• Composites Research
• /
• v.16 no.2
• /
• pp.41-47
• /
• 2003

This paper is concerned with the performance evaluation and comparison analysis fur several kinds of LIPCA (Lightweight Piezo-Composite Actuator) device system. LIPCA device system is composed of a piezoelectric ceramic layer and fiber reinforced light composite layers, typically a PZT ceramic layer was sandwiched by a top fiber layer with low CTE (coefficient of thermal expansion) and base layers with high CTE. To investigate the effect of lay-up structure of the LIPCA on the actuating performance, four kinds of actuator with different lay-up stacking sequence were designed, manufactured, and tested. The performance of each actuator was evaluated using an actuator test system consisted of an actuator supporting jig, a high voltage actuating power supplier, and a non-contact laser measuring system. From the comparison of the performance of the LIPCA prototypes, it was found that the actuator with higher coefficient of unimorph actuator can generate larger actuating displacement.

• Composites Research
• /
• v.13 no.6
• /
• pp.39-46
• /
• 2000

Electrical discharge machining (EDM) cuts metal by discharging electric current across a thin gap between tool and workpiece. Electrical discharge wire cutting, a special form of EDM, uses a continuously moving conductive wire as an electrode, and is widely used for the manufacture of punches, dies and stripper plates. In the wire cutting process, the moving wire is usually supported by cantilever arm and wire guides. As the wire traveling speed has been increased in recent years to improve productivity, the vibration of the cantilever arm occurs, which reduces the positional accuracy of the machine. Therefore, the design and manufacture of the cantilever arm with high dynamic characteristics have become important as the machining speed increases. In this paper, the cantilever arm for guiding the moving wire was designed and manufactured using carbon fiber epoxy composite in order to improve the static and dynamic characteristics. Specimens for the composite cantilever arm were manufactured and tested to investigate the effect of the number of reinforcing plies and length fitted to steel flange on the load capacity. Also, the finite element analysis using layer and contact elements was performed to compare the calculated results with the experimental ones. From the results, the prototype of the composite cantilever arm for the electrical discharge wire cutting machine was manufactured and the static and dynamic characteristics were compared with those of the conventional steel cantilever arm.

• Composites Research
• /
• v.23 no.1
• /
• pp.44-50
• /
• 2010

In this paper, two different experiments, namely, salt water spray and salt water immersion, were performed to reproduce the contact of composites with the seawater for three kinds of woven fabric composite material systems which would be used for the WIG(wing in ground effect)craft. After aging 140 days in the salt water environment, material properties of carbon/epoxy and glass/epoxy composite such as tensile, compressive and shear stiffness and strength, and inter-laminar shear strength (ILSS) were measured. By comparing baseline material properties with degraded ones, the effects of the salt water environment on the composite mechanical properties were evaluated. From the experiments, it was confirmed that the difference in aging conditions had very small influence on composite properties. And it was found that tensile strength of carbon/epoxy composites showed little degradation, but much more degradation was observed in glass/epoxy composites. And large degradations on matrix dominant properties were observed. The salt water could damage the fiber-matrix interface, matrix properties and the glass fiber.

• Women's Health Nursing
• /
• v.3 no.2
• /
• pp.180-191
• /
• 1997

When women are removed with their matrix which is a emotionally significant organ of symbol in psychologically adapting themselves to mother and woman, that is threatened and injured with woman role decisively. The nursing for women with hysterectomy is limited to medical treatment and the nursing related to troubles in psychology, emotion they experience in general situation due to operations is hardly realized. New basis for nursing can be realized when we both have relation with lived human experience related th health and become to be a part of it. We need to catch their experience due to the loss of matrix to understand women with hysterectomy. The subjects of the study were nine patients who were admitted to a gynecological ward of a hospital in Seoul, suffering from vaginal bleeding, back pain, abdominal pain and so on and diagnosing as non-cancer. The data were collected from April to May 1997 by listening to the subjects' expression of their experience and by participant observation of the subjects' reactions. A tape-recorder was used under the permission of the subjects, to prevent the loss of spoken information. The result of the study was as follows : The data on burden content from the interview were categorized as psych-emotional, physical, personal interaction, financial burden and maternal role burden. The factors which have influence on the burden of the subjects are an offer of information, support system, age, occupation, economic situation, family history, character, season, the existence of ovary and religion. In conclusion, since we ascertained that the nursing in the process of recovery decide the quality of life, though women with hysterectomy undergo various burden experience and adapt to it in the end, it is necessary to give them enough information and educate husband, having on important effect on the burden experience, to be a good supporter. And technically skilled nurses of consultant are thought to be able to contrive better qualitative life of women with hysterectomy as an important bridge between the subjects and their required information, since the nurses have their well-formed position of relationship of confidence through continuous contact with patients and their family.

