• 한국광학회지
• /
• 제19권4호
• /
• pp.310-314
• /
• 2008

PDP(plasma display panel)를 비롯한 대형 디스플레이는 외부의 광이 디스플레이 내부로 입사될 경우 화질 및 명암이 저하된다. 이 문제를 해결하기 위해서 최근 관련 산업체에서는 $1\;m^2$급의 대형 투명필름 위에 수십${\sim}$수백 ${\mu}m$ 수준의 미세 패턴을 새겨서 외부 광을 차단하는 contrast 향상 필름을 개발 중이다. 이 필름이 디스플레이에 적용되려면 가장 중요한 것이 패턴의 균일도 및 이물 여부이다. 하지만 기존의 검사장비로는 $1\;m^2$급의 대형 광학 필름을 $100\;{\mu}m$ 수준의 분해능으로 짧은 시간 내에 측정할 수 없다. 본 연구에 서는 이것이 가능한 검사장비를 제안, 구축하며 실험을 통해 평가한다.

• 한국광학회지
• /
• 제19권4호
• /
• pp.249-254
• /
• 2008

새 구조의 액정 엑스선 감지기를 만들었다. 이것은 액정판을 만들고 유리판을 얇게 식각한 다음, 그 유리판 위에 반사막과 광전도층을 연속하여 입힌 구조이다. 새 구조의 액정엑스선 감지기는 공정의 안정성, 대면적화, 감도 등에서 이미 상품화된 엑스선 감지기와도 충분히 경쟁할 수 있으며, 따라서 성공적으로 상용화 할 수 있음을 확인했다.

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.230-236
• /
• 2021

Ionic conduction mechanism of Mg-Al layered double hydroxides (LDHs) intercalated with CO₃^2- (Mg-Al CO₃^2- LDH) was studied. The electromotive force for the water vapor concentration cell using Mg-Al CO₃^2- LDH as electrolyte showed water vapor partial pressure dependence and obeyed the Nernst equation, indicating that the hydroxide ion transport number of Mg-Al CO₃^2- LDH is almost unity. The ionic conductivity of Mg(OH)₂, MgCO₃ and Al₂(CO₃)₃ was also examined. Only Al₂(CO₃)₃ showed high hydroxide ion conductivity of the order of 10^-4 S cm^-1 under 80% relative humidity, suggesting that Al₂(CO₃)₃ is an ion conducting material and related to the generation of carrier by interaction with water. To discuss the ionic conduction mechanism, Mg-Al CO₃^2- LDH having deuterium water as interlayer water (Mg-Al CO₃^2- LDH(D₂O)) was prepared. After the adsorbed water molecules on the surface of Mg-Al CO₃^2- LDH(D₂O) were removed by drying, DC polarization test for dried Mg-Al CO₃^2- LDH(D₂O) was examined. The absorbance attributed to O-D-stretching band for Mg-Al CO₃^2- LDH(D₂O) powder at around the positively charged electrode is larger than that before polarization, indicating that the interlayer in Mg-Al CO₃^2- LDH is a hydroxide ion conduction channel.

• 융합정보논문지
• /
• 제8권6호
• /
• pp.43-48
• /
• 2018

완전 수입에 의존하는 ITO를 대체할 수 있는 FTO 필름에 회로를 형성시킬 수 있는 식각액을 제조하였다. 이 식각액은 불화물 1 ~ 30량%, 산 1 ~ 20량%, 계면활성제 0.5 ~ 5 중량%, 용매제 5 ~ 20 량%, 부식억제제 0.5 ~ 10중량%, 나머지는 물로 이루어진다. 이 식각액은 드라이필름을 이용한 식각공정이 가능하여 비용을 절감할 수 있으며, 식각액의 거품발생 및 찌꺼기가 발생하지 않는 특징이 있다. 식각액의 특성은 100nm 두께의 FTO를 2분 만에 식각할 수 있었고 이때 $50^{\circ}C$의 식각액 온도를 유지하였다. 2분 식각액에 넣었을 때 -0.00364%의 언더컷을 얻었다. Cd, Pb, Hg, Cr 성분 등의 환경유해물질은 측정되지 않았다. 희토류가 나지 않는 우리나라에서 FTO를 활용하면 국산화 및 수입대체효과를 이룩할 수 있다.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.251-257
• /
• 2019

Since the ISO decided to deal with rare-earth elements at the $298^{th}$ Technical Committee (TC) in 2015, Korea has participated in four plenary meetings and proposed four standards as of June 2019. The status of ISO TC 298, the standards covered by the TC, and the standardization strategies of Korea are summarized. Korean delegations are actively engaged in WG2, which deals with recycling, proposing four standards for fostering the rare-earth recycling industry. However, the participation of domestic experts is still low compared with the increase in the number of working groups and the number of standards in TC 298. The aim of this article is to summarize the current status of ISO international standards related to rare-earth elements, to encourage relevant experts to participate in standardization, and to develop international standards that accurately reflect the realities of the industry.

