• 제목/요약/키워드: contact service

검색결과 544건 처리시간 0.023초

해양 부이용 920 MHz 대역 안테나 (920 MHz Band Antenna for Marine Buoy)

  • 최형동;김성율;이성렬
    • 한국항행학회논문지
    • /
    • 제24권6호
    • /
    • pp.593-600
    • /
    • 2020
  • 해양 IoT 서비스를 위한 장치들은 해양 환경에 강인해야 한다. 특히 바닷물 속에 부유하는 전송 장치는 바닷물의 영향을 덜 받도록 설계되어야 한다. 본 연구에서는 전자 어구 실명제 모니터링 시스템에서 어구 상태를 감시하는 부이에 내장되는 안테나를 설계하고 제작한 결과를 보이고 있다. 안테나의 주파수 대역은 920 MHz이고, 부이의 초소형과 경량화를 위해 PCB 패턴 안테나 구조로 설계 제작되었다. 시뮬레이션 결과 제안한 안테나를 내장한 부이가 바닷물 속에 잠기는 정도가 심할수록 반사 계수 증 RF 특성이 저하되지만 빔의 방사 각도는 안테나 하층부에서 점점 상층부로 옮겨가는 것을 확인하였다. 즉 바닷물의 영향을 많이 받을수록 전파 성능은 저하되지만 방사 특성은 해양 IoT 서비스 환경에 적합하다는 것을 확인하였다. 향후 RF 성능을 개선할 수 있는 안테나 구조를 변경 설계하면 제안한 안테나와 부이는 LPWA (low power wide area) 기반 IoT 네트워크 구현에 기여할 것으로 기대된다.

3D-printed Face Shields for Healthcare Professionals Battling COVID-19 Pandemic

  • Kim, Gyeong-Man;Assefa, Dawit;Kang, Joon Wun;Gebreyouhannes, Esayas
    • 적정기술학회지
    • /
    • 제6권2호
    • /
    • pp.226-237
    • /
    • 2020
  • As the number of reported COVID-19 cases rises around the world, regions affected by the virus are taking serious measures to contain its spread. Face shields are one of the highest-need personal protective equipment (PPE) during COVID-19 pandemic. Beyond traditional face masks, as known cases of the coronavirus soar, currently there is a significant shortage of face shields around the world. In response, the protective face shields were designed and fabricated with open-source 3D modelling software and 3D printing technology, respectively. Our face shield consisted of two parts only; a reusable 3D printed headband and a visor made of transparent plastic sheet, as barrier. The resulting 3D printed face shields are affordable, lightweight, one-size-fits-most and ready-to-wear with minimal assemblies, and go on easily over glass, goggle and face mask. To ensure being donated to the healthcare professionals without risk infected by any pathogens, the 3D printed face shields were successfully be disinfected with ultraviolet germicidal irradiation (UVGI dosage of 1000 mJ/cm2) and 70% alcohol. For routine disinfection a UVGI chamber was designed and optimized to provide uniform UV-C illumination with an appreciated fluence for complete decontamination. More than 1,000 face shields were produced already and donated to the special hospitals for COVID-19 patients, quarantines, government and medical agencies in Ethiopia as well as in East-African countries. With certainty, our intention goes beyond the hospitals and other first responders, but not limited for all those who have to stay in the service or be in contact with many other people in the time of COVID-19 pandemic.

기술지주회사 연구동향과 기업성과 향상을 위한 제언 : Project Management Office(PMO) 도입을 중심으로 (Research Trends of Technology Holding Companies and Suggestions for improving Corporate Performance : Focusing on the introduction of PMO)

  • 이강오;이찬호
    • Journal of East Asia Management
    • /
    • 제4권1호
    • /
    • pp.53-77
    • /
    • 2023
  • Modern company faces an uncertain future and a competitive environment and are seeking new technologies and creative products to ensure the corporate growth and survival in the market through continuous innovation. "University Industry Cooperation(UIC)" is a point of contact for overcoming the crisis faced by companies and universities in this era and a cooperation platform for mutual prosperity. As a subsidiary of a university, "Technology Holding Company(THC)" is attracting attention as a new window for UIC in Korea. The role of THC is to establish and foster the business opportunities of their subsidiaries and to return investment profits to the university ecosystem again. But recently, the life cycle of technology is getting shorter, and the development cost is steadily increasing. In particular, with the increase of hybrid projects based on convergence and combination, the risk of conducting research(R&D) and new product development(NPD) projects is gradually increasing. A PMO refers to a project management organization that can contribute to improving the success rate of projects with increasing uncertainty by supporting project visibility and appropriate decision-making. The purpose of this study is to raise a research question on whether THC's corporate performance can be improved when "Project Management System(PMO Service)" is introduced into the subsidiary incubation system of THC. This study proposes several research methods to identify the relationship between the introduction of PMO and the corporate performance of THC.

