• Composites Research
• /
• v.20 no.6
• /
• pp.1-7
• /
• 2007

Expanded graphite/carbon fiber hybrid conductive polymer composites were fabricated by the preform molding technique. The conductive fillers were mechanically mixed with a phenol resin to provide an electrical property to composites. The conductive filler loading was fixed at 60wt.% to accomplish a high electrical conductivity. Expanded graphites were excellent in forming a conductive networking by direct contacts between them while it was hard to get the high flexural strength over 40MPa with using only expanded graphite and phenol resin. In this study, carbon fibers were added in composites to compensate the weakened flexural strength. The effect of carbon fibers on the mechanical and electrical properties was examined according to the weight ratio of carbon fiber. As the carbon fiber ratio increased, the flexural strength increased until the carbon fiber ratio of 24wt.%, and then decreased afterward. The electrical conductivity gradually decreased as the increase of the carbon fiber ratio. This was attributed to the non-conducting regions generated among the carbon fibers and the reduction of the direct contact areas between expanded graphites.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.38.1-38.1
• /
• 2021

Dust polarization depends on the physical and mechanical properties of dust, as well as the properties of local environments. To understand how dust polarization varies with grain mechanical properties and the local environment, in this paper, we model the wavelength-dependence polarization of starlight and polarized dust emission by aligned grains by simultaneously taking into account grain alignment and rotational disruption by radiative torques (RATs). We explore a wide range of the local radiation field and grain mechanical properties characterized by tensile strength. We find that the maximum polarization and the peak wavelength shift to shorter wavelengths as the radiation strength U increases due to the enhanced alignment of small grains. Grain rotational disruption by RATs tends to decrease the optical-near infrared polarization but increases the ultraviolet polarization of starlight due to the conversion of large grains into smaller ones. In particular, we find that the submillimeter (submm) polarization degree at 850㎛(P850) does not increase monotonically with the radiation strength or grain temperature (Td), but it depends on the tensile strength of grain materials. Our physical model of dust polarization can be tested with observations toward star-forming regions or molecular clouds irradiated by a nearby star, which have higher radiation intensity than the average interstellar radiation field. Finally, we compare our predictions of the P850-Td relationship with Planck data and find that the observed decrease of P850 with Td can be explained when grain disruption by RATs is accounted for, suggesting that interstellar grains unlikely to have a compact structure but perhaps a composite one. The variation of the submm polarization with U (or Td)can provide a valuable constraint on the internal structures of cosmic dust

• Journal of Industrial Convergence
• /
• v.21 no.11
• /
• pp.147-154
• /
• 2023

This study aimed to investigate the relationship between the general characteristics of adolescents and their mental health in relation to experiences of heavy drinking. The research utilized raw data from the 18th Youth Health Behavior Online Survey (2022), focusing on 530 participants who reported experiencing heavy drinking in the past 30 days. The study applied weighted composite sample analysis, incorporating frequency, chi-square test, and logistic regression to examine the data. According to the research findings, experiences of heavy drinking showed statistically significant differences across variables such as gender, academic achievement, economic status, sexual experience, and smoking. Additionally, among the mental health characteristics, stress perception, depression, loneliness, suicidal thoughts, suicide planning, and suicide attempts were identified as influencing factors on heavy drinking experiences. These results underscore the need for prevention programs addressing alcohol consumption habits, considering the mental and physical health of adolescents. Developing programs that take into account the relationship between mental health and drinking habits can contribute to forming healthy lifestyle habits during adolescence.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.103-111
• /
• 2012

One of the basic physical properties of the hardened cement paste, the rigidity, is deteriorated during concrete matrix forming, depending on the replacement rate of the crushed stone powder, and due to drying shrinkage. Therefore, the concrete containing crushed stone powder has been limitedly used as non-structural construction material. To improve these disadvantages, a hydrothermal reaction employing method can be considered. High-temperature and high-pressure water is involved in the hydrothermal reaction in the mixing with specific materials. The rigidity improving mechanism is related to the synthesis of calcium silicate. The calcium silicate is produced through reaction between calcium compounds and the silicic acid. Various kinds of calcium silicate can be produced depending on the CaO/$SiO_2$ mole ratio, the temperature of the hydrothermal synthesis, the pressure, and the reaction time. The product of the synthesis mechanism, tobermorite crystal, plays a pivotal role for the rigidity reinforcement. The crushed stone powder, analyzed in this study, contains 50 to 60% of $SiO_2$ and 10 to 20% $Al_2O_3$. The composite rate is appropriate to create the tobermorite crystal through formation of hardened cement matrix under the hydrothermal synthetic conditions and with the CaO in the cement. Moreover, further reinforcement was promoted using the property of material under the identical density through promoting the formation of tobermorite crystal.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.188-195
• /
• 2020

