• Natural Product Sciences
• /
• v.23 no.4
• /
• pp.265-269
• /
• 2017

Pseudolaric acids of Pseudolarix kaempferi (Pinaceae) have been known as diterpenoids with potent anti-fungal-, anti-microbial, and cytotoxic activities. In the present study, the five MeOH extracts were prepared from the five plant part (root bark, stem bark, leaf, the inner part of root, and cone) to find the relation between the concentration of pseudolaric acids and cytotoxicity. Pseudolaric acids B and C were isolated from the root bark of P. kaempferi to use them as standard compounds. The five extracts were tested on cytotoxicity against six cancer cell lines, A549 (lung), HCT116 (colon), MDA-MB-231 (breast), SNU638 (stomach), and SK-hep-1 (liver) by SRB assay, but against K562 (leukemia) by SRB- or MTT assay. HPLC quantification were performed on a Shisheido Capcell PAK C18 column ($5{\mu}m$, $4.6mm{\times}250mm$) using 254 nm wavelength. The cytotoxicity ($IC_{50}$, $0.36{\mu}g/ml$ on K562 cell lines) of the root bark extract was potent and the content (101.1 mg/g extract) of pseudolaric acid B was very high in the root bark. These results suggest that the MeOH extract obtained from the root bark could be developed as the anti-cancer agent with a high quantity of pseudolaric acid B.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.35-43
• /
• 2020

Currently, cofferdams of circular cross section are widely applied as temporary facilities for the installation of bridge foundations in river/sea bridge construction in Korea. Existing caisson, sheet pile, and cell type cofferdam are widely used, but these methods take a lot of time and cost for installation and dismantling. In the case of the existing sheet pile construction method, attention is needed to secure internal and external stability because of the damage to the sheet pile due to ground penetration and difficulty in connecting element members. In this study, penetration design of circular steel pipes using suction pressure was performed on the soft ground of the west coast, and it was confirmed that penetration construction using suction pressure was possible through field tests. It was confirmed that applying the ground analysis results using the cone penetration test (CPT) to the design rather than the standard penetration test (N value) results more similar to the field test results. In addition, it was confirmed that local failure of the inside of the cofferdam was induced when a suction pressure higher than the upper limit suction pressure was applied in the silty sand.

• BMB Reports
• /
• v.49 no.2
• /
• pp.69-70
• /
• 2016

Mutations of orthodentricle homeobox 2 (OTX2) in human and mice often cause retinal dystrophy and nyctalopia, suggesting a role of OTX2 in mature retina, in addition to its functions in the development of the eye and retina. In support of this, the number of bipolar cells in Otx2^+/− post-natal mouse retina was found to be significantly lower than normal. Degeneration of the cells becomes greater as the mice age, leading to the loss of vision. Especially, the type-2 OFF-cone bipolar cells, which do not express Otx2 mRNA but carry Otx2 protein, are most sensitive to Otx2 haplodeficiency. Interestingly, this bipolar cell subpopulation imports Otx2 protein from photoreceptors to protect itself from glutamate excitotoxicity in the dark. Moreover, in the bipolar cells, the exogenous Otx2 relocates to the mitochondria to support mitochondrial ATP synthesis. This novel mitochondrial activity of exogenous Otx2 highlights the therapeutic potential of Otx2 protein transduction in retinal dystrophy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.1
• /
• pp.9-15
• /
• 2005

The objective of this study is screening the shear stress related proteins in chondrocytes using twodimensional electrophresis and MALDI-TOF. C-28/I2 cell line were grown. The fluid-induced shear stress(FISS) was applied using a cone viscometer at a rotational velocity of 80rpm for periods of 12 hours. Control cultures were tested under identical conditions without mechanical load application. Collected samples were used for the two-dimensional electrophoresis and MALDI-TOF. The identified proteins were calcyclin, RPE-spondin, interleukin-2, extracellular signal regulated kinase (ERK), lamin B2, porA protein, and RET-ELE1 protein. All of them showed a decreased expression. In conclusion, seven proteins were identified as a shear stress related proteins in chondrocytes. As the destruction of articular cartilage is one of main pathogenesis of TMJ internal derangement, this study will give useful information for the understanding of the molecular aspect of TMJ disease.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.1
• /
• pp.69-75
• /
• 2016

Polydimethylsiloxane (PDMS) is used as a scaffold for cell culture. Because both the stress and strain acting on the substrate and the hemodynamic environment are important for studying mechano-transduction of cellular function, the traction force of the surface of a substrate has been measured using fluorescence images of particle distribution. In this study, deformation of the cross-sectional plane of a PDMS block was measured by correlating particle image distributions to validate the particle image strain measurement technique. Deformation was induced by a cone indentor and a shearing parallel plate. Measured deformations from particle image distributions were in agreement with the results of a computational structure analysis using the finite-element method. This study demonstrates that the particle image correlation method facilitates measurement of deformation of a polymer scaffold in the cross-sectional plane.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.336-336
• /
• 2011

