• Tunnel and Underground Space
• /
• v.13 no.4
• /
• pp.294-303
• /
• 2003

The structural behaviour of rock mass structure, such as tunnel or slope is critically dependent on the various characteristics of discontinuities. Therefore, it is important to survey and analyze discontinuities correctly for the design and construction of rock mass structure. One inevitable Procedure of discontinuity survey and analysis is joint set identification from a lot of raw directional joint data. The identification procedure is generally done by a graphical method. This type of analysis has some shortcomings such as subjective identification results, inability to use extra information on discontinuity, and so on. In this study, a computer program for joint set identification based on the fuzzy clustering algorithm was implemented and tested using two kinds of joint data. It was confirmed that fuzzy clustering method is effective and valid for joint set identification and estimation of mean direction and degree of clustering of huge joint data through the applications.

• Journal of Broadcast Engineering
• /
• v.14 no.3
• /
• pp.311-321
• /
• 2009

In a single frequency network (SFN) for Advanced Television Systems Committee (ATSC) terrestrial digital television (DTV) system, the interference due to the use of same frequency among multiple transmitters or repeaters is inevitable for receivers. This problem can be solved by adjusting transmit power and time of each transmitter and repeater. To adjust SFNs, the ATSC recommended practice (RP) introduces a transmitter identification (TxID) signal which is embedded in a signal from each transmitter or repeater. This paper proposes an efficient method to estimate the individual reception power from each transmitter or repeater based on the channel profile of SFN and the total reception power. Moreover, field test results are provided to evaluate the performance of the proposed method.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.26-37
• /
• 2004

Consistent and realistic error covariance information is important for position estimation, error analysis, fault detection, and integer ambiguity resolution for differential GNSS. In designing a position domain carrier-smoothed-code filter where incremental carrier phases are used for time-propagation, formulation of consistent error covariance information is not easy due to being bounded and temporal correlation of propagation noises. To provide consistent and correct error covariance information, this paper proposes two recursive filter algorithms based on carrier-smoothed-code techniques: (a) the stepwise optimal position projection filter and (b) the stepwise unbiased position projection filter. A Monte-Carlo simulation result shows that the proposed filter algorithms actually generate consistent error covariance information and the neglection of carrier phase noise induces optimistic error covariance information. It is also shown that the stepwise unbiased position projection filter is attractive since its performance is good and its computational burden is moderate.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.7
• /
• pp.276-281
• /
• 2007

In this paper, we use Support Vector Machine to predict the susceptibility of chronic hepatitis from single nucleotide polymorphism data. Our data set consists of SNP data for 328 patients based on 28 SNPs and patients classes(chronic hepatitis, healthy). We use leave-one-out cross validation method for estimation of the accuracy. The experimental results show that SVM with SNP is capable of classifying the SNP data successfully for chronic hepatitis susceptibility with accuracy value of 67.1%. The accuracy of all SNPs with health related feature(sex, age) is improved more than 7%(accuracy 74.9%). This result shows that the accuracy of predicting susceptibility can be improved with health related features. With more SNPs and other health related features, SVM prediction of SNP data is a potential tool for chronic hepatitis susceptibility.

• Journal of Korea Multimedia Society
• /
• v.8 no.11
• /
• pp.1421-1431
• /
• 2005

There are two methods in 3-D sound reproduction: a surround system, like 3.1 channel method and a binaural system using 2-channel method. The binaural system utilizes the sound localization principle of a human using two ears. Generally, a crosstalk between each channel of 2-channel loudspeaker system should be canceled to produce a natural 3-D sound. To solve this problem, it is necessary to trace a head movement. In this paper, we propose a new algorithm to correctly trace the head movement of a listener. The Proposed algorithm is based on the detection of face and eye. The face detection uses the intensity of an image and the position of eyes is detected by a mathematical morphology. When the head of the listener moves, length of borderline between face area and eyes may change. We use this information to the tracking of head movement. A computer simulation results show That head movement is effectively estimated within +10 margin of error using the proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8C
• /
• pp.605-612
• /
• 2008

