• 한국전자통신학회논문지
• /
• 제19권3호
• /
• pp.589-602
• /
• 2024

열전 발전기(TEG)는 일반적으로 열 변환 효율이 높지 않다. 열전 발전기 모듈의 성능은 재료의 특성, 다리의 개수 외에도 다리의 형상에 따라 달라진다. 본 연구에서는 폐열을 효율적으로 수확할 수 있도록 열전소자의 다리 형상을 원통형, 큐브형 등 다양한 기하학적 구조로 모델링하여 전기적 특성을 수치상으로 비교하였다. 다리 형상에 따른 온도분포 및 발전량을 비교하였고 기존 Cube 모양이 가장 높게 나타났다. 냉각효과를 적용한 발전량을 비교한 결과 자연대류에서는 Cone, 강제대류에서는 Hourglass 모양이 가장 높았다. 본 연구 결과에 따르면 기하학적 구조가 열전 발전기의 효율에 영향을 미칠 수 있음을 확인하였다

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.146-149
• /
• 2002

The aim of stereotactic radiosurgery(SRS) is to deliver a high dose to a target region and a low dose to critical organ through only one or a few irradiation. To satisfy this aim, optimized irradiating conditions must be searched in the planning. Thus, many mathematical methods such as gradient method, simulated annealing and genetic algorithm had been proposed to find out the conditions automatically. There were some limitations using these methods: the long calculation time, and the difficulty of unique solution due to the different shape of tumor. In this study, optimization protocol using ideal models and data base was proposed. Proposed optimization protocol constitutes two steps. First step was a preliminary work. Some possible ideal geometry shapes, such as sphere, cylinder, cone shape or the combination, were assumed to approximate the real tumor shapes. Optimum variables such as isocenter position or collimator size, were determined so that the high dose region could be shaped to fit ideal models with the arrangement of multiple isocenter. Data base were formed with those results. Second, any shaped real targets were approximated to these models using geometry comparison. Then, optimum variables for ideal geometry were chosen from the data base predetermined, and final parameters were obtained by adjusting these data. Although the results of applying the data base to patients were not superior to the result of optimization in each case, it can be acceptable as a starting point of plan.

• Applied Microscopy
• /
• 제35권4호
• /
• pp.42-54
• /
• 2005

본 연구는 무당개구리과 (Discoglossidae)의 무당개구리(Bombina orientalis) 정자의 형태적 특징을 광학현미경과 주사 및 투과 전자현미경으로 관찰하였다. 정자두부는 전 후방의 끝이 뾰족하고 다소 유연성을 갖는 초생달 혹은 버들 잎 모양의 특이한 구조를 취하고 있었다. 핵은 전 후방이 가늘고, 중앙 부분은 굵은 원뿔형이었다. 염색질은 완전하게 농축되어 있지 않고, 마치 널빤지를 겹쳐 놓은 듯한 지붕모양과 같은 형태로 불규칙하게 배열되어져 있었다. 핵 내에는 불규칙한 형태의 nuclear lacunae들이 흩어져 있었다. 정자경부와 중편부는 발달 되어 있지 않았다. 편모는 9+2 구조의 axoneme, axial rod 그리고 undulating membrane을 가지고 있었다. 미토콘드리아들은 핵의 상단부를 둘러싸고 있는 protoplasmic bead내에만 국한되어 존재하고 있었다. 특히, 본 연구에서 핵의 전방부에서 중앙 부위로 주행하는 nuclear rod는 섬유성 다발로 구성되었으며, 마치 사람의 속눈썹 모양과 같은 형태를 취하며, 핵의 2/3까지 뻗쳐져 있었다.

