• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제18권1호
• /
• pp.41-54
• /
• 2014

This study investigated the visual-mental capability of pre-service and in-service mathematics teachers as well as academicians making a career change to mathematics teachers with regard to manipulations of two geometric shapes (from 2- to 3-dimensional). Moreover, it investigated whether there are differences between the visual-mental capability of these participant groups. Findings illustrate that most of the participants demonstrate an adequate visual capability relating to the task dealing with a cube. Conversely, very low percentage of participants manifested a visual-mental capability in a task requiring the identification of a solid resulting from rotation of a square page, whose diagonal serves as the rotation axis. The study indicates that learners' high visual view should be developed in order to enhance their visual-mental capability.

• 소성∙가공
• /
• 제20권6호
• /
• pp.432-438
• /
• 2011

A method for estimating the shear spinnability is suggested, and it was applied to sheets of Ti-6Al-4V alloy for estimation of shear spinnability at hot working temperature. The effective working temperature was $850^{\circ}C$ or above. The hot spinning operation was carried out in two steps of shear spinning. The reduction of thickness at the first step was 50% and 45% at the second, and the overall reduction of thickness was 72.4%. The cone spinning process could produce a uniform wall thickness with only a few percent tolerance, proving itself appropriate for making cones of Ti-6Al-4V alloy with uniform wall thickness.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.307-307
• /
• 2011

Graphene is the hottest topic in condensed-matter physics due to its unusual electronic structures such as Dirac cones and massless linear dispersions. Graphene can be epitaxially grown on various metal surfaces with chemical vapor deposition processes. Such epitaxial graphene shows modified electronic structures caused by substrates. Here, local geometric and electronic structures of graphene grown on Ru(0001) will be presented. Scanning tunneling microscopy (STM) and spectroscopy (STS) was used to reveal energy dependent atomic level topography and position-dependent differential conductance spectra. Both topography and spectra show variations from three different locations in rippled structures caused by lattice mismatch between graphene and substrate. Based on the observed results, structural models for graphene on Ru(0001) system were considered.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.114-114
• /
• 2011

Graphene is the hottest topic in condensed-matter physics due to its unusual electronic structures such as Dirac cones and massless linear dispersions. Graphene can be epitaxially grown on various metal surfaces with chemical vapor deposition (CVD) processes. Such epitaxial graphene shows modified electronic structures caused by substrates. In the method for removal of the effect of substrate, there are bi, tri-layer graphene, gold intercalation, and oxygen intercalation. Here, We will present the changes of geometric and electronic structure of graphene grown on Ru(0001) by oxygen intercalation between graphene and Ru(0001). Using Scanning tunneling microscopy (STM) and spectroscopy (STS), we observed the aspect that the band gap features near the fermi level of graphene on Ru(0001) system is shifted and narrow. Based on the observed results, two effects by intercalated oxygen were considered.

• Design & Manufacturing
• /
• 제2권4호
• /
• pp.1-4
• /
• 2008

Micro pattern is applied to the light guiding plate(LGP) to enhance the uniformity of the brightness of the LCD. The micro cones are molded in intaglio on the surface of the LGP. The surface roughness of each cone was 40nm and 38nm in negative and positive die for laser ablation. In chemical etching, the surface roughness was 25nm, 24nm in negative and positive. And the surface roughness of negative and positive dies were 4nm and 5nm for LIGA-reflow process.

• 한국농공학회지
• /
• 제45권2호
• /
• pp.96-106
• /
• 2003

134 Dutch cone (mechanical cone) and 9 piezocone (electronic cone) penetration tests have been performed in the southwestern part of Korea. In general, Dutch cone results may be different from that of piezocone due to the difference in structure of the cones. 6 Dutch cone and piezocone test data which were obtained at the same point respectively, were analyzed and plotted in soil classification chart proposed by Robertson et. al.(1986, 1990). Cone factors of Dutch cone and piezocone test empirically have been determined using laboratory and field vane test results. Using this cone factors, it was shown that there was good correlation between shear strength estimated using cone resistance and that of laboratory test and field vane tests. It was found that there was a good correlation between cone resistance from Dutch cone and that from piezocone. Relationship formula was also suggested. Dutch cone test provides a useful means for stratigraphic profiling in large project and has some advantage over piezocone in particular situations, such as very soft clay ground and dredged area.

