• 한국의류학회지
• /
• 제37권8호
• /
• pp.1060-1074
• /
• 2013

This study measured and analyzed pressure at each measurement part of imported compression stockings sold in Korea to provide basic information to establish a pressure standard and grade ranking. This study used 40 medical compression stockings imported from 6 countries. Pressure measurements were taken at 11 points: front side and back side of ankle, end-point of the gastrocnemius muscle, front, inner side, back, and outer side of calf, back side of below knew girth, inner side, and outer side of mid-thigh girth, and inner side of thigh girth. AMI 3037-10 and AMI 3037-2 were used for measurements taken inside an environmental chamber at a temperature of $21^{\circ}C$ and a relative humidity (RH) of 65%. For the measurements, 11 air pack sensors were attached to a wooden model leg (Hohenstein) and three measurements were taken at each measurement point in three minutes. The average of these measurements was used for analysis. The findings of this study were as follows. As for the front side of the ankle, of the 40 products, 14 products (6 USA, 2 Swiss, 3 Italian, and 2 Taiwanese) were within the pressure range indicated on the product label; however, no German products fell within the pressure range. A total of 8 products (5 USA, 1 Swiss, 1 Italian, and 1 German) were gradient compression type; however, no Japanese or Taiwanese product were of this type. The majority of products had the highest pressure at the end-point of the gastrocnemius muscle. Only 3 products, 1 USA (Jobst Opaque 30-40mmHg), 1 Swiss (Sigvaris Cotton 34-46mmHg) and 1 Italian (Jobstocking 25-32mmHg), had measurements that met the indicated standard pressure, were a gradient compression type, and met the overall standard for compression stockings.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.45-50
• /
• 1998

Tracheid length, microfibril angle, and compression strength were examined in south and north sides of Pinus koraiensis. The sample tree was 57 years old and had been planted in central Korea. Tracheid length on the south side of the tree ranged from 2.87 to 3.40mm and on the north ranged from 3.60 to 3.53mm and mean values were 3.15 mm for the south and 3.26mm for the north. Tracheid length was 0.11 mm longer on the north side than on the south. Microfibril angle on the south side ranged from $12.6^{\circ}$ to $20.3^{\circ}$ and that on the north from $6.8^{\circ}$ to $13.5^{\circ}$; mean values were $16.6^{\circ}$ on the south side and $9.6^{\circ}$ on the north. Microfibril angle was $7.0^{\circ}$ greater on the south side than on the north side. For compression strength on the south and north sides, significant difference at the 95% level was found only at l.3m above the ground level of the sample tree; for compression limit stress, significant difference at this level was found at 1.3 and 5.3m above the ground level. However, compression strength and compression limit stress were greater on the north side than on the south side.

• 한국응급구조학회지
• /
• 제15권1호
• /
• pp.37-46
• /
• 2011

Purpose : This study is equivalence experiment performed to test practice effects between experimental group from both left and right direction of mannequin and control group having practice from only right direction in cardiopulmonary resuscitation education. Methods : Subject of the research were total 71 elementary and middle school teachers in J province who had not experience to have cardiopulmonary resuscitation. They were divided into experimental group of 35 participants who practiced cardiopulmonary resuscitation from both right and left direction of mannequin on Dec. 27, 2009 and control group of 36 participants who performed cardiopulmonary resuscitation from only right direction of mannequin on Dec. 28, 2009. Collected data were analyzed by SPSS/PC+(version 14.0). Results : 1. There was no statistically significant difference by sex among general characteristics of the subjects. 2. According to the quality of chest compression performed from the right direction of mannequin, experimental group showed better results in proper depth (time), insufficient depth (time), too lowered compression position (time) and inexact position (time) than control group(p<.05). In the quality of chest compression from the left side of mannequin, experimental group performed better results in proper depth (time), insufficient depth (time), inexact compression position (time) and mean chest compression depth(mm) than control group(p<.05) and also in more left-centered compression position (time) than control group(p<.001). 3. The quality of chest compression by experimental group, the right side of mannequin was superior in proper depth (time) to the left side of mannequin (p<.001) and showed better results in insufficient depth (time) and chest compression/recoil rate (p<.05). According to the quality of chest compression by control group, the right side of mannequin showed superior results in proper depth (time), insufficient depth (time), too left-centered compression position (time) and mean chest compression depth (mm) (p<.05) to the left side of mannequin. Conclusion : The group having practice from both right and left sides of mannequin was superior in the quality of chest compression to the group having practice from only right side of mannequin. How to practice cardiopulmonary resuscitation from both right and left sides of mannequin can be recommended and practice from left side of mannequin is also useful.