노인 장기요양기관에 종사하는 사회복지사의 임종 케어 경험과 역할에 관한 질적 연구 (Qualitative Study on Social Workers' Experiences and Roles during End-of-Life Care in Elderly Long-Term Care Facilities)

  • 김은경
    • 한국콘텐츠학회논문지
    • /
    • 제22권5호
    • /
    • pp.503-517
    • /
    • 2022
  • 본 연구는 노인 장기요양 서비스를 제공하는 기관에서 종사하는 사회복지사들이 임종 케어 과정에서 겪는 심리·사회적 경험 및 역할에 대해 알아보았다. 심층 면접을 통한 자료 분석 결과 사회복지사들은 임종 케어 과정에서 빈번한 죽음 경험으로 인해 기가 빠지고 소진됨을 경험하였으며 돌아가신 노인분들에게 더 잘해드리지 못한 것에 대해 아쉬움과 정든 분에 대한 그리움을 나타냈다. 그리고 갑작스러운 죽음이 발생하면 가족들의 비난과 불평을 겪기도 하였다. 임종 케어시 사회복지사들의 주된 역할로 죽음 징후가 나타나면 가족들에게 수시로 연락하여 소통하였고 임종 후 주 부양자 가족들을 위로하고 지지하였다. 응급상황 대처를 위한 사전준비와 응급조치에 대한 법적 안전망, 사회복지사들의 소진을 막기 위한 재충전 프로그램 및 지지 모임, 임종 케어를 위한 표준화된 매뉴얼과 교육의 필요성이 제시되었다. 또한 노인분의 존엄한 죽음을 위하여 죽음 준비교육, 호스피스 케어, 사전 의료의향서 등의 필요성도 강조되었다.

Strain energy release rates in the curved spar wingskin joints with pre-embedded delaminations

  • P.K. Mishra;A.K. Pradhan;M.K. Pandit ;S.K. Panda
    • Structural Engineering and Mechanics
    • /
    • 제87권1호
    • /
    • pp.47-56
    • /
    • 2023
  • Any pre-existed delamination defect present during manufacturing or induce during service loading conditions in the wingskin adherend invariably shows a greater loss of structural integrity of the spar wingskin joint (SWJ). In the present study, inter-laminar delamination propagation at the critical location of the SWJ has been carried out using contact and multi-point constraint finite elements available with commercial FE software (ANSYS APDL). Strain energy release rates (SERR) based on virtual crack closure technique have been computed for evaluation of the opening (Mode-I), sliding (Mode-II) and cross sliding (Mode-III) modes of delamination by sequential release of multi point constraint elements. The variations of different modes of SERR are observed to be significant by considering varied delamination lengths, material properties of adherends and radius of curvature of the SWJ panel. The SERR rates are seen to be much different at the two pre-embedded delamination ends. This shows dissimilar delamination propagation rates. The maximum is seen to occur in the delamination front in the unstiffened region of the wingskin. The curvature geometry and material anisotropy of SWJ adherends significantly influences the SERR values. Increase in the SERR values are observed with decrease in the radius of curvature of wingskin panel, keeping its width unchanged. SWJs made with flat FRP composite adherends have superior resistance to delamination damage propagation than curved composite laminated SWJ panels. SWJ made with Boron/Epoxy (B/E) material shows greater resistance to the delamination propagation.