• 한국인터넷방송통신학회논문지
• /
• 제18권6호
• /
• pp.69-74
• /
• 2018

본 논문에서는 그물망 접지를 갖는 MCAA(Microstrip Comb Array Antenna)에서 그물망 구조의 변화가 MCAA에 미치는 영향을 조사하였다. 우선, 24GHz ISM 밴드에서 MCAA를 설계한 후 접지의 그물망 구조를 변화시키며 MCAA의 이득과 SLL(Side Lobe Level)의 변화를 조사하였다. 이 조사를 위해 그물망의 크기와 그물망 면적에 대한 도체를 제외한 공백의 면적 비인 공백율의 두 변수를 변화시켰다. MCAA는 방사체가 플랫한 MCAA와 방사체가 테이퍼된 MCAA의 두 가지 구조로 조사하였다. 공백율이 증가함에 따라 플랫한 MCAA와 테이퍼된 MCAA 모두에서 이득이 감소했다. 한편, 그물망 크기의 증가는 공백율 증가보다 안테나 이득을 더욱 극적으로 감소시켰다. 이러한 경향은 안테나 SLL에 대해서도 유사했으나 테이퍼된 MCAA가 플랫한 MCAA보다 그물망 크기 변화에 대한 영향을 좀 더 심하게 받았다.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.53-60
• /
• 2018

In this paper, the effect of different 3D printing parameters including laminated angle and annealing temperature is observed their effect on FDM conductive 3D printing. In FDM 3D printing, a conductive filament is heated quickly, extruded, and then cooled rapidly. FDM 3D Print conductive filament is a poor heat conductor, it heats and cools unevenly causing the rapid heating and cooling to create internal stress. when the printed conductive specimens this internal stress can be increase electrical resistance and decrease electrical conductivity. Therefore, This experiment would like to use annealing to remove internal stress and increase electrical conductivity. The result of experiment when 3D printing conductive specimen be oven cooling of annealing temperature $120^{\circ}C$ electrical resistance appeared decrease than before annealing. So We have found that 3D printing annealing removes internal stresses and increases the electrical conductivity of printed specimens. These results are very useful for making conductive 3D printing electronic circuit, sensor ect...with electrical conductance suitable for the application.

• 한국인터넷방송통신학회논문지
• /
• 제19권5호
• /
• pp.163-168
• /
• 2019

본 논문에서는 그물의 투명도를 0%에서 90.7%까지 증가시켰을 때 투명도 변화가 그물망 SF-MPAA(Series Fed Microstrip Patch Array Antenna)에 미치는 영향을 조사하였다. 이를 위해 그물망 방사패치, 그물망 접지면, 그물망 방사패치 및 접지면의 3가지 경우의 SF-MPAA를 설계하였다. 그리고 각 경우에 그물 투명도를 변화시켜가며 SF-MPAA의 특성을 조사하였다. 방사패치를 그물망으로 구현한 경우 이득이 18.8% 감소하고 동작주파수가 5.5% 낮아졌다. 접지면을 그물망으로 구현한 경우 이득이 15.4% 감소하고 동작주파수가 5.56% 낮아졌다. 방사패치와 접지면을 모두 그물망으로 구현한 경우 이득이 31.94% 감소하고 동작주파수가 7.6% 낮아졌다. 한편, 대역폭과 SLL(Side Lobe Level)은 그물망 투명도 변화에 뚜렷한 경향성을 보이지 않았다.

• Design & Manufacturing
• /
• 제14권4호
• /
• pp.71-77
• /
• 2020

Various manufacturing technologies, including over-molding and insert-injection molding, are used to produce hybrid plastics and metals. However, there are disadvantages to these technologies, as they require several steps in manufacturing and are limited to what can be reasonably achieved within the complexities of part geometry. This study aims to determine a practical approach for producing metal/plastic hybrid components by combining plastic injection molding and metal die casting to create a new hybrid metal/plastic molding process. The integrated metal/plastic hybrid injection molding process developed in this study uses the proven method of multi-component technology as a basis to combine plastic injection molding with metal die casting into one integrated process. In this study, the electrical conductivity and ampacity were verified to qualify the new process for the production of parts used in electronic devices. The electrical conductivity was measured, contacting both sides of the test sample with constant pressure, and the resistivity was measured using a micro ohmmeter. Also, the specific conductivity was subsequently calculated from the resistivity and contact surface of the conductor path. The ampacity defines the maximum amount of current a conductive path can carry before sustaining immediate or progressive deterioration. The manufactured hybrid multi-components were loaded with increasing currents, while the temperature was recorded with an infrared camera. To compare the measured infrared images, an electro-thermal simulation was conducted using commercial CAE software to predict the maximum temperature of the power loaded parts. Overall, during the injection molding process, it was demonstrated that multifunctional parts can be produced for electric and electronic applications.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.161-165
• /
• 2021

In general, SOFCs mainly use Ni-YSZ cermet, a mixture of Ni and YSZ, as an anode material, which is stable in a high-temperature reducing atmosphere. However, when SOFCs have operated at a high temperature for a long time, the structural change of Ni occurs and it results in the problem of reducing durability and efficiency. Accordingly, a development of a new anode material that can replace existing nickel and exhibits similar performance is in progress. In this study, SrTiO₃, which is a perovskite-based mixed conductor and one of the candidate materials, was used. In order to increase the electrical conduction properties, Y_0.08Sr_0.92Fe_0.3Ti_0.7O₃, doped with 0.08 mol of Y³⁺ in Sr-site and 0.03 mol of transition metal Fe³⁺ in Ti-site, was synthesized and its chemical diffusion coefficient and reaction constant were measured. Its electrical conductivity changes were also observed while changing the oxygen partial pressure at a constant temperature. The performance as a candidate electrode material was verified by predicting the defect area through the electrical conductivity pattern according to the oxygen partial pressure.