Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle

자주포용 탄약 운반 궤도차량 도어힌지 용접부 구조강도 해석

  • Received : 2016.02.22
  • Accepted : 2016.04.04
  • Published : 2016.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study analyzed the structural weld strength for a door hinge for a field artillery ammunition support vehicle. In order to determine the optimal conditions, we measured the modal analysis and analyzed the leg length of a rear door hinge. From these methods, we acquired the vibration frequency of normal mode and the optimal welding leg length conditions. It was possible to obtain a structural stability for a rear door hinge of the field artillery ammunition support vehicle. In the future, this should be used as a reference source for the weld strength analysis of high vibration and high weight structures for another welding system design.

Keywords

References

  1. Cho, J. U. and Han, M. S., "Structural Analysis on Door Hinge of Car", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 2, pp. 33-39, 2010.
  2. Han, M. S. and Cho, J. U., "Study on Structural Analysis of Front Axle", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 5, pp. 65-71, 2011.
  3. Kim, S. K. and Lee, J. W., "Analytical Study on the Structural Strength of an Air Compressor for Main Engine Starting of 22000 TEU Class Container Ships", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 60-67, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.060
  4. Ye, S. D. and Min, B. H., "A Study on the Development of Friction Hinge with Automatic Closed Function", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 1, pp. 107-114, 2014. https://doi.org/10.14775/ksmpe.2014.13.1.107
  5. Jung, J. W, Kim, K. P, Ji, H. C. and Moon, T. S., "Design Improvement of the Driving Bevel Gear in Transmissions of a Tracked Vehicle", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 1-6, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.001
  6. Park, J. K. and Lee S. J., "A Study on the Contour Design in the Hinge Mechanism for a Folder of a Mobile Phone", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 25, No. 9, pp. 86-94, 2008.

Cited by

  1. A Study on the Durability due to Fork Shape of Excavator Bucket vol.17, pp.2, 2018, https://doi.org/10.14775/ksmpe.2018.17.2.054
  2. A Study of Strength Property and Durability on Automotive Front Bumper Guard by Configuration vol.17, pp.3, 2018, https://doi.org/10.14775/ksmpe.2018.17.3.028
  3. Durability Study of Subway Brake Disc and Wheel-type Brake vol.18, pp.7, 2016, https://doi.org/10.14775/ksmpe.2019.18.7.022
  4. Flow Analysis according to the Installation of an Aero Part in a Sports Car vol.19, pp.1, 2016, https://doi.org/10.14775/ksmpe.2020.19.01.036
  5. Durability Analysis due to Design Shape of Pinion Gear vol.19, pp.7, 2016, https://doi.org/10.14775/ksmpe.2020.19.07.016
  6. A Durability Investigation on Automotive Front Bumper Guard vol.19, pp.8, 2016, https://doi.org/10.14775/ksmpe.2020.19.08.001
  7. Durability Analysis of Automotive Seat According to the Shape of Seat Back Frame vol.19, pp.10, 2016, https://doi.org/10.14775/ksmpe.2020.19.10.016