• 제목/요약/키워드: computer to plate

검색결과 557건 처리시간 0.027초

후판 사상압연기 작업룰 초기 크라운 설정 (Establishment of Initial Work Roll Crown in Finishing Plate Mill)

  • 김종택;서재형;정병완
    • 한국정밀공학회지
    • /
    • 제12권3호
    • /
    • pp.73-81
    • /
    • 1995
  • To find a way for establishing work roll initial crown according to roll conditions, computer simutation for predicting plate crown in plate mill is done and effects of roll conditions on plate crown is analyzed. Toll gap rorfile and plate crown are measured to be compared to the calculated values. As a result, regression equation to establish work roll initial crown according to roll conditions such as backup roll diameter, backup roll crown and work roll diameter is obtained.

  • PDF

구개상의 두께에 따른 한국어 자음의 발음 변화에 관한 컴퓨터 분석 - 치조음, 경구개음- (A COMPUTER ANALYSIS ON THE KOREAN CONSONANT SOUND DISTORTION IN RELATION TO THE PALATAL PLATE THICKNESS -Dentoalveolar and hard palatal consonant-)

  • 우이형;최대균;최부병;박남수
    • 대한치과보철학회지
    • /
    • 제25권1호
    • /
    • pp.71-94
    • /
    • 1987
  • This study was carried out to investigate the sound distortion following the alternation of the palatal plate thickness. For this study, 2 healthy male subjects (24-year-old) were selected. Born in Seoul, they both spoke Seoul dialect. First, their sounds of /na(나)/, /da(다)/, /1a(라)/, /ja(자)/, /cha(차)/, /ta(타)/, without inserting plates were recorded, and then the sounds with palatal plates of different thickness were recorded, successively. The plate was fabricated in 3 types, each palatal thickness being 1.0mm, 2.5mm, dentoalveolar portion 2.5mm, other residual portion was 1.0mm, successively. Each type plates named B, C, D-type, in succession. Series of analysis were administered through Computer(16 bit) to analyze the sound distortions. These experiments were analyzed by the LPC (without weighting, pre-weighting, post-weighting) of the consonants, vowels portion, formant frequency of the vowels and word duration of the consonants. The findings led to the following conclusions: 1. There was no correlation of the distortion rate on the 2 informants. 2. Generally, vowels were not affected by the palatal plate thickness in the formant analysis, however, more distortion was detected in the LPC analysis, especially C, D-type plates. 3. Consonants distortion was more evident in the C, D-type plate. 4. The second formant was most disturbed and reduced in the all consonants with insertion of the palatal plate, especially C, D-type plate. 5. Word duration was shortened in the plate inserted(except /ja/, /cha/), especially C, D-type. 6. It was found that dentoalveolar, hard palatal sounds were severely distorted in plate inserted, and they were mainly affected by the dentoalveolar portion thickness. 7. There was correlation between palatal thickness and consonants quality.

  • PDF

탁아기관의 급식개선을 위한 식단의 운용시험 (Evaluation of Implemented Computer Generated Menus for the Improvement of Food Service Operation in Child-Care Centers)

  • 곽동경;조유선;이혜상
    • 한국식품조리과학회지
    • /
    • 제10권2호
    • /
    • pp.104-110
    • /
    • 1994
  • The purpose of this study was to evaluate implemented computer generated menus for foodservice in child-care centers. Computer generated menus, which were developed in the previous study, were based on the children's preferences and the bugets of the centers. Computer generated menus were implemented for food service in each national/public, foundation established, and employer-supported child care centers in Seoul, respectively. Plate wastes, preferences, and nutrient intakes of their meals of the existing menus were compared with those of computer-generated menus. The nutrient contents from their nutritional analysis of meals of the computer generated and existing menus satisfied the recommended dietary level (RDfU3). However, at the eaten of computer-generated menus satisfied RDA/3, and the existing menus lacked energy, Ca, Vit Bl, Vit B2 and Vit C. The meals served by computer-generated menus reduced the plate wastes and increased the acceptability of the children in day care centers.

