• Journal of Conservation Science
• /
• v.34 no.1
• /
• pp.59-67
• /
• 2018

This study investigated manufacturing technique and provenance of the Gilt-bronze Seated Bhaisajyaguru (Medicine Buddha) Statue of Janggoksa Temple. The statue had the following : Cu(68.8%)-Sn(10.4%)-Pb(17.1%), it is similar to other medium or large Buddha statue. As results of comparison lead isotope ratio of sample with the provenance data were plotted in zone 3 of the South Korean galena map. According to this result of Bronze Buddha could be made into galena of the located in same area the temple. The results of this study were compared with the Bronze Bodhisattva statue of Goseongsa Temple. The manufacturing techniques were different based on the characteristics of Buddha statues and thus could be made into galena of the located in same area the temple.

• 보존과학연구
• /
• s.33
• /
• pp.69-83
• /
• 2012

Field experiments for Conservation damage on selected spots were carried out prior to direct conservation treatments for Bangudae Petroglyphs in Ulsan. It was found that there is a big difference in treatment effects according to the treatment technique and application rather than on the treatment material use. Based on the results of this study, a plan for the conservation treatment of Bangudae Petroglyphs will be suggested by providing new materials and application techniques for cracks, adhesive application and consolidation by conducting artificial weathering tests and continued monitoring.

• Journal of Conservation Science
• /
• v.35 no.4
• /
• pp.309-316
• /
• 2019

This study intends to identify manufacturing techniques, including casting and alloy composition, of nine metal Buddha statues excavated from archaeological sites in Bagan, Myanmar. Two Buddha statues from Pyu city state(2^nd to 9^th century) contain Cu-Sn alloy(including <1 wt% Fe), with different relatively high percentages of Sn(16 wt% and 25 wt%) identified from each Buddha statue, and no Pb detected. Five Buddha statues from the Bagan dynasty contain various alloy ratios of Cu-Sn(including <1 wt% Pb), Cu-Sn-Pb, and Cu-Sn-Zn-Pb. All Buddha statues appear to be fabricated by casting, as there is no evidence of other heat treatments. The silver Buddha statue manufactured in the 18^th century includes >1% Cu besides silver with no additional metallic components identified. The bronze Buddha statue manufactured in the Konbaung dynasty(18^th century) is of Cu-Sn-Pb alloy. The Buddha statues of Pyu was alloy of Cu-Sn without Pb including ahigh percentage of The Buddha statues of both the Bagan and Konbaung dynasties are comprised of ternary Cu-Sn-Pb alloys, with a heterogeneous distribution of lead and tin. Some of Buddha statues of the Bagan dynasty have similar alloy ratios as those of Pyu, suggesting that similar manufacturing techniques were used.

• Conservation Science in Museum
• /
• v.24
• /
• pp.75-80
• /
• 2020

X-ray computed tomography (X-ray CT), which is often applied to the investigation of the interior structures of cultural properties, is very useful for studying production methods used in lacquerware that would otherwise be difficult to observe with the naked eye. Lacquerware inlaid with mother-of-pearl is an important subject in the study of traditional Korean craft. However, it can be a challenge to specify the production methods used in the framework of a lacquerware item unless the object has been structurally damaged. Studies of lacquerware inlaid with mother-of-pearl have thus far focused on the techniques of lacquering and of inlaying the mother-of-pearl. Production methods for the framework of lacquerware has received little academic attention. This study conducted X-ray CT on a lacquerware item from the Joseon period to reveal the materials and woodworking techniques used for the framework. The study revealed that softwood was used for the framework, and the post (gidungmok) and apron (soemok) were joined using a three-way miter joint (sambang yeongwi jjaim). Other pieces were joined with nails.

