• Title/Summary/Keyword: condition (P)

Search Result 8,742, Processing Time 0.04 seconds

A clean technology development using the iron(Fe) dissolution reaction with hydrogen peroxide (과산화수소를 이용한 철(Fe)선 용해반응에 따른 청정기술 개발에 관한 연구)

  • 김재우
    • Journal of environmental and Sanitary engineering
    • /
    • v.16 no.4
    • /
    • pp.62-68
    • /
    • 2001
  • The advantages of hydrogen peroxide dissolution method were no discharge of noxious matter when dissolution of iron wire which used as the center supporter, reactions occur in room temperature and easy to recover dissolved iron. This study was aimed at gathering the basic data of iron wire dissolution- recovery process and proposes the reaction condition of iron wire dissolution- recovery process rind the factors influencing those reactions. The results were as follows : 1 . Hydrogen peroxide dissolution method used hydrochloric acid as the catalyst. 1. In the dissolution of iron wire(1.668 g), the condition of reaction was E1702(30 ml), HCI(20 ml) and $H_2O$(200 ml) ; time of the reaction was 18 min. P.W.(Piece weight) was 7.75 mg, and C.R. was $2.34{\;}{\Omega}$ 2. In the dissolution of iron wire(1.529 g), the condition of reaction was H7O2(30 ml), HCI(20 ml) and $H_2O$(200 ml), time of the reaction was 21 min., P.W.(Piece weight) was 7.73 mg, and C.R. was $2.35{\;}{\Omega}$. Hydrogen peroxide dissolution method used sulfuric acid as the catalyst. 1. In the dissolution of iron wire(0.834 g), the condition of reaction was $H_2O$(65 ml), $H_2SO_4$(5 ml) and 1702(5 ml) ; time of the reaction was 5 min.30 sec, P.W.(Piece weight) was 7.74 mg, and C.R. was $2.33{\;}{\Omega}$ 2. In the dissolution of iron wire(1.112 g), the condition of reaction was $H_2O$(65 ml), $H_2SO_4$(5 ml) and $H_2O_2$(5 ml) ; time of the reaction was 4 min.30 sec, P.W.(Piece weight) was 7.75 mg, and C.R. was $2.33{\;}{\Omega}$. Hydrogen peroxide dissolution method used hydrochloric acid and sulfuric acid as the catalyst confirmed a clean technology, because there were not occurred a pollutant discharged in the existing method.

  • PDF

Performance of Conductive Gloves When Using Electronic Devices in a Cold Environment - Manual Dexterity, Usability and Thermoregulatory Responses - (겨울철 전자 기기 사용을 위한 전도성 보온장갑의 착용성 평가 - 손의 기민성과 사용성, 체온조절 반응을 중심으로 -)

  • Kwon, JuYoun;Jung, Dahee;Kim, Siyeon;Jeong, Wonyoung;Lee, Joo-Young
    • Fashion & Textile Research Journal
    • /
    • v.22 no.5
    • /
    • pp.686-695
    • /
    • 2020
  • The present study evaluated the manual dexterity and usability of conductive gloves when operating touchscreen devices in the cold. Twelve male subjects (23.3±1.5 years in age) participated in three experimental conditions: no gloves, fabric conductive and lambskin conductive gloves. Manual dexterity was tested using both Purdue Pegboard (PP) and ASTM dexterity tests at an air temperature of 5℃ and air humidity of 30%RH. Glove usability was tested through the following touchscreen tests: tap, double tap, long tab, drag, flick, and multi-touch. The results showed that manual dexterity according to the PP (2.5 mm of a pin diameter) and ASTM tests (8 mm of a stick diameter) was worse for the two glove conditions than for the no glove condition (p<.005). PP dexterity was better for the fabric glove condition than for the lambskin glove condition (p<.05); however, there was no difference in ASTM dexterity between the two glove conditions. Hand and finger skin temperatures were higher for the glove conditions than the bare hand condition (p<.05), with no differences between the two glove conditions. The touchscreen usability was the best for the no glove condition, followed by fabric gloves (p<.05). Wearing either fabric or lambskin gloves diminishes hand dexterity while maintaining hand and finger temperatures at higher levels. For improved hand dexterity in dealing with small numbers, letters on a touchscreen in cold environments, we recommend wearing fabric conductive gloves rather than lambskin conductive gloves.

