• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.4
• /
• pp.616-624
• /
• 2018

In this study, a previous DNPH (2,4-dinitrophenylhydrazine) coupled with high performance liquid chromatography (HPLC) method to measure the concentration of formaldehyde in ambient and source environments has been improved. To improve the disadvantage of the previous HPLC method, an appropriate composition ratio of mobile phase (water: acetonitrile (ACN)) was determined and an isocratic analysis was conducted. Furthermore, limit of detection (LOD), limit of quantitation(LOQ), accuracy, and precision were investigated to verify the reliability of the analytical conditions determined. Finally, samples of exhaust gases from five different industrial facilities were applied to HPLC analytial method proposed to determine their formaldehyde concentrations. The appropriate composition ratio of the mobile phase under the isocratic condition was a mixture of water(40%) and ACN(60%). As the volume fraction of the organic solvent ACN increases, retention time of the formaldehyde peak was reduced. Detection time of formaldehyde peak determined using the proposed isocratic method was reduced from 7 minutes(previous HPLC method) to approximately 3 minutes. LOD, LOQ, accuracy, and precision of the formaldehyde determined using standard solutions were 0.787 ppm, 2.507 ppm, 93.1%, and 0.33%, respectively, all of which are within their recommended ranges. Average concentrations of the formaldehyde in five exhaust gases ranged from 0.054 ppm to 1.159 ppm. The lowest concentration (0.054 ppm) was found at samples from waste gas incinerator in a bisphenol-A manufacturing plant. The highest was observed at samples from the absorption process in manufacturing facilities of chemicals including formaldehyde and hexamine. The analytical time of the formaldehyde in ambient air can be shortened by using the isocratic analytical method under appropriate mobile phase conditions.

• Journal of Oral Medicine and Pain
• /
• v.18 no.1
• /
• pp.97-105
• /
• 1993

In order to evaluate the effectiveness of tooth brushing, mouth gargling and gum chewing in reducing halitosis, 84 individuals ranging in age from 22 59 28 years old were examined. These individuals had no gross oral abnormalities, other than mild gingival inflammation, dental caries, nasopharyngeal disorder, or systemic diseases that were associated with halitosis. They were divided into a tooth brushing group, a mouth garging group, a gum chewing group and a control group that did not use any halitosis removing method. Each of the groups included 21 persons, B.B. Checker (Tokuyama Soda Col, LTDl, Japan) was used to measure the concentrations of intraoral volatile methyl mercaptan of each group. The concentrations of intraoral volatile methyl mercaptan were measured before and after lunch, and after removing halitosis by toothe brushing, mouth gargling and gum chewing. The obtained results were as follows : 1. The average concentration of intraoral volatile methyl mercaptan before lunch was 1.79ppm and after lunch it was 2.02ppm, an increase of 12.9%. 2. In the tooth brushing group the average concentration of intraoral volatile methyl mercaptan was 0.61ppm, in the mouth gargling group it was 1.15ppm, in the gum chewing group it was 1.64ppm and in the control group it was 1.92ppm. It decreased 69.5% in the tooth brushing group, 43.8% in the mouth gargling group, 18.4% in the gum chewing group and 5.4% in the control grop (p<0.05). 3. There were significant differences between the tooth brushing and control group, tooth brushing and gum chewing group and between mouth gargling and control group in concentrations of intraoral volatile methyl mercaptan after using the halitosis removing methods (p<0.05). According to the above results, tooth brushig and mouth gargling are effective ways to reduce halitosis.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.625-630
• /
• 2018

The electrostatic interactions were investigated between the zirconia and the 11-Mercaptoundecylphosphoric-acid layer formed on gold surfaces for their complex structures. For the investigation, the atomic force microscope was used to measure the surface forces between the surfaces as a function of the salt concentration and pH value. The forces were analyzed with the Derjaguin-Landau-Verwey-Overbeek theory to estimate the potential and charge density of the surfaces for each condition. The concentration dependence of the surface properties, found from the measurement at pH 4 and 8, was consistent with the prediction from the law of mass action. The pH dependence was explained with the ionizable groups on the surface. It was found that the 11-Mercaptoundecylphosphoric-acid layer had higher values for the surface charge densities and potentials than the zirconia surfaces at pH 4 and 8, which may be attributed to the ionized-functional-groups of the layer.

