• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.661-669
• /
• 2004

철골구조에 있어서 기둥 이음부의 설계는 단순히 적당한 틈에 용접이나 볼트에 의한 이음으로 해석 및 설계가 이루어지고 있는 것이 보편적인 현실이다. 이때 이음부에서 메탈터치에 의하여 상부의 응력을 하부로 전달하는 정도를 규정하는 기준은 각 나라마다 다르다. 미국은 설계자의 판단에 따라 모두 전달 가능하다는 규정아래 설계가 이루어지고 있으며, 우리나라와 일본의 경우는 25%까지 전달 가능하다는 규준에 의해 설계가 이루어지고 있어 그 차이가 너무 크다. 따라서 본 연구에서는 메탈터치에 의한 이음의 응력체계를 규명하여 이음의 합리성을 증진시키고, 이음의 경제성 및 시공성을 위해 틈의 위치 및 이음방법을 매개변수로 하여 메탈터치 실험을 실시하여 미국 및 일본 규준과 비교하였다. 또한 메탈터치 이음부의 거동을 실험적인 방법과 해석적인 방법을 통하여 분석하여 메탈터치 이음부의 설계에 필요한 기초 자료를 제공하고자 한다.

• 전기전자학회논문지
• /
• 제24권3호
• /
• pp.691-698
• /
• 2020

해상풍력 발전단지의 전력망 연계방식에 따라 설치비용이나 고장전류의 크기가 달라진다. 그렇기 때문에 단지의 용량과 위치 등을 고려한 효율적인 전력망 연계 방법이 필요하다. 특히 해상풍력 발전단지의 전력케이블은 대부분 비용 및 효율적인 부분을 고려하여 3-core를 사용한다. 케이블 단락 같은 고장이 발생하면 케이블 전체를 교체해야 하므로 수리비용 및 터빈 정지 기간을 고려하였을 때 비용적인 측면에서 상당한 손실이 발생할 수 있다. 따라서 본 논문에서는 제주해상에 설치될 100 MW 풍력단지에 방사형, 링형, 성형 방식을 도입하여 이에 따른 3상 단락고장을 PSCAD/EMTDC 프로그램을 활용하여 컴퓨터 해석을 수행하고, 그 결과를 분석하여 모델 단지에 알맞은 전력망 연계방식을 제안하고자 한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.27-32
• /
• 2008

In the present study, a conservative overset mesh technique has been developed on 2-D unstructured meshes. A new domain connection technique between independent mesh blocks was proposed to satisfy the conservation of mass, momentum, or energy in entire computational domain. The present technique was applied to several classical computational problems to validate the superiority of the conservative method to the non-conservative method.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.27-32
• /
• 2008

In the present study, a conservative overset mesh technique has been developed on 2-D unstructured meshes. A new domain connection technique between independent mesh blocks was proposed to satisfy the conservation of mass, momentum, or energy in entire computational domain. The present technique was applied to several classical computational problems to validate the superiority of the conservative method to the non-conservative method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.380-381
• /
• 2018

Under-voltage and over-voltage are the big problems in submarine distribution system. To solve that problems, integrated PV with voltage compensation method is proposed in this paper. This paper describes a simple method for controlling the series connection converter while the shunt connection operates as a back-up for sensitive load and verified by the PSIM software.

• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.19-28
• /
• 2018

Key factors that ensure competitiveness of modular unit include consistent high quality and connection condition that ensures high structural performance while minimizing the overall scale of the on-site process. However, it is difficult to evaluate the structural performance of the connection of modular unit, and its structural analysis and design method can be different depending on the connection to its development, which affects the seismic performance of its final design. In particular, securing the seismic performance is the key to designing modular systems of mid-to-high-rise structure. In this paper, therefore, the seismic performance of the modular system with bracket-typed fully restrained moment connections according to stiffness and the shapes of various connection members was evaluated through experimental and analytical methods. To verify the seismic performance, a cyclic loading test of the connection joint of the proposed modular system was conducted. As a result of this study, theoretical values and experimental results were compared with the initial stiffness, hysteresis behavior and maximum bending moment of the modular system. Also, the connection joint was modeled, using the commercial program ANSYS, which was then followed by finite element analysis of the system. According to the results of the experiment, the maximum resisting force of the proposed connection exceeded the theoretical parameters, which indicated that a rigid joint structural performance could be secured. These results almost satisfied the criteria for connection bending strength of special moment frame listed on KBC2016.

