• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.443-447
• /
• 1986

오늘날 제조업에 있어서는 시장의 다양화, 원가절감 및 리드타임의 단축이라는 대내외적 요구에 부응할 수 있는 기술 생산체재의 확립이 요구되고 있다. 이에 따라 설계 및 기술변경(Engineering Change)에따른 원가상승을 막기 위해 CAE(Computer aided engineering), CAD(Computer aided design)의 도입을 서두르게 되었고 CAD데이타의 효율적 이용에 의한 가공 및 생산적 측면에서 CAM(Computer aided manufacturing)의 도입도 검토하게 되었다. 본 논문은 이러한 개념의 발상동기와 이를 뒷받침하기 위한 한국 아이 비 엠이서 제공하는 하드웨어 및 소프트웨어를 소개하고 공장자동화를 위한 기술 생산 통합시스템의 구축이라는 측면에서 아이 비 엠이 추구하는 방향을 검토하고 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.409-413
• /
• 1986

This paper deals with a micro computer based CAD(Computer Aided Design/Drafting) software developed by SERI/KAIST. The objectives of this software(hereinafter, CADMATE) development are to develop a low-cost CAD/CAE system, which means the micro-computer based graphic handling software including its geometrical primitives, graphic editor, external interface and output(drawing) control routine.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.807-811
• /
• 1987

This paper describes the application of CAD/CAM systems to the sales and order entry/engineering stages as well as the design of control systems. Large quantities of drawings are required, and the use of graphic CAD systems can result in considerable savings. Some applications of CAD to system engineering/system generation are described.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.51-56
• /
• 2002

A Korea next-generation high-speed rail system represents a typical example of large- scale multi-disciplinary systems, consisting of subsystems such as train, electrical hardware, electronics, control, Information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. The system therefore, must be developed using systems engineering that is a efficient and effective methodology to design such a complex system and manage its development. This paper presents the results from a computer-aided systems engineering application to the Korea next generation high-speed railway project. Especially, the focus of the study was on requirement management and PBS management.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.116-124
• /
• 2002

The planning of part feeder and other manufacturing automation equipments is almost always underestimated. Planning ahead for those crucial pitfalls can permit steps to take to minimize heir impacts, especially if the problems can be discovered in the planning phase, not on the shop floor. Planning process is an engineering process, namely a series of trade-offs. The effective trade-offs in the shortest amount of time can be possible with the help of a computer-aided ngineering (CAE) technique. The main parts of CAE fur part feeder are database system of fabricated workpiece parts, part feeders, part feeder components. In this study, a planning process of part feeder is presented. Especially, a systematic analysis of workpiece parts and part feeders is performed for the design of databases of CAE system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.531-535
• /
• 1996

Computer aided conceptual solution of engineering problems can be effectively implemented by qualitative reasoning based on a physical model. Qualitative reasoning needs modeling paradigm which provides intellignet control of modeling assumptions and robust inferences without quantitative information about the system. We developed reasoning method using new algebra of qualitative mathematics. The method is applied to a conceptual design scheme of anadaptive control system of cutting process. The method identifies differences between proportional and proportional-integral control scheme of cutting process. It is shown that unfeasible investment could be prevented in the early conceptual stage by the qualitative reasoning procedures proposed in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.269-272
• /
• 1987

This paper is concerned on kinematic analysis and simulation of an automatic feeding mechanism subjected by the motion of a curvilinear inverse cam. The main objection is the development of computer-aided design (CAD) program for simulating the motion of the cam-feeding mechanism using computer-graphics. A computer program CACAFS (Computer-Aided Cam and Automatic Feeding System) is independent of computer hardware used. The program is also interactive using a menu-selection technique. As the second part of the paper for the motion simulation of the cam-feeding system, this paper discusses the state-of-art for CAD. The first part of the paper presents the algorithm to simulate the notion of the cam-feeding mechanism.

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.154-161
• /
• 1997

Because of the complexity of the flower design of roll forming process, in which the flat strip is progressively deformed by successive sets of profiled rolls, a computer-aided design system for the flower design has been developed. It is programmed in AutoLISP and DCL(Dialogue Control Language) of AutoCAD. It has been found that the system is helpful in saving the time and effort required to design the flower of the product to be roll-formed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.354-357
• /
• 1996

Virtual Manufacturing System(VMS) is an integrated computer based model which has physical, logical schema and behavior of real manufacturing system. In this paper, an integrated scheduling system is developed to simulate and control a Virtual Factory. A workflow model is constructed to define and analyze the structure of a VMS. On-line dynamic dispatching system is developed using MultiPass algorithm and scheduling system considering dynamic CAPP is carried out. Integrated scheduling system developed in this paper reduces the discrepancies between virtual model and real manufacturing system, and control of real shop floor is possible.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.278-291
• /
• 1994

A computer-aided robust design (CARD) technique is developed to search for the design variables, optimal as well as robust in the sense of Taguchi method. The CARD technique can effectively handle inequality problems by employing the variable penalty method, and dynamic problems with many design variables and/or with mixed discrete and continuous variables. It is also capable of providing contributions of each design variables to the object funtion and information for future designs. As the illustrative examples, two dynamic systems, engine mounting system and in-line feeder, are treated.