• Nuclear Engineering and Technology
• /
• v.21 no.2
• /
• pp.99-110
• /
• 1989

The optimal control of xenon concentration in a nuclear reactor is posed as a linear quadratic regulator problem with state feedback control. Since it is not possible to measure the state variables such as xenon and iodine concentrations directly, implementation of the optimal state feedback control law requires estimation of the unmeasurable state variables. The estimation method used is based on the Luenberger observer. The set of the reactor kinetics equations is a stiff system. This singularly perturbed system arises from the interaction of slow dynamic modes (iodine and xenon concentrations) and fast dynamic modes (neutron flux, fuel and coolant temperatures). The singular perturbation technique is used to overcome this stiffness problem. The observer-based controller of the original system is effected by separate design of the observer and controller of the reduced subsystem and the fast subsystem. In particular, since in the reactor kinetics control problem analyzed in the study the fast mode dies out quickly, we need only design the observer for the reduced slow subsystem. The results of the test problems demonstrated that the state feedback control of the xenon oscillation can be accomplished efficiently and without sacrificing accuracy by using the observer combined with the singular perturbation method.

• Tuberculosis and Respiratory Diseases
• /
• v.67 no.5
• /
• pp.402-408
• /
• 2009

Background: Pre-B-cell colony enhancing factor (PBEF) has been suggested as a novel biomarker in sepsis and acute lung injury. We measured the PBEF in bronchoalveolar lavage (BAL) fluid of acute critically ill patients with lung infiltrates in order to evaluate the clinical utility of measuring PBEF in BAL fluid. Methods: BAL fluid was collected by bronchoscope from 185 adult patients with lung infiltrates. An enzyme-linked immunosorbent assay was then performed on the collected fluids to measure the PBEF. Results: Mean patient age was 59.9 ${\pm}$14.5 years and 63.8% of patients were males. The mean concentration of PBEF in BAL fluid was 17.5 ${\pm}$88.3 ng/mL, and patients with more than 9 ng/mL of PBEF concentration (n=26, 14.1%) had higher Acute Physiology and Chronic Health Evaluation (APACHE) II and Sequential Organ Failure Assessment (SOFA) scores on the BAL exam day. However, there were no significant differences in clinical characteristics between survivors and non-survivors. In patients with leukocytosis (n=93) seen on the BAL exam day, the linear regression analysis revealed a significant, positive relationship between PBEF and APACHE II ($r^2$=0.06), SOFA score ($r^2$=0.08), Clinical Pulmonary Infection Score ($r^2$=0.05), and plateau pressure in patients on ventilators ($r^2$=0.07) (p<0.05, respectively). In addition, multivariate regression analysis with PBEF as a dependent variable showed that the plateau pressure ($r^2$=0.177, p<0.05) was correlated positively with PBEF. Conclusion: The PBEF level in the BAL fluid may be a useful, new biomarker for predicting the severity of illness and ventilator-induced lung injury in critically ill patients with lung infiltates and leukocytosis.

• Journal of Sensor Science and Technology
• /
• v.8 no.3
• /
• pp.247-252
• /
• 1999

The oxygen electrode of a biosensor needs enzyme immobilized membrane and a dialysis membrane to measure the oxygen concentration that remains after an enzyme reacts with its substrate. Accodingly, a single-layer PVA laminated CTA/PCL membrane was developed as an oxygen biosensor electrode. The enzymes were immobilized on a cellulose triacetate/polycarprolactone membrane using the 1,1'-carbonyl diimidazole(CDI) method, and then laminated with polyvinyl alcohol, aldehyde and acid. The alcohol oxidase and PVA laminated CTA/PCL membrane was tested with various concentration of enzyme substrates using a Yellow Springs Instrument(YSI) oxygen sensor. Under 5-10mmol substrates produced $0.37{\sim}0.83{\mu}A$(r=0.995) currents, and ater 8 weeks the glucose oxidase activity remained at about 56%, while the other activities remained very low. A SEM indicated a smooth surface and tightly attached PVA on the enzyme-immobilized CTA/PCL membranes.

• Korean Journal of Community Nutrition
• /
• v.5 no.2
• /
• pp.289-296
• /
• 2000

The purpose of this study was to investigate the relationship and lipids in healthy adults on self-selected diets. These subjects consisted of 40 female college students residing in Chungnam. Anthropometric measure-ments, diet intake measurements, and blood collection were conducted. Serum concentrations of 5 microminerals(As, Cr, Mn, Se, Ni), lipids(triglyceride, total cholesterol, HDL-cholesterol), and glucose were measured by an ICP spectrometer and biochemical analyzer. The results were as follows. The mean age of the subjects was 22.34 years and the mean weight, height, and BMI were 52.89kg, 161.29cm and 20.34, respectively. The mean serum concentrations appeared to be 14.60ug/dl(As), 1.87ug/dl(Cr), 0.18ug/dl(Mn), 23.50ug/dl(Se), 0.21ug/dl(Ni), 60.73mg/dl(triglyceride), 138.49mg/dl(total cholesterol), 65.95mg/dl(HDL-cholesterol), 60.39mg/dl(LDL-cholesterol) and 88.82mg/dl(glucose). When analyzed by Pearson’s correlation coefficient, the serum concentration of Cr was negatively correlated with Ca and vitamin B12 intake(p〈0.05, p〈0.05) respectively, Mn was negatively correlated with Na intake(p〈0.05), Ni, however, was positively correlated with K intake(p〈0.05). The serum concentration of Se was positively correlated with LDL-cholesterol(p〈0.05), Ni, however, negatively correlated with total cholesterol, HDL-cholesterol, LDL-cholesterol, and glucose, respectively(p〈0.001, p〈0.01, p〈0.05). Further studies are needed to clarify the precise micromineral intakes, nutritional assessment of microminerals, and cause-effect relation of microminerals and serum lipids.