• Journal of Plant Biology
• /
• 제33권4호
• /
• pp.285-292
• /
• 1990

In order to elucidate the formation of reaction tissues during the transition from primary to secondary growth, the developmental anatomy was conducted in the first internode of Ginkgo biloba seedling in horizontal position. The righting of the horizontal first internode took place at the middle portion and gradually proceeded to the base during the primary growth. Reaction tissues were formed corresponding to the righting movement in the horizontal first internode. During the transition from primary to secondary growth, compression wood was gradually developed on the lower side only. The anatomical features of compression wood also extended longitudinally to the lower side of the vertical portion where it coincided with the lower side of the horizontal first internode occurs acropetally from basal to apical portion. Eventually, some of the anatomical features of compression wood occurred at the primary growth. And the typical compression wood is gradually established during the secondary growth. On the other hand, the lower side tracheid and ray were longer and higher than those of the upper side in the horizontal first internode. However, difference in the width of ray was not observed between the lower and upper sides.

• 정보보호학회논문지
• /
• 제34권3호
• /
• pp.379-392
• /
• 2024

데이터의 급속한 증가와 함께 저장 공간 절약과 데이터 전송의 효율성이 중요한 문제로 대두되면서, 데이터 압축기술의 효율성 연구가 중요해졌다. 무손실 알고리즘은 원본 데이터를 정확히 복원할 수 있지만, 압축 비율이 제한적이며, 손실 알고리즘은 높은 압축률을 제공하지만 데이터의 일부 손실을 수반한다. 이에 딥러닝 기반 압축 알고리즘, 특히 오토인코더 모델이 데이터 압축 분야에서 활발한 연구가 진행됐다. 본 연구에서는 오토인코더를 활용한 새로운 부채널 분석 데이터 압축기를 제안한다. 제안하는 부채널 데이터 대상 압축기는 부채널데이터 특성을 잘 유지할 뿐만 아니라, 기존의 널리 사용되는 Delfate 압축방식 대비 높은 압축률을 보인다. 로컬 연결 레이어를 사용한 인코더는 부채널 데이터의 시점별 특성을 효과적으로 보존하고, 디코더는 멀티 레이어 퍼셉트론을 사용하여 빠른 압축해제 시간을 유지한다. 상관 전력 분석을 통해 제안된 압축기가 부채널 데이터의 특성을 손실 없이 데이터 압축이 가능을 증명하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제13권1호
• /
• pp.3-18
• /
• 1985

