• Wind and Structures
• /
• v.31 no.2
• /
• pp.103-142
• /
• 2020

One of the next frontiers in structural wind engineering is the design of tall buildings using performance-based approaches. Currently, tall buildings are being designed using provisions in the building codes and standards to meet an acceptable level of public safety and serviceability. However, recent studies in wind and earthquake engineering have highlighted the conceptual and practical limitations of the code-oriented design methods. Performance-based wind design (PBWD) is the logical extension of the current wind design approaches to overcome these limitations. Towards the development of PBWD, in this paper, we systematically review the advances made in this field, highlight the research gaps, and provide a basis for future research. Initially, the anatomy of the Wind Loading Chain is presented, in which emphasis was given to the early works of Alan G. Davenport. Next, the current state of practice to design tall buildings for wind load is presented, and its limitations are highlighted. Following this, we critically review the state of development of PBWD. Our review on PBWD covers the existing design frameworks and studies conducted on the nonlinear response of structures under wind loads. Thereafter, to provide a basis for future research, the nonlinear response of simple yielding systems under long-duration turbulent wind loads is studied in two phases. The first phase investigates the issue of damage accumulation in conventional structural systems characterized by elastic-plastic, bilinear, pinching, degrading, and deteriorating hysteretic models. The second phase introduces methods to develop new performance objectives for PBWD based on joint peak and residual deformation demands. In this context, the utility of multi-variate demand modeling using copulas and kernel density estimation techniques is presented. This paper also presents joined fragility curves based on the results of incremental dynamic analysis. Subsequently, the efficiency of tuned mass dampers and self-centering systems in controlling the accumulation of damage in wind-excited structural systems are investigated. The role and the need for explicit modeling of uncertainties in PBWD are also discussed with a case study example. Lastly, two unified PBWD frameworks are proposed by adapting and revisiting the Wind Loading Chain. This paper concludes with a summary and a proposal for future research.

• Journal of Digital Convergence
• /
• v.16 no.2
• /
• pp.361-366
• /
• 2018

The purpose of this study is to examine the four aspects of design terminology : dictionary, legal, academic, and popular according to the changes of various media and the stream of times and to establish a basic framework for design terms that can be refined in time. Based on an understanding of the essential meaning of design terms, it provides the basis for establishing the basic direction of the use of design terms that can be used between the design industry and other industries. The research methods are as follows: First, the preliminary meaning of design terms was examined through previous studies. Second, the present state of use of design terms was analyzed using the Internet and various network media. Third, through interviews with experts in each design field, the criteria of contemporary design terms was explored. Ultimately, the direction to establish design terms was derived through these research processes. The result of this study is meaningful to provide the new index of the time and conceptual change of design terms. In the future, it will be necessary to expand the research on design common terms continuously in design-related academia and related industries, and try to establish professional and popular design terms through diverse opinions.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.1-26
• /
• 2013

This study inquired following research questions by a narrative research method : What was the job of an engineer in mechanical design field? How did he fulfill his job-related learning in his workplace? What were the context and the characteristic of the job-related learning in the workplace? And some implications of the job-related learning on engineering education were discussed. We identified that the research participant's career as a mechanical engineer has developed through three stages. At first, he engaged on conceptual design of a semi-conductor test machine through self-initiated learning from basic to whole system of the machine. At second stage, he leaded a design group for the concrete design of a ball type semi-conductor test machine. In this stage he learned the meaning of cooperation and cooperative learning. At third stage, he initiated to found an entrepreneur company that was specified to design a semi-conductor test machine. He became CEO of the company. He learned the R & D policy making through contacts with global company, visiting exhibition in abroad. Eventually his main task as a mechanical engineer was the problem solving in the process of machine design. He had experienced and learned through his works : project management, independent fulfilling of tasks, functional analysis and reverse engineering, conceptualizing and test, cohesive cooperation, dialogue and discussion, mediation of conflict, human relationship, leadership. The implication of the narrative analysis on engineering education is, proposed, to give the students more chances to experience and to learn such activities.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.1-11
• /
• 2016

There has been an increasingly high interest in gardens and garden design in Korea recently. However, the usage of the term 'garden' is extremely varied and complex, and there has been very little academic research made on the meaning of garden. Therefore, this research attempts to investigate the ideas of current gardens and to elucidate their changing patterns by means of extensive literature research and big data analysis. The notion of garden in the past was broad including not only private space such as Madang(마당) and Teul(뜰), but also even field and grass land as public outdoor space. Yet, the meaning has become smaller to merely private space due to the change of dwelling systems due to high industrial development of the 20th century. Furthermore, the introduction of urban parks as an interactive space between nature and humans, the similar spatial function of gardens, has blurred the boundary between garden and park, which created confusion in understanding the concept of a garden. After all, garden is a subject for humans. The meanings of garden need to be recognized from various points of view since garden itself is a creation by the sum of diverse fields such as natural and social sciences as well as culturology. This discussion on the meaning of garden in the present day will give a conceptual foundation for future research on gardens and garden design. Also, the big data analysis employed here as a research method can help other similar research topics, particularly semantics in landscape architecture.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.163-182
• /
• 1997

