• Korean Journal of Veterinary Research
• /
• v.26 no.2
• /
• pp.245-249
• /
• 1986

The present study has been carried out to investigate the optimal condition on the blastogenesis of guinea pig lymphocytes. A microculture system in conjunction with a semiautomatic multiple sample harvester(SAMSH) was used to study the in vito optimal condition of guinea pig lymphocytes. Data were presented to show many variables that are Involved in studying the responses of guinea pig lymphocyte in a microculture system to the stimulation of Concanavalin A(Con A) and lipopolysaccharide (LPS). Analysis indicated that the conditions for optimal Con A as measured by incorporation of $^3H$-TdR include : (1) use of RPMI-1640 as culture medium, (2) use of $6{\mu}g$ of Con A, per culture, (3) use of $1{\times}10^6$ cells per culture. Conditions for optimal stimulation with LPS mitogen were similar to those used for Con A.

• Korean Journal of Veterinary Research
• /
• v.31 no.1
• /
• pp.49-53
• /
• 1991

The present study has been carried out to investigate the optimal condition on lymphocyte blastogenesis of rabbit lymphocytes, whole blood culture and microculture system in conjunction with a semiautomatic multiple sample harvester(SAMSH) was used to study the In vitro optimal condition of rabbit lymphocytes. Data were presented to show many variables that are involved in studying the phytohemagglutinin(PHA) and lipopolysaccharide(LPS) response of rabbit lymphocyte in a microculture system. Analysis indicated that the conditions for optimal PHA as measured by incorporation of $^3H$-TdR include: (1) use of RPMI-1640 as culture medium. (2) use of $6{\mu}g$ of PHA, per culture. (3) 48-hours culture period. Conditions for optimal stimulation with LPS mitogen were similar to those used for PHA.

• Applied Microscopy
• /
• v.46 no.3
• /
• pp.164-166
• /
• 2016

Electron channeling contrast imaging (ECCI) is a powerful analyzing tool for identifying lattice defects like dislocations and twin boundaries. By using diffraction-based scanning electron microscopy technique, it enables microstructure analysis, which is comparable to that obtained by transmission electron microscopy that is mostly used in defect analysis. In this report, the optimal conditions for investigating crystal defects are suggested. We could obtain the best ECCI images when both acceleration voltage and probe current are high (30 kV and 20 nA). Also, shortening the working distance (6 mm) enhances the quality of defect imaging.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.58-65
• /
• 2016

This study analyzed the structural weld strength for a door hinge for a field artillery ammunition support vehicle. In order to determine the optimal conditions, we measured the modal analysis and analyzed the leg length of a rear door hinge. From these methods, we acquired the vibration frequency of normal mode and the optimal welding leg length conditions. It was possible to obtain a structural stability for a rear door hinge of the field artillery ammunition support vehicle. In the future, this should be used as a reference source for the weld strength analysis of high vibration and high weight structures for another welding system design.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1348-1356
• /
• 2002

The present work concerns the optimal design for injection molding processes by using the design of experiments (DOE) and numerical analysis. The DOE approaches is planned to be able to consider two-way interaction, and have been applied progressively for both mold design and process design. Numerical analyses have been carried out as a design of experiments for mold parameters such as runner specifications and cooling channel configurations. In order to determine optimal process parameters, experiments have been performed for various process conditions with the DOE scheduling. As a result, the quality and productivity of the product have been improved, and the proposed approach can be successfully reflected on the industrial injection molding process of precision electronics parts.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.432-438
• /
• 2011

This paper describes an analysis of optimal design conditions of multi-mode LDPC(low density parity check) decoder which supports three block lengths (648, 1296, 1944) and four code rates (1/2, 2/3, 3/4, 5/6) for IEEE 802.11n WLAN system. A fixed-point model of LDPC decoder, which adopts min-sum algorithm and layered decoding scheme, is implemented using Matlab. From fixed-point simulation results for various bit-width parameters such as internal bit-width, integer/fractional part bit-widths, optimal design conditions and decoding performance of LDPC decoder are analyzed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.241-244
• /
• 2005

Though the history of finite element analysis in field of powder metallurgy is not short, industrial engineer is still being dependent on the trial and error approach based on engineer's experience in selecting process conditions. This problem is mainly due to the difficulty in establishing models for the behavior of a powder compact during compaction and sintering as well as finding material parameters for the models and the absence of CAE software with which industrial engineer can easily investigate the effect of process conditions on the quality of product. Therefore, we established very simple and cheap procedure to find material parameters for powder compaction behavior and implemented it in self-developed commercial CAE software for powder metallurgy, PMsolver. Basically, the development strategy of PMsolver lies on simplification and convenience so as for industrial engineers to use it with least training. Using PMsolver, optimal process conditions were found for some geometry and powders. Prior to process condition design, the accuracy of finite element analysis was verified.

• Journal of applied mathematics & informatics
• /
• v.40 no.5_6
• /
• pp.857-871
• /
• 2022

In this work, we formulated a mathematical model for divorce in marriage and extended in to an optimal control model. Firstly, we qualitatively established the model positivity and boundedness. Also we saw sensitivity analysis of the model and identified the positive and negative indices parameters. An optimal control model were developed by incorporating three time dependent control strategies (couple relationship education, reducing getting married too young & consulting separators to renew their marriage) on the deterministic model. The Pontryagin's maximum principle were used for the derivation of necessary conditions of the optimal control problem. Finally, with Newton's forward and backward sweep method numerical simulation were performed on optimality system by considering four integrated strategies. So that we reached to a result that using all three strategies simultaneously (the strategy D) is an optimal control in order to effectively control marriage divorce over a specified period of time. From this we conclude that, policymakers and stakeholders should use the indicated control strategy at a time in order to fight against Divorce in a population.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.33-38
• /
• 2022

This study investigates the outlet temperature of coolant heater based on heat and flow volume conditions. Through computer simulation, the coolant temperature at the outlet was analyzed to investigate the heat and flow volume conditions of the coolant heater, and the optimal conditions were derived. Results show that heat and flow volume conditions, it was confirmed that heat condition is 0.424 W/mm³, and flow volume condition is 500 l/h, demonstrates optimal conditions. The results of this study can be utilized to efficiently control the coolant temperature through various heat and flow volume conditions.

• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.656-664
• /
• 2018

The following study was conducted to determine the optimal location in terms of efficiency for solar energy facilities, and to propose a policy implications for the orientation of the installments. 92 cases in Jeollanam-do Province were selected. A regression analysis was performed between the average electricity generation time as the dependent variable, and the facility, weather and site conditions as the independent variables. As a result, 5 variables were deemed significant. Larger site areas, closer proximity to rivers, islands, oceans, etc., least south-oriented, higher average wind speed, and facilities in agricultural land use and natural environment conservation land use had the highest efficiency. This study minimized the possibility of secure databases and errors following facility types, and was limited in the number of sites studied, since this was only conducted in Jeollanam-do Province. Nevertheless, these conclusions still offer important policy implications for determining the most optimal location for solar energy facilities.