• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.798-801
• /
• 2004

Silver nitrate colored method that measure easily penetration depth of chloride ion has been used, recently. But, characteristics of silver nitrate colored method hasn't examined well. Therefore, we are aim to examine characteristics of colored method. According to experiment results, when the colored method was applied in concrete, it is reasonable that $AgNO_3$ solution more than 0.05N concentration was sprayed. Chloride concentration difference in colored parts was about 20ppm when $AgNO_3$ of two concentration (0.05N, 0.1N) in concrete was sprayed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.6
• /
• pp.1-8
• /
• 2000

A new method of knock detection in SI engines, using a change of ion concentration in the combustion chamber, was developed. In order to measure in-cylinder ionization current, ionization probes were installed at spark plug and cylinder head of production engine. It was found that the electric current generated by ionized gas in core burned gas region of knocking cycle is between 2 and 10 times larger than that of normal cycle, because the burned gas temperature which is the dominant parameter of a change of ion concentration increases. However, a change of ionization current in boundary region of burned gas is relatively weak. Hence a change of ion concentration in core burned gas region can be used for knock detection.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.344-352
• /
• 1993

The purpose of this study is to investigate the possibility of the non-destructive quality evaluation for food by the acoustic non-linear parameter B/A which is a measure of the non-linearity of the state equation of the medium in terms of pressure and density. The B/A of water, corn oil O/W(oil in water) emulsion and milk were measured by using a sound velocity measuring system. The B/A value of water was measured for ascertaining reliability of our experimental system. Corn oil W/W emulsion was prepared as a model of milk . It was proved that the B/A value of O/W emulsion was related to the oil concentration by a law of mixture. We applied this result to milk and obtained satisfactory results for predicting the milk fat concentration.

• 한국연소학회:학술대회논문집
• /
• 2001.06a
• /
• pp.133-138
• /
• 2001

In this study, quantitative nitric oxide concentration distributions are investigated in the laminar nonpremixed $H_2/N_2$ flames by laser-induced fluorescence (LIF). The measurements are taken in flames for different $N_2$ dilution ratios varying from 20${\sim}$80%, and fuel now rate is fixed as lslpm. The NO A-X (0,0) vibrational band around 226 nm is excited using a XeCl excimer-pumped dye laser. We applied same excitation line used in $CH_4$ premixed flame. Overall, NO concentration was rapidly decreased with $N_2$ addition and we could not measure the concentration any longer for $N_2$ dilution above 80%.

• Korean Journal of Veterinary Service
• /
• v.24 no.4
• /
• pp.353-358
• /
• 2001

Sorbic acid is one of preservatives that is mostly used in general food. This study was carried out to measure the amount of the sorbic acid in cooked meat produced from meat processing plants in Gyeongbuk province. One hundred and fifty-three samples of cooked meat(42 spices added meats, 56 grinding cooked meats, 2 bacons, 5 jerked meats, 18 sausages, 30 hams) were collected from meat processing plants and analyzed for the concentration of preservative sorbic acid and its salts by using of high performance liquid chromatography(HPLC). Sorbic acid was not detected in spices added meats, grinding cooked meats, bacons, and jerked meats except on ham and sausage. But the concentration range of sorbic acid in sausage was 0.00～1.31g/kg, average 0.44g/kg, and in ham was 0.00～1.31g/kg, average 0.329/kg. There was no sample that sorbate concentration exceeded the legal permitted level 2.0g/kg in cooked meat.