• Restorative Dentistry and Endodontics
• /
• v.17 no.1
• /
• pp.83-94
• /
• 1992

This study was executed to measure the biosynthesis of arachidonic acid metabolic products in chronic periapical lesions, to compare the products among periapical granuloma, periapical cyst and chronic periapical abscess, and to understand the pathogensis of chronic periapical lesions. Tissues from 33 chronic periapical lesions of human teeth were enucleated during endodontic surgery. large part of each tissue was contained in liquid nitrogen immediately and the other was examined histologically. In histologically diagnosed 8 cases of periapical granuloma, 9 cases of periapical cyst and 8 cases of chronic periapical abscess. the tissues were homogenatecl and incubated with $_{14}C$-arachidonic acid. Lipid solvent extracts were separated by thin layer chromatography to be analyzed by autoradiography and TLC analyzer. 1. $TXB_2$, 6-keto-$PGF_1{\alpha}$ and $PGE_2$, $LTB_4$, HETEs, and unidentified product which are metabolic products of arachidonic acid were measured in the tissues of chronic peripaical lesions. 2. In all of periapical granuloma, cyst and abscess, the conversion rate of HETEs among all products was the highest(P<0.05), and the percentage of HETEs in total converted products was also the highest(P<0.05). 3. The concentration of each arachidonic acid product was higher in chronic periapical absecss than in periapical granuloma and cyst(P<0.05). The concentration of $TXB_2$ and HETEs in periapical cyst were hight than in periapical granuloma. 4. The relative amounts of total products from lipoxygenase pathway to those from cyclo-oxygenase pathway were about 7 fold in chronic periapical lesions. There was no difference among periapical granuloma, cyst and abscess(P<0.05). The total amount of products from each pathway were higher in chronic periapical abscess than in periapical cyst and granuloma.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.3
• /
• pp.73-77
• /
• 2000

Single crystal and polycrystalline Si thin films were doped with phosphorus by a 2-zone diffusion method to develop the low-resistivity polycrystalline Si electrode for a hemispherical grain. Solid phosphorus source was used in order to achieve uniformly and highly doped surface region of polycrystalline Si films having rough surface morphology. In case of 2-zone diffusion method, it is proved that the heavy doping near the surface area can be achieved even at a relatively low temperature. SIMS analysis revealed that phosphorus doping concentration in case of using solid P as a doping source was about 50 times as that of phosphine source at 750$^{\circ}C$. Also, ASR analysis revealed that the carrier concentration was about 50 times as that of phosphine. In order to evaluate the electrical characteristics of doped polycrystalline Si films for semiconductor devices, MOS capacitors were fabricated to measure capacitance of polycrystalline Si films. In ${\pm}$2 V measuring condition, Si films, doped with solid source, have 8% higher $C_{min}$ than that of unadditional doped Si films and 3% higher $C_{min}$ than that of Si films doped with $PH_3$ source. The leakage current of these films was a few fA/${\mu}m^2$. As a result, a 2-zone diffusion method is suggested as an effective method to achieve highly doped polycrystalline Si films even at low temperature.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.59-69
• /
• 2013

The numerical simulations were performed to analyze the advection-diffusion processes of dredging-induced turbidity plume using RMA2 and RMA4 models in Bunam reservoir, Seosan, Chungnam. Field survey was also performed to measure the turbidity using the multi water quality monitoring system (YSI6600EDS). In the field survey, the vertical and horizontal distributions of the turbidity were measured during the dredging operation in Bunam reservoir. RMA2 model was used to simulate the velocity distributions in both the whole domain and the 2nd part of Bunam reservoir. RMA4 model was also used to simulate the concentration distribution in only the 2nd part of Bunam reservoir, where the dredging work were conducted. The comparison of the simulation results with the field data for the advection-diffusion of the turbidity plume using the concentration ratio concepts shows that the numerical model can be applied to analyze the environmental impact of dredging works.