  • PDF

강성계수의 전달에 의한 평판 구조물의 구조해석 (Structural Analysis of Plate Structures by Transfer of Stiffness Coefficient)

  • 최명수
    • 동력기계공학회지
    • /
    • 제11권1호
    • /
    • pp.92-97
    • /
    • 2007
  • It is important to compute the structural analysis of plate structures in structural design. In this paper, the author uses the finite element-transfer stiffness coefficient method (FE-TSCM) for the structural analysis of plate structures. The FE-TSCM is based on the concept of the successive transmission of the transfer stiffness coefficient method and the modeling technique of the finite element method (FEM). The algorithm for in-plane structural analysis of a rectangular plate structure is formulated by using the FE-TSCM. In order to confirm the validity of the FE-TSCM for structural analysis of plate structures, two numerical examples for the in-plane structural analysis of a plate with triangular elements and the bending structural analysis of a plate with rectangular elements are computed. The results of the FE-TSCM are compared with those of the FEM on a personal computer.

  • PDF

An Enhanced Two-Stage Vehicle License Plate Detection Scheme Using Object Segmentation for Declined License Plate Detections

  • Lee, Sang-Won;Choi, Bumsuk;Kim, Yoo-Sung
    • 한국컴퓨터정보학회논문지
    • /
    • 제26권9호
    • /
    • pp.49-55
    • /
    • 2021
  • 본 논문에서는 실제 도로에서 기울어진 촬영 각도로 인하여 회전된 차량 번호판을 정확하게 탐지하기 위하여 객체 세그먼테이션(object segmentation)을 이용하는 개선된 2-단계 차량 번호판 탐지 모델을 제안한다. 기존 연구에서 제안한 3-단계 차량 번호판 탐지 파이프라인 모델은 차량 번호판이 많이 기울어져 있을수록 탐지 정확도가 낮아지는 문제가 있다. 이를 해결하기 위해서 기존의 3-단계 모델에서 사각형 형태만으로 차량 후보 영역과 차량 번호판 후보 영역을 인식하는 전위 2개의 처리 단계 대신에 임의의 형태로 객체 탐지가 가능한 객체 세그먼테이션을 이용하는 하나의 단계로 대체함으로써 탐지 과정을 단순화하였으며 궁극적으로는 임의의 형태로 기울어진 차량 이미지에 대해서도 탐지 성능을 개선하였다. 기울어진 차량 번호판 이미지를 대상으로 실시한 차량 번호판 탐지 모델의 정확도 분석 실험 결과에 의하면 기존의 3-단계 차량 번호판 탐지 모델보다 제안된 2-단계 기법이 탐지 과정을 단순화하였음에도 최대 약 20%의 탐지 정확도를 개선할 수 있는 것으로 분석되었다.

불규칙 조명 환경에 강인한 번호판 문자 분리 기법 (Robust Scheme of Segmenting Characters of License Plate on Irregular Illumination Condition)

  • 김병현;한영준;한헌수
    • 한국컴퓨터정보학회논문지
    • /
    • 제14권11호
    • /
    • pp.61-71
    • /
    • 2009
  • 자동차의 번호판은 차량의 등록 정보를 확인할 수 있는 유일한 방법이다. 불법 주정차 단속 및 주차 관리 시스템에 차량의 등록 정보를 확인하기 위해 카메라를 이용한 무인 인식시스템의 개발이 활발히 연구되고 있다. 하지만, 일반 도로상에서 날씨나 주변 장애물들은 자동차 번호판 상에 조명 변화를 일으켜 번호판 문자의 추출을 어렵게 한다. 본 논문은 번호판 영상을 개선하여 조명변화에 강인한 문자 추출 알고리즘을 제안한다. 제안하는 기법은 번호판 영상의 명암 대비도를 높이기 위해 Chi-Square 확률 밀도 함수를 이용한다. 또한, 정확한 문자영역을 추출하기 위해, 적응적인 문턱값을 적용함으로써 고품질의 이진화 영상을 얻는다. 번호판의 문자들을 추출하는 일련의 과정에서 방해가 되는 잡음들을 전처리와 레이블링을 통해 제거한다. 마지막으로 번호판의 문자들은 번호판의 기하학적 특징을 이용한 이진화 영상의 프로파일링으로부터 추출된다.

