• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.83-86
• /
• 2005

This paper proposed a hydraulic pump system which uses a variable SR drive and constant capacity pump. The base and maximum speed, torque are determined from displacement capacity of the pump and maximum pressure. The drive system is set to have a minimum power consumption having hydraulic preset pressure, which is operated within a maximum capacity and maximum preset pressure. This is achieved by controlling motor speed and power with feedback signal of pressure of the hydraulic pump. A 2.2kw, 12/8-pole SR motor and DSP based digital controller are designed and prototype drive system is manufactured. The proposed variable speed SR drive system is simulated and tested with experimental set-up. The test results show that the system has some good features such as high efficiency and high response characteristics.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.513-521
• /
• 2006

The performances of porous bearings under different operating conditions were experimentally investigated in this study. Material groups studied are 90%Cu + 10%Sn bronze and 1%C + % balance Fe iron-based self-lubricating P/M bearings at constant (85%) density. In the experiments, the variation of the coefficient of friction and wear ratio of those two different group materials for different sliding speeds, loads, and temperatures were investigated. As a result, the variation of the friction coefficient-temperature for both constant load, and constant sliding speed, friction coefficient-average bearing pressure, PV-wear loss and temperature-wear loss curves were plotted and compared with each other for two materials, separately. The test results showed that Cu-based bearings have better friction and wear properties than Fe-based bearings.

• Geomechanics and Engineering
• /
• 제17권5호
• /
• pp.497-505
• /
• 2019

Biocementation based on the microbially induced calcite precipitation (MICP) process is a novel soil improvement method. Biocement can improve significantly the properties of soils by binding soil particles to increase the shear strength or filling in the pores to reduce the permeability of soil. In this paper, results of triaxial consolidated undrained (CU) tests and constant shear drained (CSD) tests on biocemented Ottawa sand are presented. In the CU tests, the biocemented sand had more dilative behaviour by showing a higher stress-strain curves and faster pore pressure reducing trends as compared with their untreated counterparts. In the CSD tests, the stress ratio q/p' at which biocemented sand became unstable was higher than that for untreated sands, implying that the biocementation will improve the stability of sand to water infiltration or liquefaction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1672-1677
• /
• 2003

Carbon dioxide($CO_2$, R-744) has become a very popular issue in application to refrigeration and air conditioning systems as a natural refrigerant. An experimental study has been carried out to investigate the vapor pressure and miscibility of refrigerant R-744 in the presence of lubricant oil. This is of particular interest in the selection of the lubricant oil for the compressor of a refrigeration system or an air conditioning system using the refrigerant R-744. This apparatus consists of the test section, measuring devices, the vacuum pump, the constant temperature bath and relevant connecting pipes made of stainless steel. Two lubricant oils, such as mineral oil(Naphthenic) and polyol ester(POE) oil, are considered in the present study. For this purpose, test runs were conducted with the oil concentration range from 5 to 50 wt%, and the temperature range from -10 to $10^{\circ}C$ with $2^{\circ}C$ intervals. The results are correlated with the vapor pressure. and showed with the miscibility as visualization for the individual text components.

• 설비공학논문집
• /
• 제16권2호
• /
• pp.150-157
• /
• 2004

Carbon dioxide ($CO_2$, R-744) has become a very popular issue in application to refrigeration and air conditioning systems as a natural refrigerant. An experimental study has been carried out to investigate miscibility and the vapor pressure of refrigerant R-744 in the presence of lubricant oil. This is of particular interest in the selection of the lubricant oil for the compressor of a refrigeration system or an air conditioning system using the refrigerant R-744. The experimental set-up consists of the equilibrium cell, measuring devices, the vacuum pump, the constant temperature bath and relevant connecting pipes made of stainless steel. Five lubricant oils, such as mineral oil (Naphthenic), AB (Alkyl Benzene) oil, PAO (Poly Alpha Olefin) oil, PAG (Poly Alkylene Glycol) oil and POE (Polyol Ester) oil are considered in the present study. Test runs were conducted with the oil concentration range from 5 to 50 wt％, and the temperature range from -10 to 1$0^{\circ}C$ with 2$^{\circ}C$ intervals. The miscibility results are visualized and correlated with the vapor pressure for the individual test components.

• 한국해양공학회지
• /
• 제22권5호
• /
• pp.106-111
• /
• 2008

In this paper, study about property evaluation for the metal matrix composites fabricated by low pressure infiltration process. Aluminum alloy composite which is reinforced by Metal fiber preform was fabricated by low pressure casting process. Infiltration condition was changed the pressure infiltration time of 1 sec, 2 sec and 5 sec under a constant pressure of 0.4 MPa. The molten alloy completely infiltrated the FeCrSi metal perform regardless of the increase in the pressure acceleration time. The the porosity in the FeCrSi/AC8A composite was investigated. The porosity was reduced as the pressure acceleration time as shorter. The FeCrSi/AC8A composite was investigated the wear test for to know the relationship between Porosity and wear resistance. FeCrSi/AC8A composite at pressure acceleration time of 1sec is shown excellent wear resistance.

