• 지질공학
• /
• 제34권3호
• /
• pp.447-457
• /
• 2024

연구 대상은 신생대 제3기 현무암 지층과 단층 및 파쇄대가 다수 발달하고 있는 절취 암반 비탈면으로서 법면의 주향이 다양하게 변하는 원추형 형상을 나타낸다. 비탈면 내 불연속면은 단층과 단층대 및 파쇄대, 전단절리 및 인장절리가 발달하며, 구간별로 파괴의 유형과 규모는 비탈면 및 불연속면의 배향에 따라 다양하며, 평면파괴와 쐐기파괴가 우세하다. 비탈면 현황도 자료 및 비탈면 암반분류(slope mass rating, SMR), 암석의 물성 및 역학시험, 평사투영법, 지질횡단면도 분석 및 한계평형해석 등을 검토한 결과, 3개의 대표 단면 모두 허용 안전율 미달로 대책공법이 요구되었다. 안전성, 경제성, 시공성 등을 고려한 비탈면 안정성을 위해서는 사면구배완화공법과 함께 녹생토 표면처리 공법 및 낙석방지책 설치를 대책공법의 최적 방안으로 제시하며 적용 후의 비탈면 안전율은 모두 허용안전율 이상이었다. 비탈면 현황도 및 비탈면에 대해 수직인 여러 대표 구간의 지질횡단면도 작성, 대표단면으로 지질횡단면을 이용하여 한계평형 해석 및 대책공법에 대한 제시는 비탈면 3차원 해석과 안정성 검토에 관해 주요한 방법이 될 것으로 생각된다. 원추형 비탈면과 같이 주향이 다양하게 변화하는 경우는 다수의 지질횡단면도 작성이 필요하며, 한계평형해석을 위한 대표 단면은 구간별로 지질횡단면도를 기본도면으로 설정해야 한다.

• Geomechanics and Engineering
• /
• 제38권4호
• /
• pp.367-380
• /
• 2024

In this study, a prediction model for the cutting force evolution in brittle rocks was developed. This model is based on indentation tests using a conical pick at a cutting depth of 9 mm. The behavior of the indentation mechanism was analyzed in three phases by using Evans' cutting mode. The peak values in the force history identified these phases. The variation in the local strength of the rock caused a large offset in the model prediction of chipping. Regression analyses showed that there is a strong power relationship between the upper bound of the cutting force along with chipping and depth of cut. The slope of the three crushing phases has been found to increase sequentially (α₁<α₂<α₃). In addition, a positive correlation existed between the Schmidt hardness and brittleness index that affects the lower and upper bounds of chipping. Consequently, the results clearly demonstrate that the new model can reasonably predict the evolution of the cutting force based on experimental data. These results would be beneficial for engineers to design and select the optimum excavation machine to reduce mechanical vibration and enhance cutting efficiency.

• 한국소음진동공학회논문집
• /
• 제22권4호
• /
• pp.344-351
• /
• 2012

A disc spring consists of a conical disc. A load-displacement formula was newly developed in the form of energy method to consider both rigid and friction. The cross section of the disc spring has identical slope angles at the bottom of conical. To solve such a problem, an energy method calculation is proposed. To achieve the goal of this study, the proposed calculation is extended to a disc spring with friction. A firm basis background study based on Almen's work is presented in developing a new numerical approach to predict the available formulation for a disc spring with friction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.572-577
• /
• 2011

A disc spring consists of a conical disc. A load-displacement formula was newly developed in the form of energy method to consider both rigid and friction. The cross section of the disc spring has identical slope angles at the bottom of conical. To solve such a problem, an energy method calculation is proposed. To achieve the goal of this study, the proposed calculation is extended to a disc spring with friction. A firm basis background study based on Almen's work is presented in developing a new numerical approach to predict the available formulation for a disc spring with friction.

• 한국수산과학회지
• /
• 제27권2호
• /
• pp.173-182
• /
• 1994

A numerical experiment on the effective discharge of waste materials caused in recirculating aquaculture basins was performed. The numerical model used in this study was a 4-level hydrodynamic and advection-diffusion model. Flow structures and settling processes of ss in the various mathematical model basins are discussed. The calculated flow fields of the numerical basin corresponded well with the measured velocity in field basin. In the cases of steep bottom slopes in 4/30, the non-dimensional tractive force($U{\ast}/U{\ast}_c$) which is all important parameter for the deposition pattern of waste materials was stronger than with the mild slope one. The settling pattern of ss depended considerably on the degree of bottom slope of basin. To concentrate deposited waste materials into the center discharge pipe, it is useful to design a cylindrical basin with a steeply conical bottom. In addition, to prevent movement of the deposit area away from the center, it is necessary to locate the circulating ducts at diametrically opposed points on the basin sides.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.114-119
• /
• 2006

In this study, laminated composite umbrella type roofs structures such as stadium, exhibition, auditorium and museum are analyzed. These structures have not been dealt with so far because of the difficulty in modeling. These have been analyzed mostly by a simplified method or a grid analysis in design. In this study, better results can be obtained by using shell element. The behavior of umbrella type shell roof under self weight is analyzed for various parameters such as the influence of diaphragm, diaphragm type, ${\gamma}-angle$ type, height/chord ratio of segment, slope of roofs, number of conical segment and subtended angle.

