• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.93-99
• /
• 2008

The SeoulMerto, operating subway line No.$1{\sim}4$, was constructed in the metropolitan Seoul with the highest population. When it was built, the design was challenged to sharp curved tracks considering the protection of buildings, cultural assets, the connection to ground roads and rivers as well as to elevated railway in some parts. Lots of residential apartments and business complex have gradually increased in the area around subway stations and railway lines according to the urban development. Consequently, Requirements of better quality of life and comfortable environment caused the citizen complain for the noise. It has become one of serious social issues. In this paper, Noise level was analyzed using noise map measured in the running train of all routes. The analysis on the noise level was conducted according to railway type, track components type, seasonal type, retirement degree of the vehicle and subway station. Especially, Noise characteristics were analyzed by noise level data measured in the inside and outside of the train with geometry types of the concrete track. This study will contribute fundamental data for the "The Development of Sound-Absorbing Block on Concrete Track" promoted on The National R&D Project.

• Steel and Composite Structures
• /
• v.46 no.5
• /
• pp.673-687
• /
• 2023

In this study, the weight and the connections type layout of low-rise eccentrically braced frame (EBF) have been optimized based on performance-based design method. For this purpose, two objective functions were defined based on two different aspects on rigid connections, in one of which minimization and in the other one, maximization of the number of rigid connections was considered. These two objective functions seek to increase the area under the pushover curve, in addition to the reduction of the weight and selection of the optimum connections type layout. The performance of these objective functions was investigated in optimal design of a three-story eccentrically braced frame, using two meta-heuristic algorithms: Enhanced Colliding Bodies Optimization (ECBO) and Enhanced Vibrating Particles System (EVPS). Then, the reliability indices of the optimal designs for both objective functions were calculated for the story lateral drift limits using Monte-Carlo Simulation (MCS) method. Based on the reliability assessment results of the optimal designs and taking the three levels of safety into account, the final designs were selected and their specifications were compared.

• Science of Emotion and Sensibility
• /
• v.16 no.1
• /
• pp.43-52
• /
• 2013

"Time versus money effect" refers to a favorable shift in consumers' responses activated by time(vs. money). In general, how people spend their time or money could reflect one's personal identity. Previous research indicates that drawing individuals' attention to time makes more effective in product satisfaction rather than money. Also, whereas because time is experienced as an experience, time activates more positive product satisfaction for experiential product rather than materialistic product, money has the reverse effect because money relates with possessions. Present study examined the effect of time and money on consumers' attitudes and decisions and the role of product type including smartphone. In experiment 1, participants evaluated their experiences or their own products(family restaurant, smartphone, premium jean). They satisfied more with their smartphones when activated by time than by money. In experiment 2, 3 image ads, a promotion image ad for each product(family restaurant, smartphone, premium jean), were offered to find the effect of time and money in promotion ads. The interaction effects between activating condition and product type were revealed on the product attitudes, product satisfaction, purchase intent, and personal connection reflecting the consistent time effect on smartphone. In addition, the main effect of the activating condition was significant which meant time activating ads were more effective than money activating ads.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.2
• /
• pp.195-205
• /
• 2015

The rahmen bridge is well known common type of bridge in which all members are connected rigidly. The rahmen bridge is built for several situations because it has many advantages such as no need of bridge bearing system, easy of maintenance, reduction of the cross-sectional area of superstructure, and relatively low construction cost compared with other bridge types. Recently, to lengthen the span of rahmen bridge system, steel-concrete composite beam is used for superstructure of rahmen bridge instead of normal concrete girder with slab. However, member forces are increased because of extension of span length of superstructure and substructure is designed and constructed inefficiently when steel-concrete composite rahmen bridge is designed. In this study, new-type steel-concrete composite bridge is suggested. New-type steel-concrete composite rahmen bridge is adopted hinge connection between abutment and foundation for the reduction of the bending momemt at the foundation. In this study, we present the results of experiment conducted to estimate the load carrying capacity of new-type steel-concrete composite rahmen bridge and the structural characteristics of hinge connection.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.833-840
• /
• 2008

The time and cost can be reduced when applying partial precast concrete to the stair system in comparison to the cast-in-place or precast method. Because the performance of staircase which is used for evacuation can be largely different from connection types of precast concrete member, we tried to know structural behavior and performance evaluation according to each type of stair joints by experimental study. In the cast-in-place rigid joint, much reinforcement is needed in the end portion because much stress is concentrated in the middle portion. Also, in the pin joint which is used in the connection point, the maximum stress occurs in the middle point, so not only the amount of re-bar is increased but also the serviceability is largely decreased. The bolt type of semi-rigid joints proposed in this study had been increased strength and serviceability which is similar to the rigid joints. Also, its ductility was shown about 0.7 times in comparison to the rigid type and was about 2.8 times for the pin joint type. According to the classification of joint in Eurocode, it can be considered that it is one of the semi-rigid joints which are in the semi-rigid-full strength, and the structural behavior can be expected by using a model which applied to stiffness value decreased by 40 percent.

