• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6A
• /
• pp.843-851
• /
• 2008

The conventional pile cap reinforcement systems regulated in the design specifications have some restrictions in design and construction such as requirement of shear key, disposition of reinforcing bars and insurance of anchoring length of reinforcements. This study suggests a new type of steel pipe pile cap system with perforated flat bar shear connector as an alternative to the conventional pile cap system for the improvement in structural performance and simplification of construction. And, experimental results of push-out and bending behavior are scribed for the evaluation of structural performance of the new pile cap system and it was compared to the structural behavior of conventional pile cap system.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.154-159
• /
• 2008

Daylight is an important component for human and energy saving. Also, available daylight in inside provides positive influence on psychological and physiological aspects as well as good visual environment. It is important to lighting design for office building not only designing for artificial lighting but also using daylight for energy savings. Therefore, lighting designers and architectures must consider the effects of the daylight for human environment and energy savings. The BIN Method is one of the methods to predict energy savings using computer simulation but it spends more time than expectation. So, this study performs to simulate a simple space using the RADIANCE for examination and simplification of the BIN Method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.406-409
• /
• 2006

Serviceability resign is required to control the cracking at the joint of precast decks having longitudinal prestress in continuous composite bridges. Especially, details of twin girder bridges are complex not only due to main reinforcements and transverse prestress for the resign of long-span concrete slabs but also due to shear pockets for obtaining the composite action. This paper suggests the design guidelines for the magnitude of the effective prestress and for the selection of filling materials and their requirements in order to use precast decks for twin-girder continuous composite bridges. The necessary initial prestress was also evaluated through the long-term behavior analysis. From the analysis, existing design examples were revised and their effectiveness was estimated. When a filling material having bonding strength higher than the requirement is used in the region of high negative moment, uniform configuration of longitudinal prestressing steels along the whole span length of continuous composite bridges can be achieved resulting in simplification of details and enhancement of the construction costs.

• Composites Research
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2014

Theories for composite material structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. The author has reported that some laminate orientations have decreasing values of $D_{16}$, $B_{16}$, $D_{26}$ and $B_{26}$ stiffnesses as the ply number increases. For such plates, the fiber orientations given above behave as specially orthotropic plates and simple formulas developed by the author. Most of the bridge deck structures on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms $M_x$ on the relevant partial differential equations of equilibrium. In this paper, the result of the study on the subject problem is presented.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.31
• /
• pp.137-153
• /
• 2006

The thesis examines the problems for innovation of export and import conditions and shows the various ways of overcoming them. The alternatives of export and import conditions are as follows. First, the government body including customs service should participate on positive lines for the construction of single window and standardization of the required documents. Second, it is required the development of efficient connection system among exporter and importer, customs service, requirement confirmation agency etc. to contribute the simplification of a operation. Therefore this research is intended to improve understanding of changes for innovation and to contribute in support basis, operation structure, legal and institutional side. Practical implications regarding the innovation of export and import conditions for electronic trade are discussed.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.5 no.4
• /
• pp.18-23
• /
• 2014

In this paper. the effects of the aspect ratio on the natural frequency of the advanced composite road structures is studied. The advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. Some laminate orientations have decreasing values of $D_{16}$, $B_{16}$, $D_{26}$ and $B_{26}$ stiffnesses as the ply number increases. The plate aspect ratio considered is from 1 to 5. Most of the road structures have large aspect ratios, for such cases further simplification is possible by neglecting the effect of the longitudinal moment terms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.6
• /
• pp.475-484
• /
• 1990

This paper proposes a method for the implementation of a power line communication equipment using power line synchronization in a direct-sequence spread spectrum communication system. In order to implement a network using a power line as a transmission channel we have investigated the utilization of direct-sequence speread spctrum which gives such advantages as robustness against narrow-band interference and noise, and realization of multiple access. In a power line, however, complexity of synchronization makes it difficult to realize a multiple access and cost down and system simplification. The proposed technique of power line synchronization makes it possible to get cost down and system size small, and the realization of multiple communication can be achieved by the addition of address setting circuit.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.77-83
• /
• 1998

The most of the design engineers for construction has academic background of bachelors degree. Theories for advanced composite structures are too difficult for such engineers and some simple but accurate enough methods are necessary. The senior author has reported that some laminate orientations have decreasing values of B$_{16}$, B$_{26}$, D$_{26}$, and D$_{26}$ stiffnesses as the ply number increases. Such plates above behave as special orthotropic plates and simple formulas developed by the senior author［1, 3］ can be used. Most of the bridge and building slabs on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms(M$_{x}$) on the relevant partial differential equations of equilibrium. In this paper, the result of the study on the subject problem is presented.ted.d.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.223-230
• /
• 1998

The most of the design engineers for construction has academic background of bachelors degree. Theories for advanced composite structures are too difficult for such engineers and some simple but accurate enough methods are necessary. The senior author has reported that some laminate orientations have decreasing values of D$_{16}$, B$_{16}$, D$_{26}$ and B$_{26}$ stiffnesses as the ply number increases. Such plates behave as special orthotropic plates and simple formulas developed by the author can be used. Most of the bridge and building slabs on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms(M$_{x}$) on the relevant partial differential equations of equilibrium. In this paper, the result of the study on the subject problem is presented.ented.d.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.437-444
• /
• 2008

최근 유비쿼터스 시대를 맞아 건설 분야에서 이용되는 CAD 자료에서 GIS 자료로의 변환 및 융복합에 대한 요구가 증대되면서 상호변환을 위한 연구가 활발하게 진행되고 있다. 본 연구에서는 건설도면 CAD 데이터를 활용하여 수치지도의 건물데이터를 수정, 갱신하기 위한 방법론의 일환으로 건설도면의 건물외곽선을 추출하여 수치지도의 건물데이터 수준으로 일반화하는 선형 단순화 알고리즘을 비교 분석하였다. 선형 단순화 알고리즘은 Douglas-Peucker 알고리즘, Lang 알고리즘, Reumann-Witkam, Opheim 알고리즘을 적용하였으며 분석방법으로는 시각적 분석, 절점 수, 총길이, 면적 변화율 분석 그리고 각 절점이 수치지도 작성내규를 만족하는 비율을 이용하였다. 분석 결과 Douglas-Peycker 알고리즘이 시각적 측면과 절점 수 감소율 측면에서 상대적으로 우수한 단순화 결과를 보여주었으나 수치지도 작성내규 만족도 측면에서는 공통적으로 $50{\sim}60%$ 수준의 만족도를 보이고 있어 국내의 수치지도의 건물데이터를 작성하기 위한 단순화 기법으로는 한계가 있는 것으로 나타났으며 이를 만족시키기 위한 일반화 알고리즘의 개발이 필요하다고 판단된다.