차량이 포함된 이미지를 고려한 사장재 케이블의 장력 측정 (Tension Measurement of Stay Cables in Consideration with Image Including Vehicle )

  • 김성완;박동욱;김진수;박승수;박재봉
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제27권2호
    • /
    • pp.58-66
    • /
    • 2023
  • 이 연구에서는 진동법을 이용하여 케이블 장력을 추정하고 비접촉 방식으로 케이블의 변위 응답을 측정하기 위한 센서로 영상기반시스템을 적용하였다. 영상기반시스템에서 카메라는 대상 구조물과 카메라의 시야를 고려한 위치에 설치된다. 그러나 설치하려는 위치의 이미지에는 대상 구조물과 차량 등의 다른 구조물이 포함될 수 있어 구조물의 변위 응답 측정에 필요한 기준점을 인식하기 어려울 수 있다. 영상기반시스템의 설치 위치로 인해 차량이 포함된 왜곡된 이미지는 이미지 해석에서 부정확한 결과를 나타내므로 두 이미지 사이의 유사성을 산정하여 차량이 포함된 이미지를 제거하였다. 제안된 방법을 이용한 사장교 케이블의 장력을 측정하는 방법의 타당성을 확인하기 위해 공용 중인 사장교에서 진동법을 적용하여 장력을 측정하였다.

석회암 분포지에서 터널시공에 따른 지표침하 원인 분석 (Ground Subsidence Caused by the Development of Underground Karstic Networks in Limestone Terrain, Taebag City Korea)

  • 이병주;박성욱;김대홍;송영갑
    • 지질공학
    • /
    • 제26권1호
    • /
    • pp.63-70
    • /
    • 2016
  • 연구지역은 고생대 지층인 석회암류과 석회암층 사이에 셰일층이 협재하고 이 석회암 상부에 사암 및 탄질셰일층이 분포 한다. 이 퇴적암들의 층리는 서북서 방향의 주향에 북동방향으로 경사지고 있으며 절리들은 경사각이 75도 이상이고 주향은 여러 방향으로 발달한다. 이 지역에는 층리방향과 거의 평행한 파쇄대들은 대규모로 발달하며 이들 파쇄대는 지하 깊이까지 연장되고 있다. 급격한 지하수위의 변화는 5월에 일차 그리고 6월초와 6월 중순에 2차 약 1달 사이 총 3차례의 -4 m에서 시작하여 최대 -15 m까지 하강과 회복을 반복하였으며 이는 지표의 강수량과는 무관함이 확인되었다. 이에 따라 지표침하의 원인은 석회암 내 풍화대와 연결된 터널 심도까지 발달하는 파쇄대와 석회암과 셰일, 석회암과 사암 및 탄질셰일과의 경계부에 발달하는 파쇄대들에서 터널 시공 시 하루에 1000톤 이상의 지하수가 용출되며 지하수위의 급격한 강하와 이에 따라 지하수의 급격한 하강 시 지반에 흡입력을 증가하면서 지표에 침하가 일어난 것으로 해석된다.

한국 민간경호원 교육프로그램 방향에 관한 연구 (A Study on Modeling Instruction And Training Program for Korean Private Security Guard)

  • 이상철;신상민
    • 시큐리티연구
    • /
    • 제9호
    • /
    • pp.201-235
    • /
    • 2005
  • 본 연구는 민간경호업무에 종사하고 있는 민간경호원과 국내${\cdot}$외 경호업체 및 기관의 교육훈련 실태를 파악하고, 이에 도출된 문제점을 토대로 교육훈련의 성과를 높일 수 있는 교육훈련 프로그램 모델을 설정함으로써 합리적이고 효율적인 교육훈련 프로그램체제를 구축하는데 방향을 제시하고자 한다. 본 연구를 위해 기본적으로는 국내외에서 발간된 문헌과 학술지 및 연구논문 등과 같은 문헌자료의 수집${\cdot}$분석을 하였고, 실증적인 자료 활용을 위해서 인터넷과 국내${\cdot}$외 관련협회, 학회, 기관, 경찰청 및 인터폴의 협조를 통해 자료를 수집 하였으며, 국내 민간경호업체의 교육훈련 프로그램은 민간경호업체 실무자 인터뷰 기법을 활용하여 연구하였다. 국내 민간경호업체에서는 교육훈련 프로그램 계획시 이론교육을 최소화하고 실무 중심적 교육으로 교육훈련 프로그램을 설정해야 하고, 이론교육 또한 실무 교육과 연계된 교육 내용으로 구성되어야 할 것이다. 민간경호원 교육훈련 프로그램의 교육과목은 이론 교육으로는 경호, 개론, 경호 계획, 정보 수집, 민간경비, 경호 방법, 테러 및 테러리즘, 관련 법령, 경호 심리, 전자 보안, 경호 분석 기법, 기업 소개, 직업관에 관한 교육훈련 프로그램으로 구성되어야 한다. 실무 교육으로는 선발 및 예방 경호, 근접수행 경호, 차량 경호, 경호 운전, 경호무도 및 호신술, 응급 처치, 경호 장비, 총기류 및 사격, 경호 의전, 고객 만족, 시설보안 및 경비, 소방 교육, 팀워크 훈련, 폭발물 및 위험물, 체력 단련, 문서 작성 실무, 봉사 활동, 외국어 교육에 관한 교육훈련 프로그램으로 구성되어야 한다.

