• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.501-508
• /
• 2001

Free vibration analysis of multi-delaminated composite beam-columns subjected to axial compression load is performed in the present study. In order to investigate the effects of multi-delaminations on the natural frequency and elastic buckling load of multi-delaminated beam-columns, the general kinematic continuity conditions are derived from the assumption of constant slope and curvature at the multi-delamination tip. Characteristic equation of multi-delaminated beam-column is obtained by dividing the global multi-delaminated beam-columns into segments and by imposing recurrence relation from the continuity conditions on each sub-beam-column. The natural frequency and elastic buckling load of multi-delaminated beam-columns according to the incremental load of axial compression, which is limited to the maximum elastic buckling load of sound laminated beam-column, are obtained. It is found that the sizes, locations and numbers of multi-delaminations have significant effect on natural frequency and elastic buckling load, especially the latter ones.

• Structural Engineering and Mechanics
• /
• 제4권3호
• /
• pp.243-255
• /
• 1996

This paper presents a model of a layered, delaminated composite beam. The beam is modelled by beam finite elements, and the delamination is modelled by additional boundary conditions. In the present study, the laminated beam contains only one delaminated region through the thickness direction which extends to the full width of the beam. It is also assumed that the delamination is open. The influence of the delamination length and position upon changes in the bending natural frequencies of the composite laminated cantilever beam is investigated.

• Structural Engineering and Mechanics
• /
• 제25권5호
• /
• pp.501-518
• /
• 2007

In this work, a new approach is developed for dynamic analysis of a composite beam with an interply crack, based on finite element solution of partial differential equations with the use of the COMSOL Multiphysics package, allowing for fast and simple change of geometric characteristics of the delaminated area. The use of COMSOL Multiphysics package facilitates automatic mesh generation, which is needed if the problem has to be solved many times with different crack lengths. In the model, a physically impossible interpenetration of the crack faces is prevented by imposing a special constraint, leading to taking account of a force of contact interaction of the crack faces and to nonlinearity of the formulated boundary value problem. The model is based on the first order shear deformation theory, i.e., the longitudinal displacement is assumed to vary linearly through the beam's thickness. The shear deformation and rotary inertia terms are included into the formulation, to achieve better accuracy. Nonlinear partial differential equations of motion with boundary conditions are developed and written in the format acceptable by the COMSOL Multiphysics package. An example problem of a clamped-free beam with a piezoelectric actuator is considered, and its finite element solution is obtained. A noticeable difference of forced vibrations of the delaminated and undelaminated beams due to the contact interaction of the crack's faces is predicted by the developed model.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.83-89
• /
• 2000

Dynamic characteristics of multi-delaminated composite beams are presented in this work. In order to investigate the effects of sizes, locations and types of delaminations on composite beams, the general kinematic governing equations are derived and solved by dividing the delaminated beam and imposing the continuity conditions into each sub-beam The results show dynamic behaviors are varied according to the sizes, types and locations of delaminations through the laminated composite beams. It is shown that the effects of delaminations on the dynamic characteristics of composite beams could be used to detect their sizes, types and locations from the results.

• Steel and Composite Structures
• /
• 제33권5호
• /
• pp.653-661
• /
• 2019

In this paper aeroelastic behavior of 3-phase nano-composite beam-plate with double delaminations is investigated. It is tried to study the effect of carbon nano-tubes (CNTs) on critical flutter pressure of reinforced damaged nano-composite structures. In this case, the CNTs are appending to the polymer matrix uniformly. The Eshelby-Mori-Tanaka model is used to obtain the effective material properties of 3-phase nano-composite beam-plate. To investigate the aeroelastic behavior of delaminated beam-plate subjected to supersonic flow, it is assumed that the damaged segments are forced to vibrate together. The boundary conditions and auxiliary conditions at edges of delaminated segments are used to predict critical flutter pressure. The influence of CNTs and different delamination parameters such as delamination length, axial position and its position through thickness are investigated on critical flutter pressure.