The Combined Effects of Ginkgo Biloba Extracts and Aspirin on Viability of SK-N-MC, Neuroblastoma Cell Line in Hypoxia and Reperfusion Condition

  • Moon, Sung-Hwan;Lee, Yong-Jik;Park, Soo-Yong;Song, Kwan-Young;Kong, Min-Ho;Kim, Jung-Hee
    • Journal of Korean Neurosurgical Society
    • /
    • v.49 no.1
    • /
    • pp.13-19
    • /
    • 2011
  • Objective: The purpose of this study is to investigate the combined effects of ginkgo biloba extract, ginkgolide A and B and aspirin on SK-N-MC, human neuroblastoma cell viability and mRNA expression of growth associated protein43 (GAP43), Microtubule-associated protein 2 (MAP2), B-cell lymphoma2 (Bcl2) and protein53 (p53) gene in hypoxia and reperfusion condition. Methods: SK-N-MC cells were cultured with Dulbecco's Modified Eagle's Medium (DMEM) media in $37^{\circ}C$, 5% $CO_2$ incubator. The cells were cultured for 8 hours in non-glucose media and hypoxic condition and for 12 hours in normal media and $O_2$ concentration. Cell survival rate was measured with Cell Counting Kit-8 (CCK-8) reagent assay. Reverse transcriptase polymerase chain reaction (RT-PCR) was used to estimate mRNA levels of GAP43, MAP2, Bcl2, and p53 genes. Results: The ginkgolide A and B increased viable cell number decreased in hypoxic and reperfused condition. The co-treatment of ginkgolide B with aspirin also increased the number of viable cells, however, there was no additive effect. Although there was no increase of mRNA expression of GAP43, MAP2, and Bcl2 in SK-N-MC cells with individual treatment of ginkgolide A, B or aspirin in hypoxic and reperfused condition, the co-treatment of ginkgolide A or B with aspirin significantly increased GAP43 and Bcl2 mRNA levels. In MAP2, only the co-treatment of ginkgolide A and aspirin showed increasing effect. The mRNA expression of p53 had no change in all treating conditions. Conclusion: This study suggests that the combined treatments of Ginkgo biloba extracts and aspirin increase the regeneration of neuroblastoma cells injured by hypoxia and reperfusion.

A Study on the Attitude of University Students on Understanding Disabed (대학생의 장애 이해에 대한 태도 연구)

  • Kim, Young-Hee
    • Journal of Korean Physical Therapy Science
    • /
    • v.9 no.1
    • /
    • pp.95-102
    • /
    • 2002
  • The present study focuses on the relation of the attitudes of university students to disabled by using modified disability factor scales(DFS, Siller). As for the attitude areas, it relies on the eight categories DFS provides. The 8 categories that specify each attitude area are: generalized rejection, distressed identification, inferred emotional consequences, imputed functional limitation, authoritarian virtuousness, rejection of intimacy, interaction strain, mainstreaming. This study is based on a series of questionnaire researches conducted on 322 students, over the period from October 19th to November 14th, 2001. The questionnaire carries 50 items, covering the 8 attitude areas and each item has 5 choices. The subjects' responses to each of the areas are examined in their relations to the four conditions, as they are analysed by t-test and one way ANOVA. The conclusion drawn from the research are as follows: 1. There is no significant difference between the students of the department concerned with the problem of disability, and those of the department unconcerned. But the responses are significantly different in the three areas of generalized rejection, rejection of intimacy and interaction strain(1st condition, P<.05). 2. The responses are significantly different in 6 areas except for the two, distressed identification and inferred emotional consequences, between the students who have volunteered services as helpers of the disabled and those who have no such experiences(2nd condition, P<.05). 3. the responses are significantly different between those who have volunteered long-time services and those who are far less experienced(3nd condition, P<.05). 4. There is no significant difference, whether the subjects have disabled persons around them or not. But generalized rejection, authoritarian virtuousness, rejection of intimacy, interaction strain & mainstreming show significant differences(4th condition, P<.05). 5. Generalized rejection, rejection intimacy and interaction strain show significant differences in every pair of the 4 condition. 6. Distressed identification and inferred emotional consequence show no significant difference between the two conditions in every pair of the 4 considerations.