This study is aimed to evaluate and compare the surface roughness and microbial adhesion to alkasite restorative material (Cention N), resin-modified glass ionomer (RMGI), and composite resin. And to examine the correlation between bacterial adhesion and surface roughness by different finishing systems. Specimens were fabricated in disk shapes and divided into four groups by finishing methods (control, carbide bur, fine grit diamond bur, and white stone bur). Surface roughness was tested by atomic force microscope and surface observation was performed by scanning electron microscope. Colony forming units were measured after incubating Streptococcus mutans biofilm on specimens using CDC biofilm reactor. Cention N surface roughness was less than 0.2 ㎛ after finishing procedure. Control specimens of resin and Cention N specimens were significantly (p = 0.01) rougher. Pearson correlation coefficient (PCC = 0.13) indicated a weak correlation between surface roughness and S. mutans adhesion to the specimens. Compared with resin specimens, RMGI and Cention N showed lower microbial adhesion. Surface roughness and bacterial adhesion were not significantly different, regardless of the finishing systems.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.6
• /
• pp.491-497
• /
• 2001

Polymethylmethacrylate(PMMA) is currently commonly used material for the reconstruction of bone defects and fixation of joint prosthetics following congenital and acquired causes. Although PMMA has widespread use, it does not possess the ideal mechanical characteristics with osteoconductivity and osteoinductivity required. In order to overcome these problem, addition of bovine bone drived defatting demineralized bone(BDB) powders to a PMMA bone cement was done for improvement of physical property and bone forming characteristics of composite. In order to investigate the influence of BDB reinforcement on the PMMA, we measured physical property of compressive, tensile, flexural strength, and scanning electron microscopic examinations. The results were obtained as follows: 1. The PMMA forms a solid cellular matrix with open cells about $100{\mu}m$ in variable size and incorporating BDB. BDB aggregates inside the cells form a porous network that is accessible from the outer surface. 2. The physical properties were compressive strength of mean $22.74{\pm}1.69MPa$, tensile strength of mean $22.74{\pm}1.69MPa$, flexural strength of mean $77.53{\pm}6.93MPa$. Scanning electron microscopic examinations were revealed that there was DBD particles form a highly porous agglomerates. BDB can be added PMMA in the form of dried powders, the composites are applicable as bone substitutes. BDB and PMMA mixture is shown to produce a class of composites that due to their microstructure and improved mechanical properties may be suitable for application as bone subsitutes. The mechanical and material properties of the BDB-PMMA bone substitute composites are competitive with those properties of a porous ceramic matrix of other hydroxyapatite and with those of natural bones.

• The Journal of the Petrological Society of Korea
• /
• v.22 no.4
• /
• pp.251-261
• /
• 2013

Hwagae area, which is situated in the southeastern part of the Jirisan province, Yeongnam massif, Korea, is mainly composed of Precambrian Jirisan metamorphic rock complex (JMRC). Lithofacies distribution of the Precambrian constituent rocks mainly shows NS-trending tight fold and EW-trending open fold. This paper researched deformational phased structural characteristics of JMRC based on the geometric and kinematic features and the forming sequence of multi-deformed rock structures, and suggests that the geological structure of this area was formed through at least three phases of ductile deformation. (1) Most of structural elements related to the $D_1$ deformation were recognized as $S_{0-1-2}$ composite foliation which was transposed by the $D_2$ deformation. (2) The $D_2$ deformation occurred under the EW-directed tectonic compression, and formed the NS-trending $F_2$ fold and $D_2$ ductile shear zone which is (sub)parallel to the axial plane of $F_2$ fold. (3) The $D_3$ deformation occurred under the NS-directed tectonic compression, and partially reoriented the pre-$D_3$ structural elements into ENE or WNW direction. It indicates that the distribution of Precambrian lithofacies showing NS and EW-trending folds in the Hwagae area is closely associated with the $D_2$ and $D_3$ deformations, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.189-200
• /
• 1989

