• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.6
• /
• pp.394-400
• /
• 2001

This experiment was conducted to determine the safety and feasibility of using compost-promoting-bacteria. Compost-promoting-bacteria was isolated from livestock compost containing sawdust. The isolated bacteria was identified as Bacillus subtilis LYH201 by the method of the composition of the fatty acid with MIDI system and Bergey's manual. This Bacillus subtilis LYH201 had the following characteristics : Gram-positive, straight rod ($0.5{\sim}0.7{\mu}m$ width, $2.5{\sim}3.0{\mu}m$ length), facultatively aerobic and product of xylanase, CMCase, catalase, oxidase, protease and $0.5{\sim}0.7{\mu}m$-amylase. Growth of Bacillus subtilis LYH201 at saccharose as carbon source(0.5%) was faster than other carbon source. Activity of cellulase. $0.5{\sim}0.7{\mu}m$-amylase and protease from Bacillus subtilis LYH201 after 24 hours at $50^{\circ}C$ by agar diffusion method was higher than that of low temperature. Optimum growth condition of Bacillus subtilis LYH201 was $50^{\circ}C$ and pH 6.

• Natural Product Sciences
• /
• v.21 no.2
• /
• pp.93-97
• /
• 2015

The purpose of this study was to develop a new ginseng (Panax ginseng) flower buds extract with the high concentration of ginsenoside Rg3, Rg5, Rk1, Rh1 and F4, the Red ginseng special component. Chemical transformation from the ginseng saponin glycosides to the prosapogenin was analyzed by the HPLC. The ginseng flower buds were processed at the several treatment conditions of the ultrasonication (Oscillator 600W, Vibrator 600W) and vinegar (about 14% acidity). The result of UVGFB-480 was the butanol fraction of ginseng flower buds that had been processed with ultrasonication and vinegar for 480 minutes gained the highest amount of ginsenoside Rg5 (3.548%), Rh1 (2.037%), Rk1 (1.821%), Rg3 (1.580%) and F4 (1.535%). The ginsenoside Rg5 of UVGFB-480 was found to contain 14.3 times as high as ginseng flower buds extracts (GFB, 0.249%).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.1
• /
• pp.62-62
• /
• 2001

The cigarette ventilation affects not only the amount of tar and nicotine delivery by a cigarette, but also the composition of the smoke. Therefore, it is important to stabilize of variability in cigarette ventilation that would be affected by changes in cigarette components. This work was conducted to determine the major factors that influence the cigarette ventilation and also to provide fundamental informations for improving the uniformity of cigarette performances. To evaluate the effect of cigarette ventilation as a dependant variable, the three independent factors were the air permeability of plugwrap, tipping paper and the filter pressure drop. We determined the effect of paper permeability on ventilation variability and the optimum condition in combinations of independent factors. The mean of cigarette ventilation was increased as plugwrap permeability increases, particularly at 26,000 CU. However, it was exhibited that standard deviation and coefficient of variation of the cigarette ventilation were decreased with increasing plugwrap permeability. At the 600 CU and 1,200 CU of tipping paper permeability, process capability index (Cp) of the cigarette ventilation increased as plugwrap permeability increases. Following the optimum condition of cigarette ventilation induced by fitted regression equation, one was to optimize 50% ventilation level is by combination with plugwrap permeability of 16,000 CU, tipping paper permeability of 810 CU, filter pressure drop of 319 mm$H_2O$, respectively.

• Conservation Science in Museum
• /
• v.5
• /
• pp.23-30
• /
• 2004

Buddhist image engraved on the bronze mirror in the Goryo period were conserved in 1986 and 1996, respectively. As the time passed, re-conservation was required that powdered copper corrosion product on the mirror image occurred. Accordingly, additional conservation including stabilization and consolidation were carried out to prevent further corrosion. The powder filled in the line of the buddhist image and the chasing techniques were examined using microscope and portable X-ray fluorescence analyzer. The result showed that composition of powder were gold, silver and calcium(calcite or gypsum). The main chasing techniques used to engrave pattern seemed to be dotted-line, hairline and the kicking-line engraving.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.7
• /
• pp.1180-1185
• /
• 2004

This study was conducted to investigate the optimum conditions for the medium composition after isolating and identifying yeast and lactic acid bacteria from sourdough. It was found that the best quality lactic acid bacterium with acid product and flavor was identified as Leuconostoc species among isolated 115 lactic acid bacteria, the best Quality yeast with good fermentation and flavor was identified as Saccharomyces species among isolated 8 yeast. While the microbial growth with glucose or sucrose as sugar source was good, it was, selected that sucrose which is using commercially is better than glucose. The growth of lactic acid bacterium ; was good with 1％ added sucrose whereas yeast needed more growth. Additionally, the medium for the optimum 1 growth of the yeast was composed of 0.5％ wheat flour, 0.5％ peptone and 3％ sucrose, whereas lactic acid bacterium was composed of 0.5％ wheat flour and 1％ sucrose without peptone.