The purpose of this study was intended to analyze artistic formativeness represented in the modern fashion design materials. Nowadays the modern fashion design materials is characterized by variety. The fashion materials the most important of fashion is called a softwear in textile industry and emerged as a new field. Fashion design also escaped from the tra-ditional restraint and extended to pursue lib-eral clothes and the designer's creative inten-tion has resulted in conceptual and conven-tional alteration as a new mode of plastic ex-preseeion. As a results of analysis of the formative fea-ture of Art style represented in the modern fashion design materials. First Surrealism had been searching for a new way of confronting a social and rtistic environment that was stifling and repugnant to them. Accordingly the wide applicaytion of the various object due to the thought of Sur-realism through the modern fashion materials brought the diversification and individua-lization of the modern fashion design. Second Pop Art that is made modern mech-anic culture and commercialism brought the great transformation in the history of Art out of the existing style and the sense of ex-pression. And the plastic characteristics of Pop Art that has a gravity as modern fashion materials on a them of the elements of popular consumer's society. That is the common and cheap objects were introduced into fashion materials itself or pat-tern. Third Minimalism is a trend in art att-empting to seek essence of the object by presenting simple and disciplined expressions by minimal formative means. The features of external form are simplicity clarity unrelated composition and symmetrical structure. Mini-malism was a quest for basic elements repre-senting the fundamental esthetic values of art. The minimal expression in modern fashion materials mean fabrics with simple surface and is contained using simple geometric pattern or utilizing textiles without any patterns. Fourth Eroticism is a kind of psychological revolution in the development of human civilization and is deeply rooted in the cultural tradition of myth religion customs and art. So Eroticism must be distinguished from a mere animal reproduction. These erotic char-acteristics were holded the meanings of sexu-ality through the modern fashion materials. Especially it was expressed the sexual part of body was nakedly showed through trans-parent materials or semitransparent like metalic and opaque materials. Recently the various kinds of new materials such as paper vinyle plastic metal as well as human body were applied to new fashion de-sign. First of all the new materials will give modern fashion designers stimuli and inspi-ration. It can also express values of moderners to despise materialism and uniformed modern society and to recover humanity and self-actualization.

• Korean Journal of Ecology and Environment
• /
• v.53 no.1
• /
• pp.1-10
• /
• 2020

The Stream/River Ecosystem Survey and Health Assessment has been carried out regarding the ecological health of the streams by the Ministry of Environment (MOE), South Korea. However, the sources of impairment of the stream ecosystem and the interactions between the sources, stressors, and the responses of impaired streams have not been taken into consideration. The purpose of this study is to propose the establishment of diagnosis systems for the impaired stream ecosystem because of the need to incorporate the same in the making of the policy to enable the recovery and improvement of the health of the impaired streams or river ecosystem. First, we define the concept of a diagnosis of the impaired stream or river ecosystem through a literature review. Second, through case studies [e.g., US CADDIS (Causal Analysis/Diagnosis Decision Information System), AUS. Eco Evidence, EU WFD (Water Framework Directive)], we try to develop the diagnosis system for the making of policy. In this study, the diagnosis system that is proposed consists of eight steps including the basic data collection, detecting or suspecting impairment, defining the impaired stream reach, identifying the biological impaired cases and listing the candidate causes, illustrating the interactive conceptual diagrams between stressors and responses, investigating the stressors-responses in the field, verifying causes and identifying the probable causes of the impaired cases, and summarizing and proposing the restoration of the streams. The results of this study will support and enable efficient decision-making for sustainable stream restoration and management based on the diagnosis of the probable causes for the impaired complex and the diverse stream ecosystem.

• Journal of Gifted/Talented Education
• /
• v.22 no.3
• /
• pp.639-662
• /
• 2012

The purpose of this study is to develop the evaluation model of gifted curriculum in visual art. For this purpose, first, it discusses about what kinds of issues raised about gifted education in visual art. Second, it critically reviews the evaluation models of gifted curriculum, and investigates the suitable model for developing curriculum evaluation model of gifted in visual art. Third, it suggests the appropriate perspective and evaluation model of gifted curriculum in visual art. Along with the change in the concept of creativity, recent studies on gifted education in visual art concentrate that gifted learners who have the potential find their own way of creating art. Also they emphasize the contextual implementation which recognizes the significance of interaction among field, domain and individual. Based of these inquiry, existing evaluation models of gifted curriculum have limitations in suitability as a evaluation model of gifted curriculum in visual art. This study suggests that the curriculum evaluation of visual art gifted programs should be approached from the decision-making perspective. Also it develops the conceptual framework and the evaluation model of gifted curriculum in visual art based on the CIPP model, which is the representative model of decision-making approach. It concludes with its implications and the discussion about the role of evaluators.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.4
• /
• pp.108-114
• /
• 1980