  • PDF

Study on the Effect of Light Emitting Diode Irradiation on Improving Skin Condition (Light Emitting Diode 조사가 피부상태 개선에 미치는 효과 연구)

  • Lee, Jung-Hee;Ha, Sung-Yi;Moon, Ji-Sun
    • Journal of the Korean Applied Science and Technology
    • /
    • v.37 no.6
    • /
    • pp.1798-1805
    • /
    • 2020
  • This study attempted to numerically verify specific effects on skin condition improvement by measuring and comparing changes in skin conditions such as pores, wrinkles, and sebum of LED masks for beauty devices with low output among light sources. 18 healthy women (4 weeks in the control group and 4 weeks in the experimental group) were conducted once a week for 8 weeks. As a result of measuring the skin condition of pores, wrinkles, and sebum, it was confirmed that the skin condition improved significantly as the LED irradiation progressed, and the difference between the groups by measurement period of the experimental group and the control group also showed significant differences in pores, wrinkles, and sebum (p< .001, p<.05). This is meaningful in that it can be presented as clinical information and quantitative data by preparing continuous data in an academic sense by proving the effect of improving the LED mask as a beauty device. It is also suggested that in the future, follow-up studies to prove more effective skin improvement will be conducted.

A Novel System with EMG-controlled FES Enhanced Gait Function and Energy Expenditure for Older Adults

  • Jang-hoon Shin;Hye-Kang Park;Joonyoung Jung;Dong-Woo Lee;Hyung cheol Shin;Hwang-Jae Lee;Wan-hee Lee
    • Physical Therapy Rehabilitation Science
    • /
    • v.13 no.2
    • /
    • pp.152-162
    • /
    • 2024
  • Objective: This study was conducted to analyze the effect of wearable Electromyography-controlled functional electrical stimulation (EMG-controlled FES) System on Gait Function and cardiopulmonary metabolic efficiency during walking in older adults. Design: Cross-section study Methods: Total 22 older adult participants suitable to selection criteria of this study participated in this study. The EMG-controlled FES System, which functions as a wearable physical activity assist FES system was used. All participations performed randomly assigned two conditions (Non-FES assist [NFA], FES assist [FA]) of walking. In all conditions, spatio-temporal parameters and kinematics and kinetics parameters during walking was collected via 3D motion capture system and 6 minutes walking test (6MWT) and metabolic cost during walking and stairs climbing was collected via a portable metabolic device (COSMED K5, COSMED Srl, Roma, Italy). Results: In Spatio-temporal parameters aspects, The EMG-controlled FES system significantly improved gait functions measurements of older adults with sarcopenia at walking in comparison to the NFA condition (P<0.05). Hip, knee and ankle joint range of motion increased at walking in FA condition compared to the NFA condition (P<0.05). In the FA condition, moment and ground reaction force was changed like normal gait during walking of older adults in comparison to the NFA condition (P<0.05). The EMG-controlled FES system significantly reduced net cardiopulmonary metabolic energy cost, net energy expenditure measurement at stairs climbing (P<0.05). Conclusions: This study demonstrated that EMG-controlled FES is a potentially useful gait-assist system for improving gait function by making joint range of motion and moment properly.

EFFECT OF THE BOUNDARY CONDITION OF REDISTANCE EQUATION ON THE LEVEL SET SOLUTION OF SLOSHING PROBLEM (Redistance 방정식의 경계조건이 슬로싱 문제의 level set 해석에 미치는 영향)

  • Choi, H.G.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2009.04a
    • /
    • pp.165-169
    • /
    • 2009
  • The effect of the Dirichlet boundary condition for the redistance equation of level set method on the solutionof sloshing problem is investigated by adopting four Dirichlet boundary conditions. For the solution of the incompressible Navier-Stokes equations, P1P1 four-step fractional finite element method is employed and a least-square finite element method is used for the solutions of the two hyperbolic type equations of level set method; advection and redistance equation. ALE (Arbitrary Lagrangian Eulerian) method is used to deal with a moving computational domain. It has been shown that the free surface motion in a sloshing tank is strongly dependent on the type of the Dirichlet boundary condition and the results of broken dam and sloshing problems using various Dirichlet boundary conditions are discussed and compared with the existing experimental results.