• KSBB Journal
• /
• v.25 no.1
• /
• pp.67-72
• /
• 2010

In this study, we developed a comprehensive correlation for better prediction of the activated sludge concentration in the relationship between measurement of optical density by the Beer's law and sludge properties. Effects of activated sludge properties, which are sludge types and anaerobic storage time, show that absorbance deviation for sludge properties decreased on wavelength of light source near to 950 nm. We also developed a method to measure limitation with non-linear correlation on the measurement of high concentration by the Beer's law using a double layer probe cell and empirical equations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.12
• /
• pp.994-1000
• /
• 2001

In this paper, using micro-stereolithography technology, I fabricated a liquid analyzer to measure ion concentration of a solution. Micro-stereolithography is a technology to fabricate 3-dimensional structure by applying laser beam on liquid photo-polymer. This technology makes it possible to do preassemble fabrication without any extra assembling step after the process. So, the liquid analyzer could be fabricated at very low cost with very simple process by micro-stereolithography technology. The liquid analyzer consists of a chamber for containing the solution, a pump using piezoelectric effect of PZT disk, a static mixer and a sensor for measuring ion concentration using Pt electrodes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.4
• /
• pp.600-610
• /
• 1995

When combustion gas is cooled down below the dew point of sulfuric acid vapor in the heat recovery systems, condensation occurs. Since the condensed sulfuric acid solution causes low-temperature corrosion in materials, it is important to measure the SOx dew point by electric measurement. In this study, two kinds of probes having electric gaps of 1mm or 2mm were used. and experiments were carried out by the parameters of sulfuric acid vapor and water vapor concentration. The changes of electric current caused by sulfuric acid condensed on the surface of probe according to the cooling rate and the probe head surface temperature were sudied. The opimum cooling rate was decreased with the increasing of water vaper concentration regardless of sulfuric acid concentration. The sensitivity of electric current is improved for the narrower gap(1mm) of ring electrodes, but it rarely affects the SOx dew point measuring of different probes according to the change of cooling rate.

• Journal of the Korean Society of Visualization
• /
• v.15 no.2
• /
• pp.26-32
• /
• 2017

Hypochlorous acid(HOCl) is a chemical that is a safe sanitizer and disinfectant approved by the Food and Drug Administration as a food additive, exhibiting strong sterilizing power with low effective chlorine concentration of pH 5.0-6.5 and effective chlorine concentration 10-80 ppm. To apply to fishery industries, we develope the HOCl ice for store or delivery of fishery products. However when HOCl is being frozen, the contained HOCl are expelled out from the ice due to the molecular structures of ice; there is no space to contain HOCl inside. To increase chlorine containing amount in ice, we develop the alginate particles containing HOCl which is bio comparable since alginate is a natural polymer extracted from the brown algae and it is widely used for drug delivery and containing substances, etc. We produce HOCl with water as base solution suppressing osmotic flow from fishery products, and mix it with the developed alginate particles and made HOCl-alginate ice and checked the remaining amount of HOCl. We measure the change of pH and chlorine concentration optimizing the best concentration of alginate particles. Finally, we produce the alginate particle HOCl ices with respect to the alginate's optimal concentration.

• Environmental Analysis Health and Toxicology
• /
• v.24 no.3
• /
• pp.251-259
• /
• 2009

This study was conducted to measure the concentration of PCBs in pine needles and soil in urban (Seoul, many artificial sources of PCBs), semi-rural (Anseong, small town located below Seoul in wind direction) and rural areas (Jincheon, rarely artificial sources of PCBs) in which the artificial production amount of PCBs are different. The total PCBs concentrations in pine needles, which did not show big difference in three sampling sites, were 107.5 pg/g (urban), 94.8 pg/g (semi-rural) and 78.8 pg/g (rural) respectively. The low chlorinated PCBs were major component in pine needles and the PCBs congener concentration profile of each sampling area were similar each other, and the octanol-air partitioning coefficient, Koa, highly correlated with the PCBs concentrations in pine needles. The total PCBs concentrations in soil which did show big difference in three sampling sites, were 830.0 pg/g (urban), 314.1 pg/g (semi-rural) and 136.5 pg/g (rural) respectively. The high chlorinated PCBs were major component in soil and the PCBs congener concentration profile of each sampling area were similar each other. There was no similarity between the PCBs concentration of pine needles and those of soil at each site, because of the different mechanism of deposition and volatilization processes of PCBs. The total PCBs concentrations of 2009 became 12.9 times lower than those of 2001. The reduce rate of PCB 28 was the greatest.