한국(韓國)에서는 리기다소나무 (Pinus rigida Miller, pitch pine) 지재(枝材)의 해부학적(解剖學的)인 특성(特性)에 관한 연구(硏究)가 광학현미경적(光學顯微鏡的)인 방법(方法)을 통하여 이(李)에 의하여 1972년(年) 발표(發表)되었다. 본 연구(硏究)에서는 리기다소나무 지재(枝材)의 해부학적(解剖學的)인 특성(特性)에 관한 이(李)의 연구(硏究) 속보(續報)로써 압축이상재(壓縮異常材) (compression wood), 대응재(對應材) (opposite wood) 및 측면재(側面材) (side wood)의 횡단면(橫斷面)과 방사단면(放射斷面)상의 조직학적(組織學的) 특성(特性)을 주사전자현미경(走査電子顯微鏡)을 통하여 비교(比較) 연구(硏究)한 바 얻어진 결과(結果)를 요약(要約)하여 보면 다음과 같다. 1. 압축이상재(壓縮異常材)에 있어서 춘재(春材)로부터 추재(秋材)로의 가도관(假導管) 이행(移行)은 극점(極漸)이며 가도관(假導管)의 배열(排列) 및 크기 역시 거의 균일(均一)한 상태(狀態)를 나타내지만 대응재(對應材) 및 측면재(側面材)에 있어서는 가도관(假導管)의 이행(移行)이 급(急)하며 가도관(假導管)의 배열(排列) 및 크기도 압축이상재(壓縮異常材)의 가도관(假導管)보다 불균일(不均一)하다. 또한 대응재(對應材)의 연륜폭(年輪幅)은 압축이상재(壓縮異常材)나 측면재(側面材)의 연륜폭(年輪幅)보다 좁으며 측면재(側面材)의 횡단면(橫斷面)상 방사조직(放射組織)은 압축이상재(壓縮異常材) 및 대응재(對應材)의 방사조직(放射組織)보다 더 명확(明確)하다. 2. 압축이상재(壓縮異常材)의 가도관(假導管) 특히 춘재(春材) 가도관(假導管)이 둥근 경향(傾向)을 나타내는데 반하여 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)은 다소 모난 모양을 나타낸다. 그리고 세포간극(細胞間隙) (intercellular space), 나선강(螺旋腔) (helical cavity) 및 나선형(螺旋型) (spiral check)이 압축이상재(壓縮異常材)의 춘재(春材) 및 추재(秋材)에 모두 존재하는데 반하여 대응재(對應材)에 있어서는 춘재(春材) 및 추재(秋材) 모두에 존재(存在)하지 않는다. 3. 대응재(對應材) 및 측면재(側面材)에 있어서 추재(秋材) 가도관(假導管)의 막(膜) 두께가 춘재(春材) 가도관(假導管)의 것보다는 더욱 크지만 압축이상재(壓縮異常材)의 추재(秋材) 가도관(假導管)은 그 막(膜)의 두께가 춘재(春材) 가도관(假導管)의 것과 비슷하여 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)과는 달리 압축이상재(壓縮異常材)의 가도관(假導管)에는 2차막(次膜)의 $S_3$ 층(層)이 존재(存在)하지 않는다. 4. 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)과는 달리 압축이상재(壓縮異常材)의 가도관(假導管)은 종종 그 선단부(先端部)가 굴곡(屈曲)되어 있으며 압축이상재(壓縮異常材)의 가도관(假導管)에 존재(存在)하는 유연막공(有緣膜孔)은 대응재(對應材) 및 측면재(側面材)의 것과는 달리 세포막(細胞膜) 내표면(內表面)의 나선상(螺旋狀) (groove)에 존재(存在)한다. 5. 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)의 방사막(放射膜)에 존재(存在)하는 유연막공(有緣膜孔)은 난형(卵形)이지만 압축이상재(壓縮異常材)의 가도관(假導管)의 유연막공(有緣膜孔)은 약간 변형(變形)된 난형(卵形)을 나타낸다. 6. 측면재(側面材)의 춘재(春材)에 있어서 소형(小形) 분야막공구(分野膜孔口)는 둥근 삼각형(三角形)을 나타내며 대형(大形) 분야막공구(分野膜孔口)는 2개의 소형(小形) 분야막공구(分野膜孔口)가 합병(合倂)되어 창상(窓狀)을 나타낸다. 그러나, 대응재(對應材)의 춘재(春材)에 있어서 소형(小形) 분야막공구(分野膜孔口)는 직립(直立)의 난형(卵形)을 그리고 대형(大形) 분야막공구(分野膜孔口)는 평복(平伏)의 난형(卵形)을 나타내며 압축이상재(壓縮異常材)의 분야막공구(分野膜孔口)는 가도관측(假導管側)의 막공연(膜孔緣)으로 인하여 춘재(春材)의 것이 양편 볼록렌즈형(形)을, 추재(秋材)의 것이 슬릿 (slit)형(形)을 나타낸다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2004년도 추계학술발표회 논문집
• /
• pp.82-87
• /
• 2004

Compression ring is a part of LNG storage tank. The main function of the compression ring is connected the roof plate with concrete side wall. End of its one side is embedded in the side concrete wall and the other's connected with the roof plate by welding. It is designed to support stably for all the loads such as self weight of steel roof, inner pressure and concrete weight. We fulfill the FEM analysis to analysis the compression ring behavior during construction. Also we studied the effect of the change of design variables. On the basis of the results, we could introduce a more reasonable design method for compression ring.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.34-40
• /
• 2004

Two different type scramjet models with side-wall compression and top-wall compression inlets have been tested in HPTF (Hypersonic Propulsion Test Facility) under the experimental conditions of Mach number 5.8, total temperature 1700K, total pressure 4.5㎫ and mass flow rate 3.5kg/s. The liquid kerosene was used as main fuel for the scramjets. In order to get fast ignition in the combustor, a small amount of hydrogen was used as a pilot. A strut with alternative tail was employed for increasing the compression ratio and for mixing enhancement in the side-wall compression case. Recessed cavities were used as a flameholder for combustion stability. The combustion efficiency was estimated by one dimensional theory. The uniformity of the facility nozzle flow was verified by a scanning pitot rake. The experimental results showed that the kerosene fuel was successfully ignited and stable combustion was achieved for both scramjet models. However the thrusts were still less than the model drags due to the low combustion efficiencies.