  • PDF

DERIVATIONS ON SEMIPRIME MUTATION ALGEBRAS

  • Jeong, Kwang-Taek
    • Communications of the Korean Mathematical Society
    • /
    • v.14 no.1
    • /
    • pp.69-74
    • /
    • 1999
  • In [2], the author discusses derivations of A(p,q) when A(p,q) is prime and p,q $\in$ A satisfy the condition A=Ap+Aq+R where R is a subspace of Z(A). In this paper, we consider a general-ization of Theorem 1 in [2] for the semiprime case of A(p,q).

  • PDF

Problem Analysis of the Experiments Illustrating pH Effects on Enzyme Activities in High School Science Textbooks - Focus on Starch-Iodine Reaction - (고등학교 과학 교과서에서 "pH가 효소의 작용에 미치는 영향" 실험의 문제점 분석 -녹말과 요오드 반응을 중심으로-)

  • Ji, Jae-Hwa;Jeong, Dae-Hong
    • Journal of The Korean Association For Science Education
    • /
    • v.29 no.8
    • /
    • pp.923-933
    • /
    • 2009
  • In this study, analysis was carried out on science experiment in high school textbooks, illustrating 'the effect of pH on enzyme activity.' Five of the total 16 science textbooks introduced in this experiment, and the experimental conditions therein were analyzed. Textbook analysis revealed that pH of below 3 was used for 'acidic condition' and that of over 11 was used for 'basic' condition. Using the experimental conditions described in the textbooks, review experiments were performed. Buffering effect with the addition of saliva was found in the pH region around 7 when buffer solution was not used to control pH as was in the textbooks. The enzyme activity experiments were performed controlling pH from pH 2 to 13 with buffer. The color of the sample was blue from pH 2 to 4, and then disappeared from pH 5 to 8, reflecting that starch was digested owing to enzyme activity. In pH 9 light blue color appeared, indicating de-activation of enzyme under this basic condition. However, the blue color of the sample became lighter at pH 10 and disappeared from pH 11, which was different from the expected behavior anticipating dark blue color due to de-activation of enzyme under strong basic condition. These results can wrongly influence students to interpret that enzyme can be activated in this pH condition. So, we analyzed the reason for the color of the sample turning light blue in pH 10 and disappeared from pH 11. The analysis resulted that ${I_3}^-$ and/or ${I_5}^-$ subunits of polyiodides within the starch helix in starch-iodine complex, showing blue, decreases above pH 10 due to disproportionation to HOI, ${IO_3}^-$, and $I^-$ by the reaction with $OH^-$.

Effect of Electrolysis Condition on Mechanical Property of Ni Electrodeposits (니켈 도금층의 기계적 성질에 미치는 전해조건의 영향)

  • Kang, Soo Young;Lee, Jeong Ja;Yang, Seung Gi;Hwang, Woon Suk
    • Journal of Surface Science and Engineering
    • /
    • v.48 no.2
    • /
    • pp.62-67
    • /
    • 2015
  • Nickel is a commercially important and versatile element in electroplating. The applications of nickel electroplating fall into three main categories: decorative, functional and electroforming. In decorative applications, electroplated nickel is most often applied in combination with electrodeposited chromium. Nickel is deposited on surfaces to improve corrosion and wear resistance or modify magnetic and other properties. Electroforming is electroplating applied to the fabrication of products of various kinds. Nickel is deposited onto a substrate and then removed from it to create a part made entirely of nickel. In this study, mechanical property of Ni electrodeposits in various manufacturing condition such as temperature, current density, pH and electrolyte content, was investigated to understand effect of electrolysis condition on mechanical property. Vickers hardness increased as the temperature and pH increased and current density and electrolyte content decreased and pH increased. The results were explained by cathode overvoltage and hydrogen evolution.