Over the past decades, organic semiconductors have been investigated intensely for their potential in a wide range of optoelectronic device applications since the organic materials have advantages for very light, flexible and low cost device fabrications. In this study, we fabricated small-molecule organic solar cells (OSCs) based on chloro[subphthalocyaninato]boron(III) (SubPc) as an electron donor and $C_{60}$ as an electron acceptor material. Recently SubPc, a cone-shaped molecule with $14{\pi}$-electrons in its aromatic system, has attracted growing attention in small-molecule OSC applications as an electron-donating material for its greater open-circuit voltage (VOC), extinction coefficient and dielectric constant compared to conventional planar metal phthalocyanines. In spite of the power conversion efficiency (PCE) enhancement of small-molecule OSC using SubPc and $C_{60}$, however, the study on the interface between donor-acceptor heterojunction of this system is limited. In this work, SubPc thin films at various thicknesses were deposited by organic molecular beam deposition (OMBD) and the evolution of surface morphology was observed using atomic force microscopy (AFM) and field emission scanning electron microscopy (FE-SEM). We also investigated the influence of film thickness and surface morphology on the PCE of small-molecule OSC devices.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.12
• /
• pp.5212-5230
• /
• 2016

How to determine the right number of small base stations to activate in multi-cell uplinks to match traffic from a fixed quantity of K users is an open question. This paper analyses the uplink cooperative that jointly receives base stations activation to explore this question. This paper is different from existing works only consider transmitting power as optimization objective function. The global objective function is formulated as a summation of two terms: transmitting power for data and coordinated overhead for control. Then, the joint base stations activation and beamforming problem is formulated as a mixed integer second order cone optimization. To solve this problem, we develop two polynomial-time distributed methods. Method one is a two-stage solution which activates no more than K small base stations (SBSs). Method two is a heuristic algorithm by dual decomposition to MI-SOCP that activates more SBSs to obtain multiple-antennae diversity gains. Thanks to the parallel computation for each node, our methods are more computationally efficient. The strengths and weaknesses of these two proposed two algorithms are also compared using numerical results.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.464-475
• /
• 2009

Electrical resistivity can be used for porosity estimation. In order to improve previously developed ERCP(Electrical Resistivity Cone Probe), 4ERP(4 Electrical Resistivity Probe), which has Wenner array at the tip of probes, has been developed. In properties of current flow Wenner array measures electrical properties of undisturbed area during penetration and relatively correct measurements are guaranteed without polarization. Furthermore, Wenner array equation can estimate electrical resistivity without extra calibration. 4ERP is developed into 2 types, penetration and fixation. Penetration type has wedge-shaped tip. Considering disturbance minimization, fixed type has plane tip. Fixed type 4ERP in consolidation cell measure electrical resistivity increment along porosity decrease, and penetration type 4ERP measured resistivity profile along the depth in chamber. Applying Archie's law, porosity profile was estimated with electrical resistivity. The tests result suggests that 4ERP can be new site investigation equipment with little disturbance.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.522-527
• /
• 2009

A photocrosslinkable polyphosphazene was used for molecular imprinting. We synthesized polyphosphazene (3) having urea groups for complexation with N-carbobenzyloxyglycin (Z-Gly-OH, template) and chalcone groups for cross-linking reaction. As substituents, 4-hydroxycha1cone (1) and N-(4-hydroxyphenyl)-N'-ethylurea (2) were prepared. Choloro groups of poly(dichlorophosphazene) were replaced by the sequential treatment with sodium salts of compounds 1 and 2, and trifluoroethanol. The template molecule was complexed with the urea groups on the polymer chains via hydrogen bonding. A thin polymer film was prepared by casting a solution of the complex of polymer 3 and the template in dimethylformamide on a quartz cell and irradiated with 365 nm UV light to yield a cross-linked film with a thickness of about $16{\mu}m$. The template molecules in the film were removed by Soxhlet extraction with methanol/acetic acid. The control polymer film was prepared in the same manner for the preparation of the imprinted polymer film, except that the template and triethylamine were omitted. In the rebinding test, the imprinted film exhibited much higher recognition ability for the template than the control polymer. We also investigated the specific recognition ability of the imprinted polymer for the template and its structural analogues. The rebinding tests were conducted using Z-Glu-OH, Z-Asp($O^tBu$)-OH, and Z-Glu-OMe. The imprinted film showed higher specific recognition ability for the template and the lowest response for Z-Asp($O^tBu$)-OH.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.48-52
• /
• 2009

Micro-hole targets are studied to generate energetic protons from laser-thin foil targets by using 2-dimensional particle-in-cell simulations. By using a small hole, the maximum energy of the accelerated proton is increased to 4 times higher than that from a simple planar target. The main proton acceleration mechanism of the hole-targets is the electrostatic field created between the fast electrons accelerated by the laser pulse ponderomotive force combined with the vacuum heating and the target rear surface. But in this case, the proton angular distribution shows double-peak shape, which means poor collimation and low current density. By using a small cone-shaped hole, the maximum proton energy is increased 3 times higher than that from a simple planar target. Furthermore, the angular distribution of the accelerated protons shows good collimation.