• Steel and Composite Structures
• /
• 제15권3호
• /
• pp.281-298
• /
• 2013

Composite special moment frame is one of the systems that are utilized in areas with low to high seismicity to deal with earthquake forces. Composite moment frames are composed of reinforced concrete columns (RC) and steel beams (S); therefore, the connection region is a combination of steel and concrete materials. In current study, a three dimensional finite element model of composite connections is developed. These connections are used in special composite moment frame, between reinforced concrete columns and steel beams (RCS). Finite element model is discussed as a most reliable and low cost method versus experimental procedures. Based on a tested connection model by Cheng and Chen (2005), the finite element model has been developed under cyclic loading and is verified with experimental results. A good agreement between finite element model and experimental results was observed. The connection configuration contains Face Bearing Plates (FBPs), Steel Band Plates (SBPs) enveloping around the RC column just above and below the steel beam. Longitudinal column bars pass through the connection with square ties around them. The finite element model represented a stable response up to the first cycles equal to 4.0% drift, with moderately pinched hysteresis loops and then showed a significant buckling in upper flange of beam, as the in test model.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제51권4호
• /
• pp.455-469
• /
• 2012

Given the importance of mathematical connections in instruction, this paper analyzed the objects and the methods of mathematical connections according to the lesson flow featured in 20 elementary lessons selected as effective instructional methods by local educational offices in Korea. Mathematical connections tended to occur mainly in the introduction, the first activity, and the sum-up period of each lesson. The connection between mathematical concept and procedure was the most popular followed by the connection between concept and real-life context. The most prevalent method of mathematical connections was through communication, specifically the communication between the teacher and students, followed by representation. Overall it seems that the objects and the methods of mathematical connections were diverse and prevalent, but the detailed analysis of such cases showed the lack of meaningful connection. These results urge us to investigate reasons behind these seemingly good features but not-enough connections, and to suggest implications for well-connected mathematics teaching.

• Tribology and Lubricants
• /
• 제37권4호
• /
• pp.136-143
• /
• 2021

This paper presents the loosening behavior that occurs after the application of an external load to internal and external connection types of dental implants using the finite element method. We use fastening force between an abutment and a fixture to clamp the dental implant system; however, loosening and breakage may occur owing to cyclic external loads. In this study, we considered the initial fastening condition in the pre-load analysis and then investigated the change in stress and contact surface status when applying external loads. After the application of the initial fastening load, we verified that the internal connection-type model exhibited a relatively lower stress distribution than that of the external connection-type one. Moreover, we found that the former model showed a lower stress concentration after the application of the external load. In addition, after the application of this load, we found that the higher the shear load acting on the implant system, the higher the possibility of loosening. The study results showed the change in stress distribution and contact surface according to the connection type of the dental implants and the phenomenon of loosening by cyclic loads. We expect that the results of this study will be useful for the study of reliability and design of dental implant systems.

• 대한치과보철학회지
• /
• 제44권2호
• /
• pp.174-184
• /
• 2006

Purpose: Current trend in implant dentistry is changing from external connection to internal connection. To evaluate the splinting of external and internal connection implant on screw loosening, 2-units prosthesis was fabricated with BioPlant $System^(R)$ of external connection type and Lifecore STAGE-1 Single Stage Implant $System^(R)$ of internal connection type. Material and Method: Experimental group is classified into three groups. 1) $G_1-EE$: 2-units prosthesis was fabricated with two Bioplant $System^(R)$ of external connection type. 2) $G_1-EI$: 2-units prosthesis was fabricated with one BioPlant $System^(R)$ of external connection type and one Lifecore STAGE-1 Single Stage Implant $System^(R)$ of internal connection type. 3) $G_1-II$: 2-units prosthesis was fabricated with two Lifecore STAGE-1 Single Stage Implant $System^(R)$ of internal connection type. In fabricating 2-units prosthesis, two hexed abutments are recommended when two implants are installed parallel, otherwise one hexed abutment is used on major occlusal force area and one nonhexed abutment is used on the other area. Since it is rare to find two implants being parallel, it is hard to fabricate prosthesis with passive adaptation using two hexed abutments. It is much more difficult to acquire passive adaptation when using hex abutment compared to nonhex abutment. To evaluate the influence of hexed and nonhexed abutment on screw loosening, 2-units prosthesis was fabricated with hexed and nonhexed abutment. Experimental group is classified into three groups. 1) $G_2-HH$: 2-units prosthesis was fabricated with two hexed abutments. 2) $G_2-HN$: 2-units prosthesis was fabricated with one hexed abutment and one nonhexed abutment. 3) $G_2-NN$: 2-units prosthesis was fabricated with two nonhexed abutments. Result: The results of comparing the detorque value after loading on a each prosthesis periodically are as follows. 1. In splinting group of external and internal connection implant, $G_1-II$ group demonstrated the biggest detorque value, followed by $G_1-EI$ group and $G_1-EE$ group. 2. There is no notable significance between external connection implant of $G_1-EI$ group and $G_1-EE$ group and also no significance between internal connection implant of $G_1-EI$ group and $G_1-II$ group. 3. $G_2-HH$ group showed higher detorque value than $G_2-HN\;and\;G_2-NN$ group. From the results, we can concluded that using both external connection and internal connection implant together is clinically acceptable and in order to acquire a good passive adaptation in fabricating 2-units implant prosthesis we can use two nonhexed abutments.