임베디드 시스템에서의 템플릿 매칭 기법을 이용한 번호판 인식 시스템 개발 (The Development of a License Plate Recognition System using Template Matching Method in Embedded System)

  • 김홍희;이재흥
    • 전기전자학회논문지
    • /
    • 제15권4호
    • /
    • pp.274-280
    • /
    • 2011
  • 본 연구에서는 SoC를 이용한 임베디드 시스템에 리눅스 OS 환경을 구축하고 번호판 인식 시스템을 구현하여 그 성능을 측정하였다. 자동차 번호판을 인식하기 위해서는 번호판을 검출하고 검출된 번호판을 보정 한 뒤 각 문자들에 대해 인식을 한다. 번호판 검출 방법으로는 레이블링 기법과 숫자의 특징을 이용하여 검출하였다. 검출된 번호판의 표기되어 있는 숫자들은 각각의 좌표가 있다. 이러한 숫자들의 좌표를 비교하여 영상을 보정하고 템플릿 매칭을 통해 인식을 한다. 그 결과로 번호판의 검출율은 96%, 문자 인식률은 73%, 숫자 인식률은 97%로 나타났다. 인식 시스템은 기존의 PC기반이 아닌 임베디드 보드에서 측정 되었으며 총 인식시간은 약 0.66초가 소요되었다.

Moir$\acute{e}$s in 3-D Display: How to eliminate them

  • Son, Jung-Young;Kim, Shin-Hwan;Jung, Dae-Hyun;Park, Min-Chul
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.939-942
    • /
    • 2008
  • Moir$\acute{e}$s are a natural interference phenomenon which occurs whenever a transparent regular pattern plate is overlapped on another regular pattern plate. In the contact-type 3 dimensional imaging systems, the moires are inherent because an image display panel is seen through a viewing zone forming optical plate. The mathematical analysis of moires in the systems shows that they can be minimized by the proper selection of overlapping angles between them. The angle is different for pixels with different aspect ratios.

  • PDF

후판 에지압연시 선후단부의 변형거동 (An Investigation of Deformation Behavior of Plate Ends in Edge Rolling)

  • 천명식;황상무;이준정;김종근
    • 대한기계학회논문집
    • /
    • 제16권7호
    • /
    • pp.1278-1284
    • /
    • 1992
  • 본 연구에서는 무전단 후판압연기술을 위한 요소기술로써 지난호에 게재한 오버랩연구에 이어 모델압연 실험과 유한요소 해석을 이용한 에징시 비정상부의 폭변 형거동에 대한 연구결과를 보고한다.

평판 및 모서리형 현장열저항 측정기기 개발을 위한 Computer Simulation (Computer Simulation for Developing the Plate and Corner Type In-Situ Thermal Resistance Measuring Device)

  • 강병웅;박승익;유승선;박효순
    • 태양에너지
    • /
    • 제19권4호
    • /
    • pp.71-80
    • /
    • 1999
  • 본 연구는 예비실험에서 나타난 평판 및 모서리형 현장 열저항 측정기의 내부공기 온도편차를 줄일 수 있는 방안을 모색하기 위한 것으로 연구결과 다음과 같은 결론을 얻을 수 있었다. 첫째, 측정기의 크기에 따라 기기내의 온도편차는 큰 변화가 없으므로 사용과 운반이 용이한 소형이 적정하며 둘째, 방열판의 위치는 측정기 Casing을 통한 부수적인 손실열량을 최소화하기 위해 측정기 내부 표면과 이격시켜 설치하고 셋째, 방열판의 온도는 측정기내부온도가 실내온도까지 접근하는 도달시간을 고려하여 가능한 한 낮게 설정하고 넷째, 측정기 내부에 설치되는 팬은 측정기의 상부에 설치하여 기류를 하향으로 토출하며 다섯째, 방열판 앞에는 Baffle Plate를 설치하는 것이 기기내의 온도편차를 줄일 수 있는 유효한 방법임을 알 수 있었다.

  • PDF