• 터널과지하공간
• /
• 제31권4호
• /
• pp.243-269
• /
• 2021

2010년대 이후 고준위 방사성폐기물 심층처분, 지하 CO₂ 저장과 시추공 조사 기반 심지층 특성화를 대상으로 한 연구 및 실용화 프로젝트의 사회적 중요성이 점차 높아지고 있다. 이와 관련하여, 대심도 암반의 수리 특성에 대한 정량적이고 신뢰성있는 정보를 얻을 수 있는 현장 시험 기술의 필요성도 크게 증가하고 있다. 수년간의 연구 개발을 통해 자체 기술력으로 설계, 제작된 핵심 장치들을 기반으로 대심도 시추공 수리특성 조사 시스템(DHTS)을 독자적으로 구축하였다. 이 시스템을 사용하여 경주시 중생대 화강암과 퇴적암 지역에 위치한 심도 1 km 급 시추공 2개소에서 고정밀도 정압 주입시험을 성공적으로 수행하였다. 현장 시험에서 미세 유량 주입/조절 모듈을 사용하여 0.01 l/min 미만의 매우 낮은 유량 측정이 가능하였다. 본 논문에서는 DHTS의 주요 특성을 소개하고 대심도 저투수성 암반 환경 하에서 수행된 고정밀도 시험 결과에 대해 간단히 논의하였다.

• 지질공학
• /
• 제3권2호
• /
• pp.149-165
• /
• 1993

지하매질의 유동특성을 알기 위한 직접적인 방법은 아직도 현장수리시험에 의존하고 있다. 열극암반에서 유동모델의 개념정립을 위하여는 열극체계분포와 특히, 수리시험해석결과가 중요시되고 있다. 국내에서 수행되고 있는 수리시험은 조사공구간별에 따른 수리전도도를 방사상의 정상류로 가정하여 결과를 해석하고 있다. 또한 시험대상 매질을 균질한 대수층 또는 단순한 기하학적 형태의 매질로 간주하며 구간별 투수량계수는 시험구간을 가로지르는 각 열극의 투수량계수의 합과 같다고 가정한다. 국내 기존의 수리시험 및 해석방법으로는 수리학적 경계면의 영향(boundary effects)이나 유동로의 기하학적 형태(flow geometry)에 대한 자료를 얻기가 힘들며, 일정한 조사공 주변을 벗어나면 투수성열극의 연결성에 대한 정보를 구할 수 없다. 열극특성을 고려한 지하수유동 해석을 위하여 단일공 정압주입시험을 실시하였으며, 비정상류해석방법을 통하여 유동차원(flow dimension)에 대한 분석을 시도하였다. 시추시에는 단일패커시험을 일정구간별로 시행하였으며, 조사공의 시추후에는 이중패커에 의한 구간별 시험을 실시하였다. 비정상류해석으로 구한 수리전도도값은 정상류해석의 결과와 큰 차이(10배 이내)는 없었으나, 정압하에서 도출된 유동량변화곡선에서 유동차원분석이 가능하였다. 상부구간(<10m 깊이)의 단일 및 이중패커시험결과는 모두 정상류의 유동차원이 나타났으며, 이는 영향반경의 경계면이 open system임을 알 수 있다. 15m 깊이에서 도출된 유동량변화곡선은 1차원 유동상태에서 3차원(구상유동)으로 변화하였다. 하부구간(25m 깊이)의 시험결과는 closed system 특성이 관찰되었으며, 이는 조사구간에서 연결된 열극이 수리적으로 격리되어 있음을 알 수 있다. 현장수리시험으로부터 보다 많은 자료를 도출하기 위하여는 무엇보다도 수리시험장비의 보완이 필요하다. 특히 조사구간을 완벽하게 분리할 수 있는 패커장비와 미세한 유동량변화를 계측할 수 있는 유량계의 확보가 필수적이며, 조사구간의 압력변화를 자동기록할 수 있는 계측기기가 필요하였다.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2381-2389
• /
• 1993

In this paper the design and test results of a dynamic flow rate sensor was reported. This sensor comprises an 2-way cartridge valve as standard hydraulic component and a displacement sensor. Its working principle bases on the linear relationship between the flow rate and the piston displacement of 2-way cartridge valves under constant pressure drop. This principle is well known, however it is not easy to develop a flow rate sensor with the measurement range of 300 1/min, pressure loss of less than 8 bar at 300 1/min, maximum linearity error of less than $\pm$1% and the maximum rising time of 10 ms. This paper describes the design procedure of the flow rate sensor, the improvement procedure of static performance and test method and results of dynamic performance.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1439-1447
• /
• 1994

Test results of friction-factor for the flow of air in a narrow channel lined with various honeycomb geometries show that, generally, the friction-factor is nearly constant or slightly decreases as the Reynolds number(or Mach number) increases, a characteristic common to turbulent flow in pipes. However, in some test geometries this trend is remarkably different. The friction factor dramatically drops and then rises as the Mach number increases. This phenomenon can be characterized as a "friction-factor jump." Further investigations of the acoustic spectrum indicate that the "friction-factor jump" phenomenon is accompanied by an onset of a normal mode resonance excited coherent flow fluctuation structure, which occurs at Reynolds number of the order of $10^4$. New empirical friction-factor model for "friction-factor jump" cases is developed as a function of Mach number and local pressure.ach number and local pressure.