• Bulletin of the Korean Space Science Society
• /
• 1993.10a
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.47-55
• /
• 2015

Recently, the environment of a hospital information system is a trend to combine various SMART technologies. Accordingly, various smart devices, such as a smart phone, Tablet PC is utilized in the medical information system. Also, these environments consist of various applications executing on heterogeneous sensors, devices, systems and networks. In these hospital information system environment, applying a security service by traditional access control method cause a problems. Most of the existing security system uses the access control list structure. It is only permitted access defined by an access control matrix such as client name, service object method name. The major problem with the static approach cannot quickly adapt to changed situations. Hence, we needs to new security mechanisms which provides more flexible and can be easily adapted to various environments with very different security requirements. In addition, for addressing the changing of service medical treatment of the patient, the researching is needed. In this paper, we suggest a dynamic approach to medical information systems in smart mobile environments. We focus on how to access medical information systems according to dynamic access control methods based on the existence of the hospital's information system environments. The physical environments consist of a mobile x-ray imaging devices, dedicated mobile/general smart devices, PACS, EMR server and authorization server. The software environment was developed based on the .Net Framework for synchronization and monitoring services based on mobile X-ray imaging equipment Windows7 OS. And dedicated a smart device application, we implemented a dynamic access services through JSP and Java SDK is based on the Android OS. PACS and mobile X-ray image devices in hospital, medical information between the dedicated smart devices are based on the DICOM medical image standard information. In addition, EMR information is based on H7. In order to providing dynamic access control service, we classify the context of the patients according to conditions of bio-information such as oxygen saturation, heart rate, BP and body temperature etc. It shows event trace diagrams which divided into two parts like general situation, emergency situation. And, we designed the dynamic approach of the medical care information by authentication method. The authentication Information are contained ID/PWD, the roles, position and working hours, emergency certification codes for emergency patients. General situations of dynamic access control method may have access to medical information by the value of the authentication information. In the case of an emergency, was to have access to medical information by an emergency code, without the authentication information. And, we constructed the medical information integration database scheme that is consist medical information, patient, medical staff and medical image information according to medical information standards.y Finally, we show the usefulness of the dynamic access application service based on the smart devices for execution results of the proposed system according to patient contexts such as general and emergency situation. Especially, the proposed systems are providing effective medical information services with smart devices in emergency situation by dynamic access control methods. As results, we expect the proposed systems to be useful for u-hospital information systems and services.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.67-88
• /
• 2018