  • PDF

디지털 제품 관련 소비자 스트레스에 관한 연구 (Digital Stress of Consumers in Using Digital Goods)

  • 김정은;여정성
    • 가정과삶의질연구
    • /
    • 제25권3호
    • /
    • pp.119-135
    • /
    • 2007
  • The purpose of this study is to find out the level of digital stress that people experience and to investigate the effects of socio-economic variables on that. To collect data, structured questionnaire was developed and 1,200 questionnaires were distributed through internet. There were 2 dimensions in this study to examine digital stress. First dimension was about the devices themselves: computers and the other digital goods. Second dimension was about the time digital stress occurring in consumers' decision-making process: purchasing and using. Based on Yeo&Kim(2004), sub-dimensions of purchasing and using aspects were chosen. 5 sub-dimensions in purchasing side were new technology, cost, variety of alternatives, warranty service, and informational problem 6 sub-dimensions in using field were mal(or impaired)-functioning. physical aspects, immaturity in use, pressure to use, addiction to use, and informational problem. As independent variables, sex, age, educational level, digitalization acceptability and computer usability were used. The overall level of digital stress was around the average point which was not as high as expected. Digital stress of purchasing was higher than that of using. First, in purchasing aspects, the level of digital stress was relatively high in cost, variety of alternatives and warranty service. Hence, clear communications with consumers about the distinctive aspects and cost of digital devices in market are needed. Secondly, in using side, mal-functioning and physical aspects were relatively more powerful stressors. In the other words, the more serious problems were not from the characteristics of individual consumers but from those of products. Producers should put their best efforts to reduce imperfection (defectiveness) and develop user-friendly digital devices. Also, users' individual efforts to overcome the problems that can be solved privately are necessary. Finally, it was discovered that sex and computer usability were very important variables on digital stress. To extend computer usability of consumers and get over digital illiteracy, it is essential to expand the paths to give chances for people to contact with computers and other digital goods. Still there are lots of people whore computer-illiterate or low-skilled at computers. In policies or educational programs made by government, communities, or schools, more attention should be paid to the digitally vulnerable groups.

IoT를 이용한 지하매설물관리용 지능형표지기(IMI) 기술개발에 관한 연구 (A Study on the Development of Intelligent Markup Indicator (IMI) Technology for Underground Facilities Management Using IoT)

  • 김태달
    • 한국인터넷방송통신학회논문지
    • /
    • 제17권3호
    • /
    • pp.129-136
    • /
    • 2017
  • 과거 지리정보시스템 GIS(Geographic Information System)의 활용영역이 정부와 몇몇 공공분야에 국한돼 있었으나, 최근 모바일, CRM(Customer Relationship Management) 등 다른 영역과 결합하면서 시장이 다양해지고 있다. 21세기 GIS기술의 발전방향은 GIS응용시스템 개발 및 공간정보 서비스를 위한 제반 기술로서 웹 GIS, 3차원 GIS, 모바일 GIS, LBS 등을 들 수 있다. 본 연구에서는 기존에 사용하고 있는 지하매설물 관련 표지못의 단순 위치파악 기능에서 탈피해서 새로운 개념의 표지못(지능형 저장 메모리장치를 내장한 표지못)을 개발해서, 현장에서 지하매설물관련 정보 (설치일자, 매설 깊이, 배관 두께, 배관 재질, 관리기관, 시공자, 연락처 등)를 입력하고 DB서버에 저장해서, 필요하면 적시. 적소에서 활용할 수 있게 한다. 본 연구를 통해 무분별한 굴착기 공사 등으로 야기되는 각종 사고를 미리 방지하고, 최소화 할 수 있으며, 싱크홀 관련 대책 수립을 위한 정보제공 등. 지하매설물관리를 체계적이며, 신뢰성 있는 정보 제공이 가능하도록, 현장에서 편리하게 정보를 입력할 방안을 제시함으로써, 지하 매설관로 사고를 절대적으로 감소시킬 수 있도록 하는 목적을 두고 연구 개발하였다.