• 한국산림과학회지
• /
• 제78권2호
• /
• pp.119-131
• /
• 1989

본(本) 실험(實驗)은 압축이상재(壓縮異常材)가 잘 형성(形成)된 소나무(Pinus densiflora S. et Z.)의 굽어진 수간(樹幹)과 곧은 지재(枝材) 및 지면(地面)에 노출된 측근(測根)에서 압축이상재율(壓縮異常材率)과 편심율(偏心率)변이에 따른 압축이상재(壓縮異常材)와 대응재(對應材) 및 측면재(側面材)의 조직학적(組織學的) 특성(特性)과 방사조직(放射組織)의 수량적(數量的) 특성(特性)을 조사(調査) 검토(檢討)하고자 실시(實施)하였다. 본(本) 시험(試驗)에서 수간(樹幹)은 지상(地上)에서 수고방향(樹高方向)으로 상승함에 따라, 지재(枝材)는 수간(樹幹)에서 가지방향으로 멀어짐에 따라, 압축이상재율(壓縮異常材率)과 편심율(偏心率)이 줄어드는 경향을 나타내었으므로 20cm간격으로 각각 4개씩의 원판(圓板)을 채취(採取)하여 시편(試片)으로 사용(使用)하였다. 또한 근재(根材)는 압축이상재(壓縮異狀材)가 가장 양호(良好)하게 형성(形成)된 부위(部位)에서 한 개의 원판(圓板)을 채취(採取)하여 사용(使用)하였다. 압축이상재(壓縮異常材)의 조직학적(組織學的) 특성(特性)은 횡단면상(橫斷面上) 가도관(假導管)의 둥근형태(形態), 춘재(春材)로 부터 추재(秋材)로의 매우 점진적(漸進的)인 가도관이행(假導管移行), 가도관선단부의 뒤얽힘 및 나선강(螺旋腔)과 세포간극의 존재 등 측면재(側面材) 및 대응재(對應材)와 다른 특성(特性)을 나타냈으며, 압축이상재율(壓縮異常材率)과 편심율(偏心率)이 작아짐에 따라 압축이상재(壓縮異常材)와 대응재(對應材) 및 측면재간조직학적(側面材間組織學的) 특성(特性)의 차이(差異)가 다소 줄어드는 경향을 보였지만 그 특성(特性)은 유지(維持)됨을 알 수 있었다. 또한 압축이상재(壓縮異常材)의 단위면적 당 수직 수지구수는 대응재(對應材)다 적었으나 단위연륜당 수직수지구의 수는 압축이상재(壓縮異常材)가 대응재(對應材)보다 많았으며 단위면적당 방추형방사조직(紡錘形放射組織)(평균수지구(水平樹脂溝)의 수(數와) 단열방사조직(單列放射組織)의 수(數)는 압축이상재(壓縮異常材)와 대응재(對應材) 및 측면재간(側面材間)에 차이(差異)가 없였다. 그렇지만 압축이상재(壓縮異常材)의 방추형방사조직(紡錘形放射組織)과 단열방사조직(單列放射組織)의 폭(幅)은 대응재(對應材) 및 측면재(側面材)보다 넓으나 이들의 세포고(細胞高)는 낮은 경향(傾向)을 나타내어 이들 방사조직(放射組織)의 폭(幅)과 세포고(細胞高)는 압축이상재(壓縮異常材)의 고유한 특성(特性)이라 생각되었다.

• 에너지공학
• /
• 제24권1호
• /
• pp.1-9
• /
• 2015

Welding defects affect the performance of welded pipe joints. In this study, a three point bend test of welded steel and medium density polyethylene (MDPE) pipe joints with defects of various defect locations and defect materials was studied using the finite element method. The defect was assumed to be located at 12 o'clock, 3 o'clock or 6 o'clock direction. The results showed that pipes failed more easily on the compression side due to stress or local buckling. The air defect was more dangerous than the steel defect if the defect was located in the compression side; otherwise, the defect material effect on the integrity of pipes was ignorable. It is argued that the integrity of pipes with defects in the compression side is weaker than that in other regions, and the defect should be located in the compression side or the 12 o'clock position in the three point bend test to maximize the effect of defect existence on the pipe structural integrity.