Until recently, as we recognize the significance of sustainable growth and competitiveness of small-and-medium sized enterprises (SMEs), governmental support for tangible resources such as R&D, manpower, funds, etc. has been mainly provided. However, it is also true that the inefficiency of support systems such as underestimated or redundant support has been raised because there exist conflicting policies in terms of appropriateness, effectiveness and efficiency of business support. From the perspective of the government or a company, we believe that due to limited resources of SMEs technology development and capacity enhancement through collaboration with external sources is the basis for creating competitive advantage for companies, and also emphasize value creation activities for it. This is why value chain network analysis is necessary in order to analyze inter-company deal relationships from a series of value chains and visualize results through establishing knowledge ecosystems at the corporate level. There exist Technology Opportunity Discovery (TOD) system that provides information on relevant products or technology status of companies with patents through retrievals over patent, product, or company name, CRETOP and KISLINE which both allow to view company (financial) information and credit information, but there exists no online system that provides a list of similar (competitive) companies based on the analysis of value chain network or information on potential clients or demanders that can have business deals in future. Therefore, we focus on the "Value Chain Network System (VCNS)", a support partner for planning the corporate business strategy developed and managed by KISTI, and investigate the types of embedded network-based analysis modules, databases (D/Bs) to support them, and how to utilize the system efficiently. Further we explore the function of network visualization in intelligent value chain analysis system which becomes the core information to understand industrial structure ystem and to develop a company's new product development. In order for a company to have the competitive superiority over other companies, it is necessary to identify who are the competitors with patents or products currently being produced, and searching for similar companies or competitors by each type of industry is the key to securing competitiveness in the commercialization of the target company. In addition, transaction information, which becomes business activity between companies, plays an important role in providing information regarding potential customers when both parties enter similar fields together. Identifying a competitor at the enterprise or industry level by using a network map based on such inter-company sales information can be implemented as a core module of value chain analysis. The Value Chain Network System (VCNS) combines the concepts of value chain and industrial structure analysis with corporate information simply collected to date, so that it can grasp not only the market competition situation of individual companies but also the value chain relationship of a specific industry. Especially, it can be useful as an information analysis tool at the corporate level such as identification of industry structure, identification of competitor trends, analysis of competitors, locating suppliers (sellers) and demanders (buyers), industry trends by item, finding promising items, finding new entrants, finding core companies and items by value chain, and recognizing the patents with corresponding companies, etc. In addition, based on the objectivity and reliability of the analysis results from transaction deals information and financial data, it is expected that value chain network system will be utilized for various purposes such as information support for business evaluation, R&D decision support and mid-term or short-term demand forecasting, in particular to more than 15,000 member companies in Korea, employees in R&D service sectors government-funded research institutes and public organizations. In order to strengthen business competitiveness of companies, technology, patent and market information have been provided so far mainly by government agencies and private research-and-development service companies. This service has been presented in frames of patent analysis (mainly for rating, quantitative analysis) or market analysis (for market prediction and demand forecasting based on market reports). However, there was a limitation to solving the lack of information, which is one of the difficulties that firms in Korea often face in the stage of commercialization. In particular, it is much more difficult to obtain information about competitors and potential candidates. In this study, the real-time value chain analysis and visualization service module based on the proposed network map and the data in hands is compared with the expected market share, estimated sales volume, contact information (which implies potential suppliers for raw material / parts, and potential demanders for complete products / modules). In future research, we intend to carry out the in-depth research for further investigating the indices of competitive factors through participation of research subjects and newly developing competitive indices for competitors or substitute items, and to additively promoting with data mining techniques and algorithms for improving the performance of VCNS.

• Asia pacific journal of information systems
• /
• v.18 no.3
• /
• pp.21-43
• /
• 2008

The task network which is formed of different individuals can be recognized as a social network. Therefore, the way to communicate with people inside or outside the network has considerable influence on their outcome. Moreover, the position on which a member stands in a network shows the different effects of the information systems supporting communication with others. In this paper, it is to be studied how personal CMC (computer-mediated communication) tools affect the mission that those who work for a network perform through diverse task networks. Especially, we focused on synchronicity of CMC. On this score, the perspective of Media Synchronicity Theory was taken that had been suggested by criticizing Media Richness Theory. It is the objective, from this perspective, to find which characteristics of networks make the value of IT supporting synchronicity high. In the research trends of social networks, there have been two traditional perspectives to explain the effect of network: embeddedness and diversity ones. These differ from the aspect which type of social network can provide much more economic benefits. As similar studies have been reported by various researchers, these are also divided into the bonding and bridging views which are based on internal and external tie, respectively, Size, density, and centrality were measured as the characteristics of personal task networks. Size means the level of relationship between members. It is the total number of other colleagues who work with a specific member for a certain project. It means, the larger the size of task network, the more the number of coworkers who interact each other through the job. Density is the ratio of the number of relationships arranged actually to the total number of available ones. In an ego-centered network, it is defined as the ratio of the number of relationship made really to the total number of possible ones between members who are actually involved each other. The higher the level of density, the larger the number of projects on which the members collaborate. Centrality means that his/her position is on the exact center of whole network. There are several methods to measure it. In this research, betweenness centrality was adopted among them. It is measured by the position on which one member stands between others in a network. The determinant to raise its level is the shortest geodesic that represents the shortest distance between members. Centrality also indicates the level of role as a broker among others. To verify the hypotheses, we interviewed and surveyed a group of employees of a nationwide financial organization in which a groupware system is used. They were questioned about two CMC applications: MSN with a higher level of synchronicity and email with a lower one. As a result, the larger the size of his/her own task network, the smaller its density and the higher the level of his/her centrality, the higher the level of the effect using the task network with CMC tools. Above all, this positive effect is verified to be much more produced while using CMC applications with higher-level synchronicity. Among the a variety of situations under which the use of CMC gives more benefits, this research is considered as one of rare cases regarding the characteristics of task network as moderators by focusing ITs for the operation of his/her own task network. It is another contribution of this research to prove empirically that the values of information system depend on the social, or comparative, characteristic of time. Though the same amount of time is shared, the social characteristics of users change its value. In addition, it is significant to examine empirically that the ITs with higher-level synchronicity have the positive effect on productivity. Many businesses are worried about the negative effect of synchronous ITs, for their employees are likely to use them for personal social activities. However. this research can help to dismiss the concern against CMC tools.