• 한국전산구조공학회논문집
• /
• 제15권3호
• /
• pp.523-534
• /
• 2002

본 논문에서는 축방향 압축하중을 받는 다퐁간분리된 적층 보-기둥의 자유진동과 좌팔에 대한 해석을 수행하였다. 다층간분리된 적층 보-기둥의 고유진동수와 탄성 좌굴 하중에 대한 층간분리의 영향을 조사하기 위해 층간분리의 양단에서 기울기와 곡률이 일정하다는 가정을 적용하여 일반적인 운동학적 연속 조건을 유도하였다. 전체 다층간분리된 보-기둥을 부분으로 분할하고, 연속조건에 따른 반복관계를 각 하부 보-기둥에 부과함으로써 다층간분리된 보-기둥의 특성방정식을 구하였다. 축방향 증분 압축 하중에 따른 다층간분리된 보-기둥의 고유진동수와 탄성 좌굴 하중을 구하였으며 이는 손상되지 않은 적층 보-기둥의 최대 탄성 좌굴 하중에 한정된다 연구를 통하여 층간분리의 크기, 위치, 수가 고유진동수와 특히 탄성 좌굴 하중에 큰 영향을 미치는 것을 알 수 있었다.

• 한국강구조학회 논문집
• /
• 제13권3호
• /
• pp.233-244
• /
• 2001

본 연구에서는 다층 층간분리된 복합보의 휨강성 감소를 고찰하였다. 휨강성 감소를 평가하기 위해서 이론해석을 수행하였다. 층간분리가 복합보에 휨강성 감소에 주는 영향을 고찰하기 위해서 지배운동방정식이 유도되었고, 층간분리된 각각의 분할보는 연속조건을 이용한 반복관계를 이용하여 구해졌다. 복합적층보에 층간분리가 여러 층에서 발생한 경우에 대해 다양한 적층순서와 여러 가지 형태의 층간분리 형상으로 모델링하여 결과를 비교하였다. 다층 층간분리가 존재하는 적층복합보의 휨강성을 평가하는데 있어서 본 연구는 유용하게 활용될 수 있다.

• Steel and Composite Structures
• /
• 제18권5호
• /
• pp.1119-1127
• /
• 2015

A finite-element model for beams with partially delaminated layers is used to investigate their behavior. In this formulation account is taken of lateral strains and the first-order shear deformation theory is used. Both displacement continuity and force equilibrium conditions are imposed between the regions with and without delamination. Numerical results of the present model are presented and its performance is evaluated for static and dynamic problems.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.91-103
• /
• 2017

Generalized fractal dimension is used to detect the presence of partial delamination in a composite laminated beam. The effect of boundary conditions and location of delamination on the fractal dimension curve is studied. Appropriability of higher mode shape data for detection of delamination in the beam is evaluated. It is shown that fractal dimension measure can be used to detect the presence of partial delamination in composite beams. It is found that the torsional mode shape is well suited for delamination detection in beams. First natural frequency of delaminated beam is found to be higher than the healthy beam for certain small and partial width delaminations and some boundary conditions. An explanation towards this counter intuitive phenomenon is provided.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.167-174
• /
• 2016

Recently laminated plates like composite materials has been used in a various field to grow the specific strength of the composition. However, delamination area caused by barely visible impact damage has potential risk that it can raise buckling of the delaminated plate. Because it can interrupt compressive behavior of laminated plates and reduce their strength, the whole structure can't be constituted by these materials. Many studies assume that behavior of the delaminated plate which is in lamanated plates equals theoretical buckling but their actual motion doesn't coincide because of initial imperfections of materials like deflection, residual stress, eccentricity and so on. In this paper, we change laminated plates with initial delamination into a beam of rectangular cross section with the initial crack and analyze compressive behavior according to initial imperfections through finite element method(FEM). Consequently analysis results show that behavior of laminated plates involving delamination differs from ideal buckling of the delaminated plate in actual conditions and we can predict its motion through imperfections relationship.