• Advances in aircraft and spacecraft science
• /
• 제10권5호
• /
• pp.457-471
• /
• 2023

The paper evaluates the aerodynamic coefficients on a blunt-nose re-entry capsule with a conical cross-section followed by a cone-flare body. A computer code is developed to solve three-dimensional compressible inviscid equationsfor flow over a Space Recovery Experiment (SRE) configuration at different flare-cone half-angle at Mach 6 and angle of attack up to 5°, at 1° interval. The surface pressure variation is numerically integrated to obtain the aerodynamic forces and pitching moment. The numerical analysis reveals the influence of flare-cone geometry on the flow characteristics and aerodynamic coefficients. The numerical results agree with wind tunnel results. Increase of cone-flare angle from 25° to 35° results in increase of normal force slope, axial forebody drag, base drag and location of centre of pressure by 62.5%, 56.2% and 33.13%, respectively, from the basic configuration ofthe SRE of 25°.

• 대한기계학회논문집A
• /
• 제32권2호
• /
• pp.105-118
• /
• 2008

The newly developed analysis method for nanoindentation load-displacement curves are focused on not only obtaining elastic modulus and hardness values but also other mechanical properties, such as yield strength and strain hardening properties. Dao et al. developed a forward and reverse algorithm to extract the elasto-plastic properties of materials from the load-displacement curves obtained in nanoindentation test. These algorithms were only applicable for engineering metals (Poisson#s ratio 0.3) using the equivalent conical indenter of the Berkovich. However, the applicable metals are substantially limited because range of used in the finite element analysis is narrow. This study is designed to expand range of the applicable metals in the reverse algorithms established by Dao et al. and to improve the accuracy of that for extracting the elasto-plastic properties of materials. In this study, a representative strain was assumed to vary according to specific range of $E^*/{\sigma}_r$ and was defined as function of $E^*/{\sigma}_r$. Also, an initial unloading slope in reverse algorithms improved in this study was not considered as independent parameters of the load-displacement curves. The mechanical properties of materials for finite element analysis were modeled with the elastic modulus, E, the yield strength, ${\sigma}_y$, and the strain hardening exponents, n. We showed that the representative strain (0.033) suggested by Dao et al. was no longer applicable above the $E^*/{\sigma}_r$ of 400 and depended on values of $E^*/{\sigma}_r$. From these results, we constructed the dimensionless functions, in where the initial unloading slope was not included, for engineering metals up to $E^*/{\sigma}_r$ of 1500. These functions allow us to determine the mechanical properties with greater accuracy than Dao#s study.

• 한국수산과학회지
• /
• 제17권1호
• /
• pp.15-23
• /
• 1984

모형통발에 대한 새우의 행동에 관한 수조실험과 민꽃게를 주대상으로 하고 붕장어 등을 혼획할 수 있는 실물 통발에 의한 시험을 한 바는 대략 다음과 같다. 1. 모형통발 실험에서 나일론 망지, 폴리에틸렌망지 및 면망지등 망지의 재료를 달리한 경우 입망마리수의 차이가 거의 없었으나 입구의 형태에서는 밑판의 경사 각도가 클수록 입망마리수와 도피율이 낮았다. 원추형 입구에서는 각주형입구보다 도피율이 낮았다. 2. 미끼의 종류에 대한 실험에서는 바지락, 새우, 전갱이, 고등어, 어류의 내장 및 족발등 여러 가지 미끼에 대한 선택성을 실험하였는데 미끼의 종류 보다는 신선도가 더 중요한 것 같이 생각된다. 3. 5가지 실물통발을 사용하여 실지시험한 결과에서는 양쪽에 입구가 있는 원추형(A형), 입구가 양쪽에 있는 각주형(C형) 및 C형에 혀그물이 달린 D형에서 민꽃게의 어획이 좋았고, 입구가 웃면에만 어주형(B형)과 철틀을 달아 2층으로 한 E형에서 어획이 나쁘다. 4. 붕장어의 어획은 A형, D형에서 많고, B형 E형에서 적은 경향이 있으나 C형은 특이하게 A형보다 어획이 적을뿐 다른 어느 형과도 유의차를 보이지 않는다. 5. B형, E형은 고기의 입망 어려운 반면 A형 C형은 고기의 입망이 쉬우나 도피도 쉬우며, 특히 C형은 도피가 더욱 쉽다. 결국 도피는 각주형 통발 보다 원추형 통발에서 더 어렵고, 혀그물이 없는 것보다 있는 것에서 더 어려운 것으로 나타났다.