• Journal of the Korean Institute of Gas
• /
• v.18 no.1
• /
• pp.25-30
• /
• 2014

Mixture of hydrogen and natural gas HCNG mixing equipment production and refueling experiment were performed for supply and product. Hydrogen and CNG in 30 : 70 ratio is mixing of HCNG was performed using ratio control. HCNG refueling method was calculated after reading the pressure of tank for full refuel, amount refuel. Both full refuel and amount refuel results mixed ratio 30 : 70 in the error limits of $H_2{\pm}2%$ met the criterion. HCNG composition analysis result in refueling tank using gas chromatography is satisfying the error limits in refuel tank 30 : 70 ratio were confirmed.

• Journal of Intelligence and Information Systems
• /
• v.7 no.1
• /
• pp.149-159
• /
• 2001

There have been lots of researches for providing a personalized service to a customer using one-to-one marketing and collaborative filtering techniques in E-Commerce. However, there are technical difficulties for providing the recommendation of products far users, which often involve high complexity of computation. In this paper, we have presented an integrated method of classification problem solving method and constraint based configuration techniques. This method can reduce a complexity of computation by classifying a solution domain space that has a higher complexity of composition. Thereafter, we have modeled customers constraints and the components of products to configure a complete system by passing it to constraint processing module in Constraint Satisfaction Problems. Constraint-based configuration uses the constraint propagation using the constraints of buyers and the constraints among PC components to configure a proper product for a customer. We have transformed and applied vector space modeling method in the field of information retrieval to consider a customer satisfaction in addition to the CSP. Finally, we have applied our system to test data fur evaluating a customers satisfaction and performance of the proposed system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.639-647
• /
• 2017

This basic study is focused on the physically removal method of carbon dioxide from the decomposition of ammonium carbarmate to prevent the recombination of ammonium salts. A basic visual experimental set-up was designed and constructed to observe the recombination phenomena from the proper composition of ammonia gas, carbon dioxide gas, and compressed air dilution gas. To quantify the recombination phenomena, a simple device was designed to measure the weight change under severe cases for three different tube sizes. The temperature and pressure in the visual tube and the volumetric flow rates of the nitrogen dilution gas were studied and the conditions to avoid recombination were analyzed according to mean free path theory. Diffusivity values based on the Chapman-Enskog theory were calculated from the experimental data. These value may serve as an index for the prevention of recombination.

• Natural Product Sciences
• /
• v.17 no.4
• /
• pp.342-349
• /
• 2011

This study was performed to determine the composition of phenolic substances contained in the leaves of Cirsium setidens (Compositae), validate the high-performance liquid chromatography (HPLC) method, and determine the in vivo sedative effect of the main component pectolinarin. Six phenolic compounds isolated from C. setidens were spectroscopically identified as chlorogenic acid (1), hyperoside (2), 3,4-di-O-caffeoylquinic acid (3), caffeic acid methyl ester (4), linarin (5), and pectolinarin (6) and then used as standard compounds for HPLC analysis. HPLC proved to be precise, accurate, and sensitive for the simultaneous analysis of the phenolic substances. In particular, six compounds showed good regression ($R^2$ > 0.999) within test ranges and recovery was in the range of 95.4 - 104.8%. The content of pectolinarin was considerably higher (156.48 mg/g) than those of other phenolic substances including the other flavone glycoside, linarin (18.99 mg/g). The contents of other phenolic substances, in order, were chlorogenic acid (8.41 mg/g), 3,4-di-O-caffeoylquinic acid (5.74 mg/g), hyperoside (4.33 mg/g), and caffeic acid methyl ester (0.51 mg/g). Oral administration with compound 6 (10 and 20 mg/kg) enhanced the sleeping time induced by pentobarbital in mice, indicating that it has a sedative effect.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.141-145
• /
• 2007

Due to their excellent catalytic activity with respect to methanol oxidation on platinum at low temperature, platinum nanosized catalysts have been a topic of great interest for use in direct methanol fuel cells (DMFCs). Since pure platinum is readily poisoned by CO, a by-product of methanol electrooxidation, and is extremely expensive, a number of efforts to design and characterize Pt-based alloy nanosized catalysts or Pt nanophase-support composites have been attempted in order to reduce or relieve the CO poisoning effect. In this review paper, we summarize these efforts based upon our recent research results. The Pt-based nanocatalysts were designed by chemical synthesis and thin-film technology, and were characterized by a variety of analyses. According to bifunctional mechanism, it was concluded that good alloy formation with $2^{nd}$ metal (e.g., Ru) as well as the metallic state and optimum portion of Ru element in the anode catalyst contribute to an enhanced catalytic activity for methanol electrooxidation. In addition, we found that the modified electronic properties of platinum in Pt alloy electrodes as well as the surface and bulk structure of Pt alloys with a proper composition could be attributed to a higher catalytic activity for methanol electooxdation. Proton conducting contribution of nanosized electrocatalysts should also be considered to be excellent in methanol electrooxidation (Spillover effect). Finally, we confirmed the ensemble effect, which combined all above effects, in Pt-based nanocatalsyts especially, such as PtRuRhNi and $PtRuWO_{3}$, contribute to an enhanced catalytic activity.