This paper researches the estimating location using repeater effect adjustment method in CDMA based system. Repeaters are commonly used by commercial and amateur radio operators to extend signals in the radio frequency range from one receiver to another. The repeater signals are increasing arrival time from base station to mobile station. So if we calculates the mobile station using repeater signals, the estimating position error is increased. However nobody researched about adjusting repeater effects. This paper proposes repeater effect adjustment algorithm. For adjusting repeater effects, we make the triangle using mobile station, reference base station and neighbor base station, and then detect the repeater effects using the triangle characteristic. The proposed method system showed the improved performance in estimating parameters and locating positions by computer simulations.

• Journal of Broadcast Engineering
• /
• v.25 no.3
• /
• pp.439-448
• /
• 2020

In this paper, we propose a modified optimization algorithm for point cloud matching of multi-view RGB-D cameras. In general, in the computer vision field, it is very important to accurately estimate the position of the camera. The 3D model generation methods proposed in the previous research require a large number of cameras or expensive 3D cameras. Also, the methods of obtaining the external parameters of the camera through the 2D image have a large error. In this paper, we propose a matching technique for generating a 3D point cloud and mesh model that can provide omnidirectional free viewpoint using 8 low-cost RGB-D cameras. We propose a method that uses a depth map-based function optimization method with RGB images and obtains coordinate transformation parameters that can generate a high-quality 3D model without obtaining initial parameters.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.22-28
• /
• 2017

In modern electronic warfare, a variety of devices are being operated in the fields for the purposes of communication and surveillance. Therefore, if such devices work in the same band, interference may occur and affect each other. Regarding L-band in which various devices including radar systems are operating, interference from existing devices may affect new ones in the band. In this paper, we estimate a probability distribution of the interference environment in L-band from the selected measurement data, which is fundamental for the mathematical analysis. After selecting the candidates of probability distribution, we suggest the best one from the group. The results of this study are expected to be utilized as fundamental data for the mathematical approach to the L-band interference environment.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.79-88
• /
• 1999

In this paper we address the tracking method which tracks only target object in image sequence including moving object. We use a contour tracking algorithm based on intensity and motion boundaries. The motion of the moving object contour in the image is assumed to be well describable by an affine motion model with a translation, a change in scale and a rotation. The moving object contour is represented by B-spline, the position and motion of which is estimated along the image sequence. we use pattern recognition to identify target object. In order to use linear Kalman Filters we decompose the estimation process into two filters. One is estimating the affine motion parameters and the other the shape of moving object contour. In some experiments with dial plate we show that this method enables us to obtain the robust motion estimates and tracking trajectories even in case of including obstructive object.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2230-2250
• /
• 2015

Multiple projectors with partially overlapping regions can be used to project a seamless image on a large projection surface. With the advent of high-resolution photography, such systems are gaining popularity. Experts set up such projection systems by subjectively identifying the types of errors induced by the system in the projected images and rectifying them by optimizing (correcting) the parameters associated with the system. This requires substantial time and effort, thus making it difficult to set up such systems. Moreover, comparing the performance of different multi-projector display (MPD) systems becomes difficult because of the subjective nature of evaluation. In this work, we present a framework to quantitatively determine the quality of an MPD system and any image projected using such a system. We have divided the quality assessment into geometric and photometric qualities. For geometric quality assessment, we use Feature Similarity Index (FSIM) and distance-based Scale Invariant Feature Transform (SIFT). For photometric quality assessment, we propose to use a measure incorporating Spectral Angle Mapper (SAM), Intensity Magnitude Ratio (IMR) and Perceptual Color Difference (ΔE). We have tested the proposed framework and demonstrated that it provides an acceptable method for both quantitative evaluation of MPD systems and estimation of the perceptual quality of any image projected by them.