• Women's Health Nursing
• /
• v.9 no.3
• /
• pp.245-255
• /
• 2003

Purpose: This study is to define the structural patterns of pregnancy motivation of married women. Method: Q-methodology was used on 110 statements collected from interviews with women and a literature review. 38 Q-samples were selected. The Q-samples were administerd to 30 randomized P-sample. Result: Data analysis of Q-type obtained by QUANL program shows three types of subjectivity in the perception of pregnancy motivation. Type 1, $\ulcorner$Family-connection strengthening$\lrcorner$, Pregnancy motivation is characterized by the tendency to make home, to tie family member, to connect couple firmly. Type 2, $\ulcorner$Self-satisfaction$\lrcorner$, Women of this type take pleasure and happiness from child rearing in terms of being a mother and having maternal affection. Type 3, $\ulcorner$Self-centered$\lrcorner$, This type of pregnancy motivation puts on high emphasis on self achievement and they make a family planning suitable for the maternal role. Conclusion: The stronger was women's pregnancy motivation, the more positive were women's pregnancy experience and maternal role attainment. Conclusion: Therefore, When nurses take care of pregnancy women, they should understand the women's psycho-social aspects and then apply a program of nursing intervention to the pregnant women, It is necessary to continue to study on social and psychological problems related to pregnancy.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.3
• /
• pp.413-421
• /
• 2002

This study sought to understand the mechanical behavior according to the shape of the connecting part of the hybrid beam. This part is composed of central steel. with the end reinforced by concrete in the experiment of cyclic loading. The experimental result was compared and verified with the ultimate strength formula. Likewise, the composite effect and the effectiveness of seismic capacity and stress transmission were examined. The types of each setup were as follows: main bars by welding type, reinforcing by end-plate type, reinforcing by shear connector type, and shear connector type. Results showed that the reinforcing by end-plate type and the shear connector type had excellent strength and seismic capacity as well as better stress transmission. This was due to the unity between reinforced concrete and the steel's connecting part. However, the experimental result was somehow different from the previously established ultimate strength formula. Thus, a definite ultimate strength formula is required.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.4
• /
• pp.128-133
• /
• 2010

PURPOSE. The purpose of this study was to compare the accuracy of the implant master cast according to the type (pick-up, transfer) and the length (long, short) of the impression copings. MATERIALS AND METHODS. The metal master cast was fabricated with three internal connection type implant analogs (Osstem GS III analog), embedded parallel and with $10^{\circ}$ of mesial angulation to the center analog. Four types of impression coping were prepared with different combinations of types (transfer, pick-up) and lengths (long, short) of the coping. The impressions were made using vinyl polysiloxane (one step, heavy + light body) with an individual tray, and 10 impressions were made for each group. Eventually, 40 experimental casts were produced. Then, the difference in the distance between the master cast and the experimental cast were measured, and the error rate was determined. The analysis of variance was performed using the SPSS (v 12.0) program (${\alpha}$= .05), and the statistical significance was set at P < .05. RESULTS. The ANOVA showed that the pick-up type impression coping exhibited a significantly lower error rate than the transfer type. However, no significant difference was observed with respect to the length of the impression coping. Additionally, no significant difference was observed between the parallel and mesial angulated groups. CONCLUSION. Within the limitations of this study, the pick-up type impression coping exhibited a more accurate implant master cast than the transfer type in parallel group. The accuracy of the implant master cast did not differ for different lengths of impression coping of at least 11 mm. Additionally, the accuracy of the implant cast was not different for the parallel and $10^{\circ}$ mesial angulated groups.

• The Journal of the Korea Contents Association
• /
• v.6 no.2
• /
• pp.117-126
• /
• 2006

Although the Java bytecode has numerous advantages, there are also shortcomings such as slow execution speed and difficulty in analysis. In order to overcome such disadvantages, bytecode analysis and optimization must be performed. First control flow of the bytecode should be analyzed, after which information is required regarding where the variables are defined and used to conduct data flow analysis and optimization. There may be cases where variables with an identical name contain different values at a different location during the execution according to the value assigned to a variable in each location. Therefore, in order to statically determine the value and type, the variables must be separated according to allocation. In order to do so, the variables can be expressed using a static single assignment form. After the transformation into a static single assignment form, the type information of each node expressed by each variable and expression must be configured to perform static analysis and optimization. Based on the basic type information, this paper proposes a method for finding related equivalent nodes, setting the nodes with strongly connection components and efficiently assigning each node the type.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.828-837
• /
• 2020

This paper presents the optimal design of planar flyback transformer suitable for small-size and low-profile of AC to DC adapter for 10W tablet. This paper also proposes the injection winding transformer of Hybrid and Drum types capable of the winding method of automatic type and the reduction of transformer size and leakage inductance(L_k) compared to the conventional mass-production flyback transformer with the winding method of manual type. In particular, the injection winding transformer of Drum type proposed in this paper is constructed in a horizontal laying of its transformer to solve the connection problem of copper plate injection winding on the secondary side of the one of Hybrid type. The primary and secondary windings of the injection winding transformer of Hybrid and Drum types used the conventional winding and the copper plate injection winding, respectively. For the injection winding transformer of Hybrid and Drum types proposed in this paper, the optimal design of planar flyback transformer suitable for small-size and low-profile was carried out using Maxwell 2D and 3D tool.