• 대한기계학회논문집B
• /
• 제35권8호
• /
• pp.799-804
• /
• 2011

본 논문에서는 자연채광 시스템 LFLP(Linear Fresnel Light Pipe)와 DBLP(Double Blind Light Pipe)시스템을 비교하였다. LFLP시스템은 평행한 빛을 선형프레넬렌즈를 이용하여 선형 형태로 빛으로 집광하여 자연채광에 이용하는 시스템이며, DBLP시스템은 베네시안 형태의 블라인드를 이용하여 빛을 반사시켜 자연채광에 이용하는 시스템이다. DBLP시스템은 LFLP시스템을 개선한 것으로 시스템 앞쪽에 위치한 블라인드는 태양의 고도에 따른 빛을, 뒤쪽에 위치한 블라인드는 태양의 방위각에 따른 빛을 변광부로 반사시키도록 설계 되었다. DBLP시스템의 변광부는 콘모양으로 이루어 져 있으며 블라인드에 의해 반사된 빛을 산광부로 보내주는 역할을 하며, 산광부로 들어온 빛은 실내조명에 사용된다. 따라서 맑은날(clear sky)을 기준으로 두 시스템의 효율을 비교하면 DBLP시스템이 LFLP시스템보다 세배 높게 나오는 것으로 나타났다.

• Imaging Science in Dentistry
• /
• 제48권1호
• /
• pp.11-19
• /
• 2018

Purpose: This study compared the diagnostic accuracy of cone-beam computed tomography (CBCT) scans obtained with 2 CBCT systems with high- and low-resolution modes for the detection of root perforations in endodontically treated mandibular molars. Materials and Methods: The root canals of 72 mandibular molars were cleaned and shaped. Perforations measuring 0.2, 0.3, and 0.4 mm in diameter were created at the furcation area of 48 roots, simulating strip perforations, or on the external surfaces of 48 roots, simulating root perforations. Forty-eight roots remained intact(control group). The roots were filled using gutta-percha (Gapadent, Tianjin, China) and AH26 sealer (Dentsply Maillefer, Ballaigues, Switzerland). The CBCT scans were obtained using the NewTom 3G (QR srl, Verona, Italy) and Cranex 3D (Soredex, Helsinki, Finland) CBCT systems in high- and low-resolution modes, and were evaluated by 2 observers. The chi-square test was used to assess the nominal variables. Results: In strip perforations, the accuracies of low- and high-resolution modes were 75% and 83% for NewTom 3G and 67% and 69% for Cranex 3D. In root perforations, the accuracies of low- and high-resolution modes were 79% and 83% for NewTom 3G and was 56% and 73% for Cranex 3D. Conclusion: The accuracy of the 2 CBCT systems was different for the detection of strip and root perforations. The Cranex 3D had non-significantly higher accuracy than the NewTom 3G. In both scanners, the high-resolution mode yielded significantly higher accuracy than the low-resolution mode. The diagnostic accuracy of CBCT scans was not affected by the perforation diameter.

• 한국방사선학회논문지
• /
• 제17권7호
• /
• pp.1157-1164
• /
• 2023

본 연구는 공간 해상력과 대조도가 우수한 kV X선 기반 OBI (On-Board Imager)와 CBCT (Cone-Beam CT)를 이용한 치료 부위별 추가 선량을 측정하고 영상유도방사선치료의 방사선 관리 측면의 적절성과 안정성을 평가하고자 한다. 실험 대상은 선형가속장치(Clinac IX)에 부착된 OBI와 CBCT, 링 모양의 Halcyon CBCT를 치료 부위별 방사선 촬영 조건으로 조사하여 동중심의 선량을 이온 챔버로 측정하였다. OBI의 1회 분할 피폭선량은 머리 부위 0.77 mGy, 흉부 3.04 mGy, 골반 부위 7.19 mGy로 계측되었다. Clinac IX CBCT와 Halcyon CBCT 두 장비의 피폭선량은 골반 부위에서는 두 장치의 피폭선량이 70.04 mGy, 70.45 mGy로 비슷하게 계측되었다. 흉부 CBCT에서는 Clinac IX 흡수선량(70.05 mGy)이 Halcyon 흡수선량(21.01 mGy)보다 높게 나타났다. 머리 부위에서도 Clinac IX 흡수선량(9.08 mGy) Halcyon의 흡수선량(5.44 mGy)보다 높게 나타났다. kV X선 기반 영상유도방사선치료는 광전흡수에 의한 추가 피폭선량이 치료 부위 전체 체적에 영향을 줄 수 있으며 주의가 필요하다.

