• 충청수학회지
• /
• 제26권4호
• /
• pp.793-798
• /
• 2013

Let ${\phi}$ be a map of a manifold M into another manifold N, L(N) the bundle of all linear frames over N, and ${\phi}^{-1}$(L(N)) the bundle over M which is induced from ${\phi}$ and L(N). Then, we construct a structure equation for the torsion form in ${\phi}^{-1}$(L(N)) which is induced from a torsion form in L(N).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.6-7
• /
• 2021

Although the development of free-form architectural technology continues, it consumes a lot of money and time due to the one-time formwork and the difficulty of maintaining quality due to manual work. To this end, in this study, a shape connection technique was proposed and verified to improve the limitations of implementing the curved surface of the existing lower multi-point press. In order to improve the accuracy of the shape, a curved surface was implemented using a silicon cap and a silicon plate. As a result of the error analysis of the shape, a small value of less than 3 mm was found. This study can implement more accurate curved surfaces than conventional technologies and produce high-quality free-form panels.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.922-925
• /
• 2004

Bluetooth technology is essentially a method for wireless connection of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments. The bluetooth system supports both point-to-point connection and point-to-multipoint connections. In point-to-multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There is one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The Bluetooth standard has been suggested that Bluetooth equipments can be used in the short-range, maximum 100 meters . It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1052-1057
• /
• 2004

Bluetooth technology is essentially a method for wireless connectivity of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments, The bluetooth system both point-to point connection and point-to multipoint connection. In point-to multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The bluetooth standard ha s been suggested that bluetooth equipments can be used in the short-range, maximum 100 meters. It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• Coupled systems mechanics
• /
• 제4권4호
• /
• pp.337-364
• /
• 2015

In this paper we present methodology for parameters identification of constitutive model which is able to present behavior of a connection between two members in a structure. Such a constitutive model for frame connections can be cast in the most general form of the Timoshenko beam, which can present three failure modes. The first failure mode pertains to the bending in connection, which is defined as coupled plasticity-damage model with nonlinear softening. The second failure mode is seeking to capture the shearing of connection, which is defined as plasticity with linear hardening and nonlinear softening. The third failure mode pertains to the diffuse failure in the members; excluding it leads to linear elastic constitutive law. Theoretical formulation of this Timoshenko beam model and its finite element implementation are presented in the second section. The parameter identification procedure that will allow us to define eighteen unknown parameters is given in Section 3. The proposed methodology splits identification in three phases, with all details presented in Section 4 through three different examples. We also present the real experimental results. The conclusions are stated in the last section of the paper.

• Structural Engineering and Mechanics
• /
• 제35권4호
• /
• pp.431-457
• /
• 2010

This article provides a discussion of the mathematic modeling of connections for designing and qualifying structures, systems, and components subject to monotonic or cyclic loading. To characterize the force-deformation behavior of connections under monotonic loading, a review of the Ramberg-Osgood, Richard-Abbott, and Menegotto-Pinto models is conducted, and it is shown that these nonlinear functions can be mathematically derived by scaling up or down a linear force-deformation function. A generalized four-parameter model for simulating connection behavior is investigated to facilitate nonlinear regression analysis. In order to perform seismic analysis of frameworks, a hysteretic model accounting for loading, unloading, and reloading is described using the established monotonic model. For preliminary analysis, a method is provided to quickly determine the model parameters that fit approximately with the observed data. To reach more accurate values of the parameters, the methods of nonlinear regression analysis are investigated and the modified Levenberg-Marquardt and separable nonlinear least-square algorithms are applied in determining the model parameters. Example case studies illustrate the procedure for the computation through the use of experimental/analytical data taken form the literature. Transformation of connection curves from the three-parameter model to the four-parameter model for structural analysis is conducted based on the modeling of connections subject to fire.

• 복식
• /
• 제55권6호
• /
• pp.125-140
• /
• 2005

The purpose of this study is to define the special characteristics of the neoclassic style in eighteenth to nineteenth century fashion. Researching into philosophy and aesthetics in eighteenth to nineteenth century, the characteristics of the neoclassic style in fashion is considered the clarity of form, the utility of function, and the sensuality combined with body. The results of this study are as follows: The clarify of form is found in geometric form based on anatomical truth of the human body in relation with rational and scientific thoughts. The utility of function is found in simple and suitable construction considering purely practical purpose of dresses. The sensuality combined with body is found in natural silhouette dress alluding naked body in connection with Rousseau' naturalism. Understanding aesthetic value of the neoclassic style will help to develop fashion designs associated with neoclassical forms.

• 대한수학회보
• /
• 제26권2호
• /
• pp.159-164
• /
• 1989

Let M be a hypersurface of dimension n(.geq.2) in an (n+1)-dimensional real space form over bar M(c) with constant curvature c and H the second fundamental tensor of M. M is said to be birecurrent if here exists a covariant tensor field .alpha. of order 2 such that .del.$^{2}$H=H .alpha., where .del. is the connection of M. Also, M is said to be recurrent if there exists a 1-form .betha. such that .del.H=H .betha.. Matsuyama [2] recently proved that a recurrent hypersurface M in a real space form is locally symmetric and a complete irreducible birecurrent hypersurface M in a real space form is recurrent. The main purpose of this paper is to characterize the birecurrent or recurrent hypersurface M of a Riemannian manifold with constant curvature c and to prove that M is classified as a cylinder, $M^{n}$ (c) or ( $c_{1}$)* $M^{n-r}$ ( $c_{2}$) where 1/ $c_{1}$+1/ $c_{2}$=1/c.

• 대한수학회지
• /
• 제33권4호
• /
• pp.1069-1099
• /
• 1996

Let X be a smooth, simply connected and oriented closed fourmanifold such that the dimension $b_{2}^{+}(X)$ of a maximal positive subspace for the intersection form is greater than or equal to 3.

• 대한수학회논문집
• /
• 제21권4호
• /
• pp.729-737
• /
• 2006

We study Ribaucour transformations on nondegenerate local isometric immersions of Riemannian space forms into Lorentzian space forms with flat normal bundles. They can be explained by dressing actions on the solution space of Lorentzian Grassmannian systems.