• 한국문화재보존과학회:학술대회논문집
• /
• 2003.09a
• /
• pp.15-16
• /
• 2003

• 한국문화재보존과학회:학술대회논문집
• /
• 2006.04a
• /
• pp.45-47
• /
• 2006

• Conservation Science in Museum
• /
• v.10
• /
• pp.21-27
• /
• 2009

This bamboo brush stand was made by attaching two bamboo tubes together, each 80mm in diameter. On the bottom is a "∞-shaped"wood board made of Ailanthus altissima. The surfaces are decorated with exquisite and dynamic designs of a dragon and clouds, and a deer and pine trees. Part of this bamboo brush stand was damaged, lost, or worn down, prior to conservation treatment. After conservation and recovery treatment, its original form was restored. Earth powder, chalk, and gluten mixture were used as materials to fill in the missing parts. After the original form was restored, thin silk fabric was attached to the inner surface of the glued part to prevent cracking. Traditional materials and repair techniques were used to allow for reversal of treatment, if necessary, as seen in the surface of the restored part being made antiquated with lacquer varnish.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.217-233
• /
• 2022

The remains found in Geumcheok-ri, Gyeongju are located in close proximity to the Ancient Tombs in Geumcheok-ri, Gyeongju (Historic Site) which were built between the late 5th and early 6th centuries, and these tombs are known to belong to the powerful rulers of that area. Using metallurgical techniques, this study was conducted on the iron objects obtained from the excavated remains in Geumcheok-ri, Gyeongju which are presumed to have a close relation to the nearby ruins that played an important role in the growth of Silla. To identify differences in manufacturing techniques based on the purpose of the iron objects, eight objects were selected after classifying them by use and the microstructure and non-metallic inclusions were investigated. The analyses results confirmed that the manufacturing process involved forging iron with a high or low carbon content to produce a particular shape, and that the carburization process was applied to iron post forging a shape to increase its strength when necessary. The mechanical properties were improved by selectively applying the steelmaking method and the heat treatment technique considering the functions of the parts, and the low temperature reduction was applied to the smelting process. Furthermore, in comparison with the iron objects excavated from the remains located in the center of Gyeongju and its outskirts, it is confirmed that there is similarity in the smelting and manufacturing techniques between these objects.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.77-83
• /
• 2010

The damage from the underground termite cannot be discovered with peculiar appearance of building but hollow phenomenon will occur. But there is no case in Korea as a non-destructive measurement of termite activation. Therefore, this research constructs non-destructive diagnostic techniques for wooden cultural properties using microwave detector (Termatrac, Australia). Result of maximun distance were measured 16cm (Pine tree, sensitivity 5, 6), 17cm (Zelkova and Douglas fir, sensitivity 5, 6). These results are expected that can be applied in the field. Result of field test using microwave detector, 33.8% of the wooden cultural properties were damaged by termites, and until now 7.8% (18 buildings) are being damaged in nationwide (total 231 buildings). Based on the above results, microwave detector will be able to be utilized effectively for detecting termite, preventing intrusion in wooden structure, and making full use of monitoring system periodically. In addition, it could be of great worth in preventing insect and microorganism in wooden structure.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.3
• /
• pp.113-125
• /
• 2000

This study was carried out to introduce current status and development strategy for an environmental restoration of stream side in Japan, and to consider a methodology which could be effectively applied for the environmental restoration of stream side in Korea. The strategy prospects of environmental restoration in Japan were summarized as follows : 1. When we establish the long term erosion control planning, we should make detail planning after considering of a certain block of watershed units. Because most of the disaster is caused by soil movement which was occurred by water contents. 2. Nowadays, the general torrent erosion control planning system in Japan focused on reducing the sediment such as by placement of erosion control facility and by restoration of afforestation, after calculation of several factors including expected amount of sediment, and the different amount of planned sediment and allowable sediment. 3. In the past, the goal of forest conservation and erosion control planing was to fix the amount of soil movement by construction of permanent facilities. While, the goal of forest conservation and erosion control planning in the future needs to change the techniques to a small and middle scale's soil movement which could prevent soil movement from large scale of soil disasters, but allow soil movement effectively. Also, it is considered to change erosion control dams from non passing type to passing type. 4. Restoration of stream-side ecology, erosion control for the conservation of ecology should be planned and conducted cautiously based on concepts of ecology conservation and development of environmentally sound techniques.