• 한국지반공학회지:지반
• /
• 제5권3호
• /
• pp.19-28
• /
• 1989

본문은 전단과정에서 경화되는 모래와 같은 재료의 구성식을 연구하기 위하여 그 기초실험으로서 이미 경화된 콘크리트를 대상으로 3주응력을 독립적으로 제어할 수 있는 입방체삼축추축실험기를 통해 여러가지 응력경로 실험을 실시한 것이다. 실험으로서는 HC, CTC, TC, TE, SS 등 5종이고 그 들의 응력-변형률관계와 강도특성을 8면체면에서 고찰한 것이다. 이들을 통한 주요 결론은 다음과 같다. 1. 경화재료에 대한 전단강도의 크기는 CTC, TC, SS, TE의 순서이다. 2. 8면체전단강도는 응력경로에 의존하고 3. 또한 등방응력이 클수록 좋다. 4. 8면체면에서 극한포락선은 원추형상이다. 5. 마찰성재료인 경화재료에 대해서는 인장강도의 영향을 고려해야 한다.

• Archives of Plastic Surgery
• /
• 제37권2호
• /
• pp.169-174
• /
• 2010

Purpose: Reduction mammaplasty is a procedure with a relatively high patient satisfaction rate, however, associated scarring around the areola can be a serious problem. This study proposes a new modification of the breast reduction procedure by means of an inframammary incision alone. Methods: The breast is marked out preoperatively with standing position. Under the general anesthesia, an inframammary incision of approximately 7 - 8 cm is done. The subcutaneous plane is made in the lower pole of the breast, then the subglandular plane is entered and a sharp dissection is made up to 2 cm below the areola. The breast is mobilized from the chest wall and a cone-shaped parenchyme is removed in en-block except from the retroareolar central part. The remaining both pillars are gathered together with absorbable sutures and the base of the gland is narrowed to project the breast forward. The wound is closed in a layered fashion and taping of the breast mound is applied to redistribute the breast skin. Results: 21 patients (36 breasts) underwent this procedure from December 2004 to December 2009. Average follow up was 9 months (ranged from 6 months to 12 months). No major complication occurred. Most patients were pleased with the breast size, shape, and scars. However, 2 patients complained their hypertrophic scars which were corrected by revision. Conclusion: This technique is a simple approach to mild to moderate breast reduction through an inframammary incision alone. And, this technique provides an option with minimal complications and invisible scarring, which is especially important in the young patient group.

• Architectural research
• /
• 제22권1호
• /
• pp.33-39
• /
• 2020

In this study, side-face blowout failure strength of high strength headed reinforcing bar, which is vertically anchoring between RC or SFRC members, is evaluated throughout pullout test. The major test parameters are content ratio of high strength steel fibers, strength of rebar, length of anchorage, presence of shear reinforcement, and the side concrete cover thickness planned to be 1.3 times of the rebar. In pullout test, tensile force was applied to the headed reinforcing bar with the hinged supports positioned 1.5 and 0.7 times the anchorage length on both sides of the headed reinforcing bar. As a result, the cone-shaped crack occurred where the headed reinforcing bar embedded and finally side-face blowout failure caused by bearing pressure of the headed reinforcing bar. The tensile strength of specimens increased by 13.0 ~26.2% with shear reinforcement. The pullout strength of the specimens increased by 3.6 ~15.4% according to steel fiber reinforcement. Increasing the anchoring length and shear reinforcement were evaluated to reduce the stress bearing ration of the total stress.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.905-913
• /
• 2008

The water resource depending on mostly surface water has many problems, such as contaminated and unpredicted contamination event. For this reason, it has been employed highly technical treatment method for them, such as ground water dam and river bank filtration. it has been developed the radial collector wells in kind of bank filtration to increase efficiency for in-taking the water resource insead of the vertical well needed many wells to take more resource. But it has many problems with the incumbent method to bore the horizontal hole for radial collector wells, such as filling with the filter material outside of a strainer by watering, jamming as retrieving the casing tube with the filter material, eccentric boring etc. To reduce the problems of incumbent equipment, it has been developed the horizontal boring equipment and performed the field trial tests several times, which have bits and water jetting system with rotating the cone-shaped front to be excavated easily. In this paper, it was compared the brand-new with the incumbent non-rotating pressing insertion method. Also it was shown the problems of the incumbent method was reduced effectively.