• The Journal of Fisheries Business Administration
• /
• v.17 no.2
• /
• pp.65-106
• /
• 1986

1, The Purpose of Study This is a study on the Evaluation of the operating of Fisheries Extension Services of Korea, for performing the activities such as guiding fisheries technique as well as offering industrial information to the fishermen in fishing village. By doing so, the Fisheries Extension Sevices(FES) can materialize the continued growth of fisheries, the social and economic development of fishing village, and the increase in income by enhancing the knowledge level of Fishermen, etc. In performing fisheries policy, this activity plays a great role on the research and development activity, and it has become practical since 1976 in Korea. In order to meet immediately with the problem of fisheries technical innovation and rapid environmental changes surrounding the fisheries, the fishermen should not only enhance their scientific and comprehensive capacity in fisheries technique but abtain various effective information. Generally, as most of all the fishemen are poor in the managerial structure and scattered in fishing villages, they have little opportunity in the contact of information. As a result, it is nessessary for the FES to perform the fishing business by the extension service officials who has received special training and acquired fisheries know-how in these fields. And yet, FES is under the unfullfilled circumstance in such factors as manpower, technical know-how, equipment, and the service system etc., which is required in promoting the social, economic development of fishing village and in resolving the high technique demand of fisherman. This study on the fisheries extension services have been studied from those backgrounds. 2. Research Method The data of collecting methods which were necessary in carrying out this study was adopted by the questionaire research on the present extension service activity, through the subject of the extension services (driving agency of the work and the officials), the object(fishemen) and the 3rd observers to the extension services (the authorities concerned). The research sample was taken by the sampling extraction of total 1, 774 men from the above 3 groups. And the research was carried out from August, 1986 to October, 1986, supported from the Fisheries Extension Office (FEO) located in field during the research process. In this study, the levels of the extension operating were determined and estimated in accordance with the extension service method, morale of extension service officials and the extension service system, etc. through the collected data of the research questionaire paper. And based on this result, the essential conditions of the extension services were grasped, and also we tried to present the various activity plan necessary to promote the operating of the extension services. The questionaire research data was calculated by the computer center of National Fisheries University of Pusan, and the total result was again tried on the one demension analysis along with two dimension analysis to search out the relativity between the questionaire, and the statistical test was done $\chi$$^2$test in significance level of l~5%. 3. Contents of Study This study consists of 7 chapters and the contents are as follows : Chapter I : The object and method of the study Chapter II : The assessment and analysis of the extension services Chapter III : The contents and method of the extension services Chapter IV : Analysis of the essential conditions for the extension services Chapter V : The evaluation of activities of extension services Chapter Ⅵ : Conclusion.4. Results and RecommendationTherefore, the results of this study estimated by logical process and analysis are as follows : 1) Most of Korean fishing villages and coastal fishermen have shown much concerns about fisheries technique and social changes, thus many of them were confronted with new problems on how to adapt and to meet changes. 2) Majority of fishermen estimated FEO as an organization of specific technologies with all the thing concerning the fisheries technique in general. Therefore the fishermen wanted to utilize the FEO as an adaptable method for the modern fisheries techniques as well as the environmental changes. 3) In contrast with the fast changes of the fisheries technique, the complexity and variety of technical system and the broadness of fishing village and fishermen, it was revealed that the necessary factors such as the facilities, manpower, budget, and the level of applying techniques of the FEO located in field were highly insufficient. Accordingly, the guiding efficiency was low and the extension services did not provide full solution to the various request from fishermen. 4) It is possible to classify the activation factor for the extension service into two large dimension ; personal dimension relevant to guidance officials and work dimension relevant to the organization. And it was found that the activation level of the work dimension was far lower than the personal dimension between them. So, the activation should be done first in the dimesion to promote the activation of the extension services. 5) The extension services officials are now demoralized in general, thus it is necessary to take reality into consideration : the expense of activity, the adequate endowment of activity scope and the reasonable operation of the position class, etc to enhance its morale. However, in order to do the FES activation, first of all, the systems should be established which is lain unsettled stage until now. And there must be change in the understanding of government i.e. the fisheries extension services are the essential policy subject to build up the base of fisheries growth and modernize the fisheries management. And it should be driven positively with the recognition of the "lasting project".g project".uot;.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.75-85
• /
• 2017