The purpose of this study was to investigate the muscle activity of the group function occlusion and the changed canine guided occlusion using EM2. In this study, 13 subjects with group function occlusion and without temporomandibular disorders were selected, each subject was changed to the canine guided occlusion by forming the lingual ramps in the upper canines with light curing composite resin. The muscle activities of the anterior temporal and masseter muscle were recorded in the group function occlusion and immediately, one week, and two weeks after changing to the canine guided occlusion under the condition of maximum voluntary clenching in centric occlusion, lateral excursion, and during gum chewing. The results were as follows: 1. In case of maximum voluntary clenching in centric occlusion, the muscle activities of the anterior temporal and masseter muscle of working and balancing side didn't show any difference immediately after changing to the canine guided occlusion, one week after changing to the canine guided occlusion, one week after changing to it the muscle activities of the anterior temporal masseter muscle of working and balancing side were increased significantly, and two weeks after changing to it the muscle activities of the masseter muscle were increased significantly in comparison with the group function occlusion. 2. In case of maximum voluntary clenching in lateral excursion, the muscle activities of the anterior temporal and masseter muscle of working and balancing side were reduced significantly immediately after changing to the canine guided occlusion, one week after changing to it the muscle activities of the anterior temporal muscle of balancing side and of the anterior temporal and masseter muscle of working side were reduced significantly, and 2 weeks after changing to it the muscle activities of the anterior temporal and masseter muscle of working side were reduced significantly in comparison with the .group function occlusion. 3. During gum chewing, the muscle activities of the anterior temporal and masseter muscle of working and balancing side didn't show any difference immediately after changing to the canine guided occlusion, one week after changing to it the muscle activities of the masseter muscle of working and balancing side were increased significantly, and two weeks after changing to it only the muscle activities of masseter muscle of working side were increased significantly.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.4
• /
• pp.247-252
• /
• 2013

Pit and fissure sealant prevents biofilm accumulation, plays a role in forming a barrier to acidic substance made by the bacteria. The Surface reaction-type pre-reacted glass ionomerI(S-PRG) filler was developed in 1999. S-PRG filler releases fluoride continuously and does not decompose under wet conditions. The aim of this study was to test the microleakage and anticariogenic effect to adjacent enamel of S-PRG filler-containing pit and fissure sealant. Sound premolars and molars were used in this study. A S-PRG filler-containing pit and fissure sealant, Beautisealant$^{(R)}$(Shofu, Japan) was used for this experiment, the composite resin sealant Concise$^{(R)}$(3M ESPE, USA) was used as control. For the microleakage test, all teeth surface were double coated with finger nail varnish, with the exception of a 1.0 mm window around the restoration margins. The teeth were immersed in 2% methylene blue solution for 24 hours and then rinsed in tap water. For the anticariogenic effect evaluation, all tooth were immersed in artificial carious solution for 9 days and rinsed with tap water. Each tooth was embedded in orthodontic acrylic rein and subsequently sectioned longitudinally in a bucco-lingual direction with a low-speed diamond saw. The cut sections were examined using a stereomicroscope. Differences in microleakage between the two groups were not different significantly. But the S-PRG filler-containing pit and fissure sealant showed higher anticariogenic effect than that of flowable resin sealant.

• Composites Research
• /
• v.12 no.5
• /
• pp.31-39
• /
• 1999

Glass-fiber reinforced polymeric composites provide the desitable properties of high stiffness and strength as well as specific weight. Hence, they have become some of the most important materials in several industries. These composites can be grouped into thermoplastic and thermoset composites, with thermoplastic composites having several advantages over thermoset composites in mechanical properties and processing. As a result, the study of the material behavior and forming techniques of such composites has attracted considerable attention in recent years. When the continuous fiber-reinforced polymeric composites are molded by flow molding, the molded parts leads to be nonhomogeneity and anisotropic because of the separation and orientation of fibers. As the characteristics of the products are greatly dependent on the separation, it is very important to clarify the separation in relarion to molding conditions, fiber mat structures and mold geometry. In this study, the effects of the mold geometry and the fiber mat structure on the compression moldability are studied using the cup-type molding.