• 전기학회논문지
• /
• 제59권10호
• /
• pp.1718-1726
• /
• 2010

Utilization of renewable energy is becoming increaingly important from the viewpoints of environmental protection and conservation of fossil fuel. However, the generating power of renewable energy is always fluctuating due to the environmental status. This paper presents a scheme for supervisory control of wind generation system with the energy storage and STATCOM to reduce the power variation. In this paper, we especially concentrate on constant power output control of wind generation system. In order to achieve this purpose, the coordinated control strategy between different types of energy storage system and reactive power compensation device. The proposed control scheme has been validated by PSCAD/EMTDC simulation. As a result, the proposed scheme can handle the power output of wind generation system with a constant value.

• 한국통신학회논문지
• /
• 제30권3C호
• /
• pp.141-146
• /
• 2005

The authors investigate the convergence speed problem of nonlinear adaptive equalization. Convergence constraints and time constant of radial basis function network using stochastic gradient (RBF-SG) algorithm is analyzed and a method of making time constant independent of hidden-node output power by using sample-by-sample node output power estimation is derived. The method for estimating the node power is to use a single-pole low-pass filter. It is shown by simulation that the proposed algorithm gives faster convergence and lower minimum MSE than the RBF-SG algorithm.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.216-226
• /
• 2015

The neutral beam injection generate ultra-high temperature energy in the tokamak of nuclear fusion. The neutral beam injection make up arc power supply, filament power supply and acceleration & deceleration power supply. The arc power supply has characteristics of low voltage and high current. Arc power supply generate arc through constant output of voltage and current. So this paper proposed suitable buck converter for low voltage and high current. The proposed buck converter used parallel switch because it can be increased capacity and decrease conduction loss. When an arc generated, the neutral beam injection chamber occur high voltage. And it will break output capacitor of buck converter. Therefore the output capacitor was removed in the proposed converter. Thus the proposed converter should be designed for the characteristics of low voltage and high current. Also, the arc power supply should be guaranteed for system stability. The proposed parallel buck converter enables the system stability of the divided low output voltage and high current. The proposed converter with constant output be the most important design of the output inductor. In this paper, designed arc power supply verified operation of system and stability through simulation and prototype. After it is applied to the 288[kW] arc power supply for neutral beam injection.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1515-1522
• /
• 2011

This paper proposes the algorithm for the output AC voltage control of Z-source inverter by the detection of the input DC voltage and Z-network capacitor voltage. The actual modulation index of the proposed method is detected by the capacitor voltage in Z-network and input DC voltage of three-phase Z-source inverter. Control modulation index for the output voltage control is calculated by the detected actual modulation index and reference modulation index. And, calculated control modulation index is applied to the modified space vector modulation (SVM) for control the output voltage of Z-source inverter. To verify the validity of the proposed method, PSIM simulation was achieved and a DSP controlled 1[kW] three-phase Z-source inverter was producted. The simulation and experiment were performed under the condition that the load was changed in case of the constant input DC voltage and the input DC voltage was changed in case of the load was constant. As a result, we could know that the output phase voltage of Z-source inverter followed to the reference voltage 70[VRMS] despite the load or the input DC voltage were suddenly changed.

• 한국정보전자통신기술학회논문지
• /
• 제14권1호
• /
• pp.37-42
• /
• 2021

본 논문은 루프필터 전압 감지기와 주파수 전압 변환기를 이용하여 잡음 특성을 개선한 위상고정루프의 구조를 제안한다. 루프 필터 전압 변화는 저항과 커패시턴스로 구성된 회로에 의해서 출력이 결정된다. 시정수 값이 작은 회로를 지나는 신호는 루프 필터의 평균 출력 전압과 거의 같은 값을 가진다. 시정수 값이 큰 회로를 지나는 신호는 루프 필터 평균 출력 값을 가지며, 추가된 루프필터 전압 감지기에서 기준 신호가 된다. 루프필터 전압 감지기 출력은 보조 전하펌프의 전류 크기를 제어한다. 루프 필터 출력 전압이 상승하면 루프필터 전압 감지기는 루프 필터 출력 전압을 하강하게 하고, 또는 루프 필터 출력 전압이 하강하면 루프필터 전압 감지기는 루프 필터 출력 전압을 상승하게 한다. 또한 주파수 전압 변환기도 필터 출력 전압 변동 폭을 줄여주어 제안된 위상고정루프의 잡음 특성을 개선해준다. 제안된 위상고정루프는 1.8V 0.18㎛ CMOS 공정을 이용하여 설계한다. 시뮬레이션 결과는 0.854ps 지터와 30㎲ 위상 고정 시간을 보여준다.