A method to estimate hourly temperature profiles on calm and clear nights was developed based on temporal changes of inversion height and strength. A meteorological temperature profiler (Model MTP5H, Kipp and Zonen) was installed on the rooftop of the Highland Agriculture Research Institute, located in Daegwallyeong-myeon, Pyeongchang-gun, Gangwon-do. The hourly vertical distribution of air temperature was measured up to 600 m at intervals of 50 m from May 2007 to March 2008. Temperature and relative humidity data loggers (HOBO U23 Pro v2, Onset Computer Corporation, USA) were installed in the Jungdae-ri Valley, located between Gurye-gun, Jeollanam-do and Gwangyang-si, Jeollanam-do. These loggers were used to archive measurements of weather data 1.5 m above the surface from October 3, 2014, to November 23, 2015. The inversion strength was determined using the difference between the temperature at the inversion height, which is the highest temperature in the profile, and the temperature at 100 m from the surface. Empirical equations for the changes of inversion height and strength were derived to express the development of temperature inversion on calm and clear nights. To estimate air temperature near the ground on a slope exposed to crops, the equation's parameters were modified using temperature distribution of the mountain slope obtained from the data loggers. Estimated hourly temperatures using the method were compared with observed temperatures at 19 weather sites located within three watersheds in the southern Jiri-mountain in 2015. The mean error (ME) and root mean square error (RMSE) of the hourly temperatures were $-0.69^{\circ}C$ and $1.61^{\circ}C$, respectively. Hourly temperatures were often underestimated from 2000 to 0100 LST the next day. When temperatures were estimated at 0600 LST using the existing model, ME and RMSE were $-0.86^{\circ}C$ and $1.72^{\circ}C$, respectively. The method proposed in this study resulted in a smaller error, e.g., ME of $-0.12^{\circ}C$ and RMSE of $1.34^{\circ}C$. The method could be improved further taking into account various weather conditions, which could reduce the estimation error.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.2
• /
• pp.75-94
• /
• 1996

This survey study was aimed at identifying the degree of educational need of the KNOU(Korea National Open University) nursing students defined as admission purposes, satisfaction of distance learning education, learning methods, and courses after graduation. Among randomly assigned 1000 students, 320 KNOU nursing students who allowed to participate in the study completed the questionnaires. The data were analyzed using descriptive statistics, chi-square test, and t-test, Results of this study were as follows : 1. The admission purposes of the KNOU nursing students were 'in order to get a bachelor's degree(83.8%)', 'to acquire knowledge for task(61.3%)', or 'to be admitted for the graduate school (53.1%)' etc. Comparing the admission purposes by age, tow items- 'to explore new possibilities for myself' and 'excellent curriculum' showed statistically significant differences. These two items were also found to show significant differences by marital status. 2. For the media maintenance, the results showed that students use their own cassett radios(96.3%), VTR(49.4%), TV only for the study (44.1%), personal computer (3.31%), or joining Hitel (6.3%). 3. Listening rates of the radio lecture were 'over 80%(9.1%)', '50-80%(9.1%)', '20-50%(18.1%)', 'below 20%(30%)' and 'never(33.1%)', And record lecture showed listening rates as follows : 'over80%(17.2%)', '50-80%(15.9%)', '20-50%(24.4%)', 'below 20%(27,2%)' and 'never(14.4%)'. 4. The difficulties with KNOU life were 'listening radio lectures(38.8%)', studying by following teaching schedules (37.8%)', 'isolated self-study(10.3%)', and 'appearance in the attending classes(8.1%)'. 5. As for satisfaction with teaching methods, the data showed that 81.2% of the respondents were satisfied (or very satisfied) with 'attending classes' and 75%, with 'paper lectures'. On the other hand some of respondents were very dissatisfied with 'recorded lecture(12.8%)' and 'radio lecture(10.9%)' 6. The results also showed that the students want to have 'video conferencing lecture(77.2%)', 'cable TV(64.1%)' and 'CD ROM program' to improve learning effects. 7. Concerning learning attitudes, 48.8% of the students reported 'study mainly for examnination', and only 4.1% answered 'study every day with plan'. The learning attitude showed significant differences by marital status and age. The students also evaluated themelves as 'study very hard(5.9%)', 'study hard in general(41.6%)', 'study a little(40.3%)' and 'study little(11.9%)'. 8. The students responded the most effective learning material was the 'textbook (92.2%)'. 9. For the purposes of using the local center, the results showed 'for the attending classes(76.3%)', 'for the use of references(14.7%)', and 'for the study group(66.7%)'. 10. The results revealed that 20.3% of the respondents had ever experienced unregistration or temporary withdrawal, and 53.4% among them did not register more than one time. The most common reason for the unregistration was 'due to family affairs or their job (70.8%)'. 11. 88.1% of the respondents answered 'they will graduate without fail'. 12. Regarding the benefits from the KNOU graduation, respondents indicated 'graduate school admission(38.1%)', 'self-confidence in social life(17.5%)', and understanding social problems (10.9%)'. 13. 64.4% of the students showed that they have intention to enter the graduate school. The item 'changing work place' showed statistically significant differences by marital status and age.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.290-297
• /
• 2009