• The Journal of Korean Medicine
• /
• v.18 no.2
• /
• pp.43-57
• /
• 1997

It was claimed that the herbal medicine with the function of strengthening the body resistance exerts to enhance the immunity. And the medicine with the effect of eliminating the pathogenic factor is stated to inhibit the immune response. To evaluate the the effects of the herbal medicine on the immune response, the mice were administrated with the herbal medicine for 2 weeks. And the responses were analyzed. As the result, water extract of Radix Astragali, Fructus Psoraleae, Cortex Acanthopanacis, Semen Coicis, Herba Ecliptae, Spica Prunellae, and Radix Sophorae increased the ROI production, while Radix Tripterygia inhibited it. Phagocytic activity was increased after administration of Radix Astragal, Fructus Psoraleae, Cortex Acanthopanacis, Herba Ecliptae, Spica Prunellae and Radix Sophorae. NK cell activity was also significantly inhibited by Radix Tripterygia. Administration of Radix Astragali, Fructus Psoraleae, Cortex Acanthopanacis, Herba Ecliptae, Spica Prunellae and Semen Coicis enhanced the antibodies(hemagglutinin and hemolysin) formation and the appearance of rosette forming cells of the spleen, while Radix Sophorae and Radix Tripterygia decreased it. Radix Sophorae and Radix Tripterygia also decreased the allogenic immune response and mixed-lymphocyte reaction. And all the experimental herbs decreased contact hypersensitivity against dinitroflurobenzene. These results show Radix Astragali, Fructus Psoraleae, Spica Prunellae, Cortex Acanthopanacis, Semen Coicis and Herba Ecliptae enhanced innate immunity, humoral and cellular immune responses. However Radix Sophorae and Radix Tripterygia exert imunosuppressive action. Also these results indicate that the medicine with the action of the strengthening the body resistance enhances the immunity. And the the some of drugs belonging to the eliminating the pathogenic factor also increase the immune responses.

• The Journal of Information Systems
• /
• v.26 no.3
• /
• pp.119-147
• /
• 2017

Purpose In an online e-commerce environment without face-to-face contact between the seller and the buyer, the attitudes of consumers differ greatly depending on which framing strategy is applied, even in cases when the benefits of the deals represent the same value. The purpose of this study is to explore the effects of price-framing and message-framing strategies on consumer attitudes through an experimental analysis in the context of online travel product purchasing. This study suggests a research model based on prospect theory and prior literature on price-framing and message-framing strategies. Design/methodology/approach The experiment was structured as a 2 (discount price presentation: 'Won' vs. '%') ${\times}$ 2 (discount level: low vs. high) ${\times}$ 2 (time-limit message: none vs. one) mixed design. The research hypotheses were tested in a study of 200 undergraduate and graduate students assigned randomly and distributed evenly to each of the eight cells. Findings The findings indicate that consumer attitudes become more favorable when the '%' discount, higher discount rate, and time-limit message are presented. However, no significant interaction effect is found between the discount price presentation and the discount level/time-limit message. This study has a theoretical implication in that it extends the scope of research by examining the influence of framing strategies on experience goods such as online travel products. Moreover, this study can provide managers with more specific guidelines when establishing framing strategies in the context of purchasing online travel products.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.191-196
• /
• 2000