• 한국인터넷방송통신학회논문지
• /
• 제13권3호
• /
• pp.55-61
• /
• 2013

본 논문에서는 통신 채널에서 발생되는 찌그러짐과 잡음의 영향을 최소화하기 위하여 사용되는 S-MMA 적응 등화 알고리즘에서 Slice 가중치에 따른 성능을 비교하였다. 기존의 MMA 알고리즘에서는 등화기의 출력 신호와 송신 신호의 dispersion 상수만을 이용하지만, S-MMA에서는 등화기 출력 신호와 dispersion 상수외에 결정 장치의 출력 신호를 slice 상수만큼 고려하여 채널의 진폭과 위상 찌그러짐을 동시에 보상할 수 있다. 이때 slice 가중치가 적응 등화 알고리즘의 성능에 미치는 영향을 컴퓨터 시뮬레이션을 통해 확인하며, 성능 지수로는 등화기 출력 신호 성상도, 수렴 특성을 나타내는 잔류 isi, 최대 찌그러짐, MSE와 채널의 신호대 잡음비에 따른 SER을 사용하였다. 시뮬레이션 결과 slice 가중치가 적으면 잔류isi, 최대 찌그러짐과 MSE 성능이 우월하며, 가중치가 큰 경우 SER 성능이 우월함을 확인하였다.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1298-1307
• /
• 2017

The constant on-time current-mode controlled (COT-CMC) switching dc-dc converter is stable, with no subharmonic oscillation in its current loop when a voltage ripple in its outer voltage loop is ignored. However, when its output capacitance is small or its feedback gain is high, subharmonic oscillation may occur in a COT-CMC buck converter with a proportional-integral (PI) compensator. To investigate the subharmonic instability of COT-CMC buck converters with a PI compensator, an accurate reduced-order asynchronous-switching map model of a COT-CMC buck converter with a PI compensator is established. Based on this, the instability behaviors caused by output capacitance and feedback gain are investigated. Furthermore, an approximate instability condition is obtained and design-oriented stability boundaries in different circuit parameter spaces are yielded. The analysis results show that the instability of COT-CMC buck converters with a PI compensator is mainly affected by the output capacitance, output capacitor equivalent series resistance (ESR), feedback gain, current-sensing gain and constant on-time. The study results of this paper are helpful for the circuit parameter design of COT-CMC switching dc-dc converters. Experimental results are provided to verify the analysis results.

• 한국광학회지
• /
• 제8권2호
• /
• pp.116-121
• /
• 1997

주위온도에 따른 레이저다이오드의 광출력의 변화는 정전류로 구동하는 경우와 정전압으로 구동하는 경우에 서로 다르다. 레이저다이오드를 정전류로 구동하는 경우에는 온도증가에 따라 밀도반전이 감소하므로 광출력이 감소한다. 그러나 정전압으로 구동하는 경우에는 이러한 열효과에 의한 광출력의 감소이외에 내부저항과 임계전압의 감소에 의한 주입전류의 증가효과가 있어서 열효과를 일부 상쇄하므로 광출력의 변화가 정전류로 구동할 때보다 적다. 특히 정전압으로 레이저다이오드를 구동하는 경우에 이 두가지 효과에 의한 광출력의 변화폭이 비슷하여 서로 상쇄되는 동작점 부근에서는 온도에 따른 광출력의 변화가 아주 적어져 정전류로 구동하는 때보다 훨씬 광출력이 안정함을 실험적으로 확인하였다.

• 조명전기설비학회논문지
• /
• 제27권6호
• /
• pp.50-58
• /
• 2013

The Neutral Beam Injection(NBI) generates ultra-high temperature energy in the tokamak of nuclear fusion. The NBI consists of filament power supply acceleration and deceleration power supply and arc power supply(APS). The APS has characteristics of low voltage and high current. APS generate arc through constant output of voltage and current. So this paper proposed suitable buck converter for low voltage and high current. The case of proposed buck converter used parallel switch because it can increase capacity and decrease conduction loss. When an arc is generated, the NBI chamber occur high voltage. And it will break output capacitor of buck converter. Therefore the output capacitor was removed in the proposed converter. Thus buck converter with constant output is the most important design of the output inductor. In this paper, designed APS verified operation of system and stability through simulation and prototype.

• 한국통신학회논문지
• /
• 제34권2A호
• /
• pp.85-90
• /
• 2009

In this paper, as an alternative to constant modulus algorithm based on MSE, maximization of the probability that equalizer output power is equal to the constant modulus of the transmitted symbols is introduced. The proposed algorithm using the gradient ascent method to the maximum probability criterion has superior convergence and steady-state MSE performance, and the error samples of the proposed algorithm exhibit more concentrated density functions in blind equalization environments. Simulation results indicate that the proposed training has a potential advantage versus MSE training for the constant modulus approach to blind equalization.