In case of radiation treatment using small field high-energy photon beams, an accurate dosimetry is a challenging task because of dosimetrically unfavorable phenomena such as dramatic changes of the dose at the field boundaries, dis-equilibrium of the electrons, and non-uniformity between the detector and the phantom materials. In this study, the absorbed dose in the phantom was measured by using an ion chamber and a diode detector widely used in clinics. $GAFCHROMIC^{(R)}$ EBT films composed of water equivalent materials was also evaluated as a small field detector and compared with ionchamber and diode detectors. The output factors at 10 cm depth of a solid phantom located 100 cm from the 6 MV linear accelerator (Varian, 6 EX) source were measured for 6 field sizes ($5{\times}5\;cm^2$, $2{\times}2\;cm^2$, $1.5{\times}1.5\;cm^2$, $1{\times}1\;cm^2$, $0.7{\times}0.7\;cm^2$ and $0.5{\times}0.5\;cm^2$). As a result, from $5{\times}5\;cm^2$ to $1.5{\times}1.5\;cm^2$ field sizes, absorbed doses from three detectors were accurately identified within 1%. Wheres, the ion chamber underestimated dose compared to other detectors in the field sizes less than $1{\times}1\;cm^2$. In order to correct the observed underestimation, a convolution method was employed to eliminate the volume averaging effect of an ion chamber. Finally, in $1{\times}1\;cm^2$ field the absorbed dose with a diode detector was about 3% higher than that with the EBT film while the dose with the ion chamber after volume correction was 1% lower. For $0.5{\times}0.5\;cm^2$ field, the dose with the diode detector was 1% larger than that with the EBT film while dose with volume corrected ionization chamber was 7% lower. In conclusion, the possibility of $GAFCHROMIC^{(R)}$ EBT film as an small field dosimeter was tested and further investigation will be proceed using Monte Calro simulation.

• Journal of Intelligence and Information Systems
• /
• v.12 no.1
• /
• pp.17-31
• /
• 2006

In this paper, passport recognition and face verification methods which can automatically recognize passport codes and discriminate forgery passports to improve efficiency and systematic control of immigration management are proposed. Adjusting the slant is very important for recognition of characters and face verification since slanted passport images can bring various unwanted effects to the recognition of individual codes and faces. Therefore, after smearing the passport image, the longest extracted string of characters is selected. The angle adjustment can be conducted by using the slant of the straight and horizontal line that connects the center of thickness between left and right parts of the string. Extracting passport codes is done by Sobel operator, horizontal smearing, and 8-neighborhood contour tracking algorithm. The string of codes can be transformed into binary format by applying repeating binary method to the area of the extracted passport code strings. The string codes are restored by applying CDM mask to the binary string area and individual codes are extracted by 8-neighborhood contour tracking algerian. The proposed RBF network is applied to the middle layer of RBF network by using the fuzzy logic connection operator and proposing the enhanced fuzzy ART algorithm that dynamically controls the vigilance parameter. The face is authenticated by measuring the similarity between the feature vector of the facial image from the passport and feature vector of the facial image from the database that is constructed with PCA algorithm. After several tests using a forged passport and the passport with slanted images, the proposed method was proven to be effective in recognizing passport codes and verifying facial images.

