• 대한전자공학회논문지
• /
• 제12권4호
• /
• pp.7-14
• /
• 1975

본 논문은 대칭 (단자 단로망이론을 근거로 분포정수 회로에 대한 매트릭스식에 의해서 결합기의 결합도와 특성임피던스간의 관계식을 얻어내었고 마이크로스트립 전송선로에 대한 칭전기학적 접근방식에 의해 등각사상법의 적용방식을 밝히고 경계치조건을 만족시키는 특성임피이던스식과 유전체 경계면상에서의 위상속도와 우수모드 및 기수모드 시의 유효유전율의 관계에 의해서 결합영역의 길이를 결정하는 식을 유도하였다. 결과식을 이용하여 원하는 방향성 결합기의 칫수를 콤퓨타 프로그램에 의하여 설계하였으며 설계한 결합기의 칫수에 따라 양면 유전체기판 Custom High K 707L-2.5을 사용하여 7개의 결합기를 제작하였다. 이 제작된 결합기는 실험에 의해서 이론치와 비교 고찰하였으며 10dB에서 20dB까지의 요구되는 결합기는 비교적 좋은 결과를 얻었다. A significant new technique in the dsvelopment of micro-wave circuits is the process of untilization of coupled lines in the transverse electro-magnetic field. The bases for this technique are the application of even-and odd-mode characteristic impedances of the transmission line. This article describes the properties of directional couplers and explains a prccfdure usrd to design micro-strip directional couplers with the aid of the computer. The article also describes the experimental results obtained from seven microstrip couplers, which were built to verify the computer program and the approximate solutions. It can be seen that in cases at X-band where couplings of 10 to 20dB are required, the computer program and approximate solutions will produce good results.

• 산업기술연구
• /
• 제5권
• /
• pp.65-71
• /
• 1985

In case that the datums chosen for dimension on engineering drawings are unsuitable for manufacturing and inspecting and inspection purposes and it is necessary to redimension the design from new datum. L. E. Farmer presented a theory for performing this change of datum, discussed a procedure for allocating tolerances to new dimensions and presented the procedure of change of datum as part of a computer aided design system. This paper deals with the development of the interactive computer program which is insufficiently presented without all coding list of program by L. E. Farmer.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.95-103
• /
• 1996

This paper describes a computer aided design system for spur and helical gears. To establish the appropriate program, an integrate approach based on a rule-base system was adopted. This system is implemented on the personal computer and its environment is a commercial CAD package called AutoCAD. This system includes a main program and five sub-modules such as data input module, tooth profile drawing module, strength calculation module, and drawing edit module. In the main program, all the sub-modules are loaded and the type of gear and tooth profile are selected. In the data input module, the variables which are necessary to the design of gear are selected from the database. In the drawing module, from the calculated results, the required gear tooth is produced on the screen. The developed system that aids gear designer provides powerful capabilities for gear design.

• 한국실내디자인학회논문집
• /
• 제12호
• /
• pp.40-49
• /
• 1997

What's the direction of INTERIOR ARCHITECTURAL DESIGN in 21 Century High Tech\ulcorner The purpose of this research is to show not only practical use of Computer Graphic(CG) as simple tool function, but offering conversation with computer and other ways of method. When we consider poor CG market, investment on the research of VR(Virtual Reality) is the most urgent. The investment on VR will solve various problems. Firstly. It will solve the problems drived from Interior design process by making spatial images like reality. Secondly, It will solve high wages and financial difficulties caused by raise cost funds. Thirdly, It prevents in a road from foreign company that will bring enormous program, caused by opening the domestic market. Also, It help interior designer check in advance the problems in constructure through showing him a supposed imagination including the system and location of equipments. But it is reality that even ordinary American can't offer VR(Virtual Reality) System. We should have noted that it is normal to spend 10 billion won for such presentation as Model House in the large corporation. We must acknowledge that it is such a waist of money nationally. Therefore, investment on CG & VR System is essential in order to save cost more effective presentation & interior design. We will see great result within a year. As we can see, there is huge area we have make develop. One of them is specific technical plan on VR System and study of flow chart. We close with simple methodological way to use VR System and will study Computer System. Which is fitting to CG that we have to solve the link of hardware and software on VR System\ulcorner We know from the cases in other countries that continuous research on this subject has great value for Interior Architectural Design and its effective use. When we try hard not only for methodological use but practical use, the purpose of CG and VR System will be a factor to contribute on this subject for better Interior design & presentation.