A deterministic conceptual erosion model which simulates detachment, entrainment, transport and deposition of eroded soil particles by rainfall impact and flowing water is presented. Both upland and channel phases of sediment yield are incorporated into the erosion model. The algorithms for the soil erosion and sedimentation processes including land and crop management effects are taken from the literature and then solved using a digital computer. The erosion model is used in conjunction with the modified Kentucky Watershed Model which simulates the hydrologic characteristics from watershed data. The two models are linked together by using the appropriate computer code. Calibrations for both the watershed and erosion model parameters are made by comparing the simulated results with actual field measurements in the Four Mile Creek watershed near Traer, Iowa using 1976 and 1977 water year data. Two water years, 1970 and 1978 are used as test years for model verification. There is good agreement between the mean daily simulated and recorded streamflow and between the simulated and recorded suspended sediment load except few partial differences. The following conclusions were drawn from the results after testing the watershed and erosion model. 1. The watershed and erosion model is a deterministic lumped parameter model, and is capable of simulating the daily mean streamflow and suspended sediment load within a 20 percent error, when the correct watershed and erosion parameters are supplied. 2. It is found that soil erosion is sensitive to errors in simulation of occurrence and intensity of precipitation and of overland flow. Therefore, representative precipitation data and a watershed model which provides an accurate simulation of soil moisture and resulting overland flow are essential for the accurate simulation of soil erosion and subsequent sediment transport prediction. 3. Erroneous prediction of snowmelt in terms of time and magnitute in conjunction with The frozen ground could be the reason for the poor simulation of streamflow as well as sediment yield in the snowmelt period. More elaborate and accurate snowmelt submodels will greatly improve accuracy. 4. Poor simulation results can be attributed to deficiencies in erosion model and to errors in the observed data such as the recorded daily streamflow and the sediment concentration. 5. Crop management and tillage operations are two major factors that have a great effect on soil erosion simulation. The erosion model attempts to evaluate the impact of crop management and tillage effects on sediment production. These effects on sediment yield appear to be somewhat equivalent to the effect of overland flow. 6. Application and testing of the watershed and erosion model on watersheds in a variety of regions with different soils and meteorological characteristics may be recommended to verify its general applicability and to detact the deficiencies of the model. Futhermore, by further modification and expansion with additional data, the watershed and erosion model developed through this study can be used as a planning tool for watershed management and for solving agricultural non-point pollution problems.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.24-38
• /
• 2017

The awareness and demand for technological elements in the field of cloud computing and their application models have increased. Cloud-based service information systems are being expanded for use in many applications. Advancements in information technology are directly related to spatial information. PaaS is an important platform for implementing a substantial cloud ecosystem to develop geo-based application services. For this reason, it is necessary to analyze the PaaS cloud technology prior to the development of SaaS. The PaaS cloud supports sharing of related extensions, database operations and management, and application development and deployment. The development of geo-spatial information systems or services based on PaaS in ranging the domestic and overseas range is in the initial stages of both research and application. In this study, state-of-the-art cloud computing is reviewed and a conceptual design for geo-based applications is presented. The proposed model is based on container methods, which are the core elements of PaaS cloud technology based on open source. It is thought that these technologies contribute to the applicability and scalability of the geo-spatial information industry that addresses cloud computing. It is expected that the results of this study will provide a technological base for practical service implementation and experimentation for geo-based applications.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.123-129
• /
• 2012

Recently, interests on cleaning robots workable in pipes (termed as in-pipe cleaning robot) are increasing because Garbage Automatic Collection Facilities (i.e, GACF) are widely being installed in Seoul metropolitan area of Korea. So far research on in-pipe robot has been focused on inspection rather than cleaning. In GACF, when garbage is moving, the impurities which are stuck to the inner face of the pipe are removed (diameter: 300 mm or 400 mm). Thus, in this paper, by using TRIZ (Inventive Theory of Problem Solving in Russian abbreviation), an in-pipe cleaning robot of GACF with the 6-link sliding mechanism will be proposed, which can be adjusted to fit into the inner face of pipe using pneumatic pressure(not spring). The proposed in-pipe cleaning robot for GACF can have forward/backward movement itself as well as rotation of brush in cleaning. The robot body should have the limited size suitable for the smaller pipe with diameter of 300 mm. In addition, for the pipe with diameter of 400 mm, the links of robot should stretch to fit into the diameter of the pipe by using the sliding mechanism. Based on the conceptual design using TRIZ, we will set up the initial design of the robot in collaboration with a field engineer of Robot Valley, Inc. in Korea. For the optimal design of in-pipe cleaning robot, the maximum impulsive force of collision between the robot and the inner face of pipe is simulated by using RecurDyn(R) when the link of sliding mechanism is stretched to fit into the 400 mm diameter of the pipe. The stresses exerted on the 6 links of sliding mechanism by the maximum impulsive force will be simulated by using ANSYS$^{(R)}$ Workbench based on the Design Of Experiment(in short DOE). Finally the optimal dimensions including thicknesses of 4 links will be decided in order to have the best safety factor as 2 in this paper as well as having the minimum mass of 4 links. It will be verified that the optimal design of 4 links has the best safety factor close to 2 as well as having the minimum mass of 4 links, compared with the initial design performed by the expert of Robot Valley, Inc. In addition, the prototype of in-pipe cleaning robot will be stated with further research.