• Korean Journal of Oriental Medicine
• /
• v.18 no.2
• /
• pp.65-89
• /
• 2012

Objective : In order to investigate and improve public Korean medical health service satisfaction level, this study was designed. Method : A questionnaire has been conducted on 212 patients who received treatments at six public health centers in the northern part of Gyeongbuk during 15 days between Sep. 24 and Oct. 8, 2011. Result : 1. An Investigation on the usage of herbal clinics in public health centers reveals that 63.7% have received three times or more medical treatments previously and 61.8% have had their illness treated at other medical institutions. In regard to illness 32.1% have had arthritis or muscle aches. 50.9% have taken insurance medication after having had treatments at the public health centers. 66% have assessed acupuncture and moxa cautery the most satisfying. 2. To a question regarding whether herbal health treatment costs higher than that of physician's, the highest response at 31.6% is 'No'. And to a question regarding whether herbal medicines administered at public health centers have more side effects than that of physician's, the highest response at 39.6% is 'No'. 3. To a question regarding whether herbal treatment of public health centers has little effect against acute disease, 48.1% of responses are 'Fair'. To a question regarding whether herbal treatments, when compared with physician's treatments, boost better recovery of patients, 48.1% of responses are 'Fair'. To a question regarding whether herbal medicine is unscientific, when compared with that of western medicine, 38.2% of responses are 'Fair', To a question regarding whether herbal medicine has faster effect on disease than western medicine, 41.0% of responses are 'Fair'. To a question regarding whether herbal medicine is more effective on disease prevention and promotion of health than disease treatment, 38.2% of responses are 'Fair'. And to a question regarding whether the lack of various types of physical therapy devices in herbal medicine, when compared with western medicine causes inconvenience in herbal treatment, 42.0% of responses are 'Fair'. Those responses take up highest portion at each questionnaire. 4. A comparative study between herbal treatments and physician's treatments has also been conducted. To questions regarding which one of the two considering types of disease is the better, responses are the latter accounted for 43.9% against 'Cancer', the latter accounted for 45.3% against 'Endocrine disorders', the former accounted for 30.7% against 'Psychiatric disorders', the latter accounted for 38.2% gainst 'Otolaryngological(ENT) disease', the former accounted for 47.6% against 'Post traumatic stress disorder', and the former accounted for 52.4% against 'Muscle-skeletal disease'. 5. An investigation on frequency of patients' visits via (p<0.05) of subjects show a statistically significant difference. 6. First, an investigation on frequency of reasons of medical treatments reveal that age, occupation, monthly income, and insurance type (p<0.05) of subjects show a statistically significant difference. Secondly, an investigation on frequency of subjects taking insurance medicines after herbal health treatments reveal that monthly income (p<0.05) of subject shows a statistically significant difference. 7. First, an investigation on frequency of a claim that herbal treatments of public health center does not have great effect on acute disease reveals that age, education, and insurance type (p<0.05) of subjects show a statistically significant difference. Secondly, an investigation on frequency of analysis that herbal treatments has faster effect on disease compared with western treatments reveals that education level, religion, monthly income, and insurance type (p<0.05) of subjects show a statistically significant difference. 8. When herbal clinics of public health centers and general herbal medicine institutions are compared, a survey on additional treatments that herbal clinics need the most reveals that education level, monthly income, and insurance type (p<0.05) of subjects show a statistically significant difference. Secondly, an investigation on frequency of subjects who want various forms of herbal medicines reveals that occupation and insurance type (p<0.05) of subjects show a statistically significant difference. Conclusion : In order to improve efficiency of treatments and enhance patient's satisfaction level, this study suggests measures such as providing a differentiated acupuncture treatments as a whole, streamlining an reception procedure, adopting more elaborated computer system for a patient to get proper medical attention, standardizing a treatment duration in order for a maximum result, keeping regular office hours, and optimizing a consultation time for a patient.