Purpose This study is to report presurgical magnetic resonance imaging(MRI) findings of the temporomandibular joint which had perforation in the disc or its surrounding tissues and to improve its diagnostic rate using MRI. Patients and Methods The sample consisted of patients who visited the TMJ clinic at Yongdong Severance Hospital, Yonsei University, during the years, 1992 and 1997. They were diagnosed as TMJ internal derangement and received surgical treatment. We divided them into two groups. The first group comprised of 85 joints with perforated disc or its surrounding tissues and which were confirmed surgically. The second group of 62 joints which only had disc displacement without perforation, hyperemia or adhesion served as control. Results The preoperative diagnostic sensitivity of TMJ perforation using MRI was 74.1%. The MRI findings for diagnosis of the TMJ perforation were degenerative change of the condyle head or the articular fossa, bone to bone contact between the condyle head and the articular eminence or the articular fossa, bony spurring or osteophytosis of the condyle head, flattening of articular surface of the condyle head or the articular eminence, discontinuity of the disc and the arthrographic effect due to joint effusion. Conclusion The preoperative diagnostic sensitivity of TMJ perforation using MRI in this study was 74.1% which was lower than the diagnostic rate using the arthrogram. Further investigations are needed to improve the diagnostic accuracy of TMJ perforation using MRI.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.51-61
• /
• 1993

A systematic approach of the energy method is proposed for analysis of axisymmetric deep drawing in which the total deforming region is divided into five sections by the geometric characteristic. The corresponding solution is found through optimization of the total energy dissipation with respect to some parameters assumed in the kinematically admissible velocity field defined over each region. The sheet blank is divided into three-or five-layers to consider the bending effect. For the evaluation of frictional energy, it is assumed that the blank holding force acts on the outer rim of the flange and that the contact pressure acting on punch shoulder or die shoulder has uniform distributions, respectively. The computed results by the present method are compared with the experiment and the computed results by the elastic-plastic finite element method for the distribution of thickness strain and the relation between the punch stroke and punch load. The results for the case of multi-layers show better agreements than for the case of a single layer in load vs. stroke relation and strain distribution. It is thus shown that the multi-layer technique can be effectively employed in analyzing axisymmetric deep drawing in connection with the energy method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.88-99
• /
• 1996

The explicit scheme for finite element analysis of sheet metal forming problems has been widely used for providing practical solutions since it improves the convergency problem, memory size and computational time especially for the case of complicated geometry and large element number. The explicit schemes in general use are based on the elastic-plastic modeling of material requiring large computataion time. In the present work, a basic formulation for rigid-plastic explicit finite element analysis of plain strain sheet metal forming problems has been proposed. The effect of some basic parameters involved in the dynamic analysis has been studied in detail. Thus, the effective ranges of parameters have been proposed for numerical simultion by the rigid-plastic explicit finite element method. A direct trial-and-error method is introduced to treat contact and friction. In computation, sheet material is assumed to possess normal anisotropy and rigid-plastic workhardening characteristics. In order to show the validity and effectiveness of the proposed explicit scheme, computations are carried out for cylindrical punch stretching and the computational results are compared with those by the implicit scheme as well as with a commercial code. The proposed rigid-plastic exlicit finite element method can be used as a robust and efficient computational method for analysis of sheet metal forming.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.188.1-188.1
• /
• 2014

Aluminum is widely used as a material for electrode on silicon based devices. Especially, aluminum films are used as backside and front-side electrodes in silicon quantum dot (QD) solar cells. In this point, the diffusion of aluminum is very important for the enhancement of power conversion efficiency by improvement of contact property. Aluminum was deposited on a Si (100) wafer and a Si QD layer by ion beam sputter system with a DC ion gun. The Si QD layer was fabricated by $1100^{\circ}C$ annealing of the $SiO_2/SiO_1$ multilayer film grown by ion beam sputtering deposition. Cs ion beam with a low energy and a grazing incidence angle was used in SIMS depth profiling analysis to obtain high depth resolution. Diffusion behavior of aluminum in the Al/Si and Al/Si QD interfaces was investigated by secondary ion mass spectrometry (SIMS) as a function of heat treatment temperature. It was found that aluminum is diffused into Si substrate at $450^{\circ}C$. In this presentation, the effect of heat treatment temperature and Si nitride diffusion barrier on the diffusion of Al will be discussed.