancomycin and metronidazole, variable degrees of reduced susceptibilities to moxifloxacin, clindamycin or tetracycline antibiotics were detected by Epsilon tests. C. difficile strains with reduced susceptibility to antibiotics should be investigated. Variability between the worldwide reported C. difficile contamination levels could be due to absence of a gold standard procedure for its isolation. Establishment of a unified testing algorithm for C. difficile detection in food products is definitely essential to evaluate the inter-regional variation in its prevalence on national and international levels. Proper use of antimicrobials during animal husbandry is crucial to control the selective drug pressure on C. difficile strains associated with food animals. Investigating the protective or pathogenic potential of non-toxigenic C. difficile strains and the possibility of gene transfer from certain toxigenic/ antibiotics-resistant to non-toxigenic/antibiotics-sensitive strains, respectively, should be worthy of attention.

• Korean Journal of Ecology and Environment
• /
• v.55 no.3
• /
• pp.251-257
• /
• 2022

Monitoring and assessing aquatic ecosystems using the behavior of organisms is essential for sustainable ecosystem management. Oligochaetes, which inhabit various freshwater ecosystems, are frequently used to evaluate the environmental conditions of freshwater ecosystems. Tubifex tubifex (Müller, 1774) (Oligochaeta, Tubificidae) is tolerant to organic pollution and has been used to evaluate the toxicity of toxicants, including heavy metals. We studied the behavioral responses of T. tubifex to three different copper concentrations (0.1, 0.5, and 1.0 mg L^-1). The specimens were exposed to copper in an observation cage containing 150 mL of dechlorinated water. Movement behavior (diameter, speed, acceleration, meander, and turning rate) was continuously observed for two hours before and after the copper treatments. After the treatments, the diameter shrank and showed rapid twisting movement under all the copper conditions. The turning rate had a positive correlation with meander and acceleration both before and after treatment at all three concentrations, whereas speed and meander had a negative correlation. Length and turning rate also showed a negative correlation. The correlation coefficient between speed and acceleration in the highest copper concentration changed from positive before treatment (r=0.64) to negative (r= -0.52) after treatment. Our results present the possibility of using behavioral parameters to detect copper contamination in freshwater ecosystems.