• 대한화학회지
• /
• 제7권2호
• /
• pp.144-152
• /
• 1963

브리스톨釉藥을 콘 5, 8, 11 番으로 燒成했을때 나타나는 狀態에 對한 組成變化와 粒度의 京鄕을 硏究하여, 밝은 半艶消 또는 艶消釉藥을 얻을 수 있었다. 卽 各 釉藥에 對한 熱成範圍, 曲强度 및 光澤, 平滑性, 乳白度, Eggshelling, 龜裂, Pinholing, Crawling 等에 對한 因子를 決定하므로서 얼마나, 珪酸, 알카리, 石灰를 變化시켜 實際 使用可能한 良好한 釉藥을 얻었다. 製造된 브리스톨釉藥은 最低 콘 5番부터 11번 또는 그 以上에서 긴 熟成範圍를 나타냈다. Crawling의 傾向에 있어서는 ZnO 量이 增加될때 特히 甚했으나, $Al_2O_4:\;SiO_2$의 比가 크고 ZnO 量이 많을때 乳白度가 顯著하였다. 釉藥의 粒子를 가늘게 하면 熱成이 잘되나 微粒이면 Crawling이 커진다. 釉藥두께를 增加해도 Crawling 傾向이 커진다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.237-244
• /
• 2002

A comparative study of 134 mechanical (Dutch cone) and 9. electronic cone (Piezocone) penetration data from the southern part of Korea has been performed. In general, Dutch cone results may be different from piezocone results due to the difference in structure of the cones. Cone penetrometer test data were analyzed and plotted in soil classification chart proposed by Robertson et. al.(1986,1990) Cone factors of Dutch cone and piezocone test have empirically been determined using laboratory and field vane test results. Using this cone factors, it was shown that there was good correlation between shear strength estimated using cone resistance and that of laboratory test and field vane tests. It was found that there was a good correlation between cone resistance from Dutch cone and that from piezocone. Dutch cone test provides a useful means for stratigraphic profiling in large project and has some advantage over piezocone in particular situations, such as very soft clay ground and dredged area.

• Journal of applied mathematics & informatics
• /
• 제28권5_6호
• /
• pp.1395-1408
• /
• 2010

In this paper, a pair of Wolfe type second-order nondifferentiable multiobjective symmetric dual program over arbitrary cones is formulated. Weak, strong and converse duality theorems are established under second-order (F, $\alpha$, $\rho$, d)-convexity assumptions. An illustration is given to show that second-order (F, $\alpha$, $\rho$, d)-convex functions are generalization of second-order F-convex functions. Several known results including many recent works are obtained as special cases.

• Journal of Plant Biology
• /
• 제17권2호
• /
• pp.95-98
• /
• 1974

This experiment was undertaken with the purpose of investigating effect of gibberellin on the growth and electron microscopic ultrastructure of hop(Humulus lupulus var. Hallertau) shoot apex. The results are as follows. 1) The growth of stem in the plots treated with GA(10, 25, and 50ppm) is more predominant than control. The leaves and cones of treated plots turn to pale green. 10ppm plot of GA treatment is the most effective in growth and yield than the others. 2) Under the GA-treated condition, it is believed that the nucleoplasmic index (NP) are higher than the control, and so nucleus, nucleolus, mitochondria, primary cell wall, middle lamella, and etc. tends to be larger than the control. 3) Mitochondria contained in the cell of shoot apex treated with concentration of 10ppm GA was seemed to increases in number and be larger in size than the control.