• 복식
• /
• 제54권6호
• /
• pp.65-76
• /
• 2004

At the global times, each country is developing various designs, symbolizing its own country's original images. So significant and continual developments must be made in the aspect of the national identity and image promotion as well as for producing added value by commercializing the designs in the manner of discriminating against cultures. So this study is trying develop the textile design that express the beauty of Korean traditional pattern. For textile design, it was selected a rice-cake pattern and developed a textile pattern design by using computer design program of adobe illustrator 10.0.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 가을 학술발표회 논문집
• /
• pp.121-126
• /
• 1992

This Paper presents a development of a CAD system for interactive design of steel frames. The adopted building code for structural design is "Steel Building Codes" enacted by the Architectural Institute of Korea in 1973. The selected member sections, therefore, are domestic rolled sections - especially, H shapes. The authors aim at a development of an integrated computer programs repeating plane frame analysis and design of members until minimum weight design condition is satisfied. This program also provides various section change functions to improve the shortcomings of automatic design.ic design.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.305-312
• /
• 2003

Recently, with a progressive development of hardware of computer, the internet and network technology, the environment of construction varies rapidly due to increase the complex form in structure shape and system. With variations, the CAD system for design and products also varies from 2D system to 3D system. This study mainly deals with the methodology of automatic connection design of 3D CAD system, steel connection system (XSteel) using macro. First, using design program in the steel connection system, Xsteel, the joint connection macro will be made up and established the detail classes of design. The next, Database Program (Converter Program) related to the general structural analysis program (MIDAS) and the steel connection program (Xsteel) is constructed for data interface between two programs. From this study, if the merits of 3D CAD system and converter program are utilized well, it is expected that the time needed in modeling and the amounts due to material loses decrease gradually.

• 수산해양기술연구
• /
• 제39권4호
• /
• pp.284-290
• /
• 2003

It is very important to minimize the weight of shaft from the viewpoint of economics and manufacture. For minimizing effectively the diameter of shaft in torsional shafting, authors developed computer program using the real-coded genetic algorithm which is one of optimizing techniques and based on real coding representation of genetic algorithm. In order to confirm the accuracy and effectiveness of the developed computer program, the computational results by the developed program were compared with those of conventional strength, stiffness and vibration designs for a generator shafting.

• 한국포장학회지
• /
• 제6권1호
• /
• pp.12-18
• /
• 2000

If optimum design technique is applied in the design of packaging container for bulk materials, merits on the side of not only economic and compression performance but distribution efficiency are expected. In this study, on the ground of the optimum models for required board area and compression strength performance, optimum design program having faculties of outward and inward optimum design and information design was developed. This program was composed of input module, output module, database and management module, and calculation module. Though the packaging specifications ars same, requied board area, board composition and cost of container were greatly different according to exterior packaging conditions. Also, about 12% in weight of container was lighter, and about $13{\sim}17%$ in cost of container was reduced when the program was applied for 2 kinds of bulk materials.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.59-63
• /
• 2005

금속-강유전체-반도체 전계효과 트랜지스터 (MFS/MFISFET)의 동작 특성을 technology computer-aided design (TCAD)과 simulation program with integrated circuit emphasis (SPICE)를 결합하여 전산모사하는 방법을 제시하였다. 복잡한 강유전체의 동작 특성을 수치해석을 이용하여 해석한 다음, 이를 이용하여 금속-강유전체-반도체 구조에서 반도체 표면에 인가되는 표면 전위를 계산하였다. 계산된 TCAD 변수인 표면 전위를 전계효과 트랜지스터의 SPICE 모델에서 구한 표면 전위와 같다고 보고게이트 전압에 따른 전류전압 특성을 구할 수 있었다. 이와 같은 방법은 향후 MFS/MFISFET를 이용한 메모리소자의 집적회로 설계에 매우 유용하게 적용될 수 있을 것이다.