• Journal of Industrial Convergence
• /
• v.20 no.12
• /
• pp.79-85
• /
• 2022

Recently, a smartphone manufactured on a flexible substrate has been released as an electronic device, and research on a stretchable electronic device is in progress. In this paper, a silicon-based stretchable material is made and used as a substrate to implement and evaluate an optical sensor device using oxide semiconductor. To this end, a substrate that stretches well at room temperature was made using a silicone-based solution rubber, and the elongation of 350% of the material was confirmed, and optical properties such as reflectivity, transmittance, and absorbance were measured. Next, since the surface of these materials is hydrophobic, oxygen-based plasma surface treatment was performed to clean the surface and change the surface to hydrophilicity. After depositing an AZO-based oxide film with vacuum equipment, an Ag electrode was formed using a cotton swab or a metal mast to complete the photosensor. The optoelectronic device analyzed the change in current according to the voltage when light was irradiated and when it was not, and the photocurrent caused by light was observed. In addition, the effect of the optical sensor according to the folding was additionally tested using a bending machine. In the future, we plan to intensively study folding (bending) and stretching optical devices by forming stretchable semiconductor materials and electrodes on stretchable substrates.

• Computers and Concrete
• /
• v.33 no.5
• /
• pp.497-507
• /
• 2024

In squat reinforced concrete walls, the displacement capacity for lateral deformation is low and the ability to resist the axial load can quickly be lost, generating collapse. This work consists of testing two squat reinforced concrete walls. One of the specimens is built with conventional detailing of reinforced concrete walls, while the second specimen is built applying an alternative design, including stirrups along the diagonal of the wall to improve its ductility. This solution differs from the detailing of beams or coupling elements that suggest building elements equivalent to columns located diagonally in the element. The dimensions of both specimens correspond to a wall with a low aspect ratio (1:1), where the height and length of the specimen are 1.4 m, with a thickness of 120 mm. The alternative wall included stirrups placed diagonally covering approximately 25% of the diagonal strut of the wall with alternative detailing. The walls were tested under a constant axial load of 0.1f'cAg and a cyclic lateral displacement was applied in the upper part of the wall. The results indicate that the lateral strength is almost identical between both specimens. On the other hand, the lateral displacement capacity increased by 25% with the alternative detailing, but it was also able to maintain the 3 complete hysteretic cycles up to a drift of 2.5%, reaching longitudinal reinforcement fracture, while the base specimen only reached the first cycle of 2% with rapid degradation due to failure of the diagonal compression strut. The alternative design also allows 46% more energy dissipation than the conventional design. A model was used to capture the global response, correctly representing the observed behavior. A parametric study with the model, varying the reinforcement amount and aspect ratio, was performed, indicating that the effectiveness of the alternative detailing can double de drift capacity for the case with a low aspect ratio (1.1) and a large longitudinal steel amount (1% in the web, 5% in the boundary), which decreases with lower amounts of longitudinal reinforcement and with the increment of aspect ratio, indicating that the alternative detailing approach is reasonable for walls with an aspect ratio up to 2, especially if the amount of longitudinal reinforcement is high.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.1
• /
• pp.37-42
• /
• 2024

This paper suggests polynomial time algorithm for cutwidth minimization problem that classified as NP-complete because the polynomial time algorithm to find the optimal solution has been unknown yet. To find the minimum cutwidth CW_f(G)=max_𝜈∈_VCW_f(𝜈)for given graph G=(V,E),m=｜V｜, n=｜E｜, the proposed algorithm divides neighborhood N_G[𝜈_i] of the maximum degree vertex 𝜈_i in graph G into left and right and decides the vertical cut plane with minimum number of edges pass through the vertex 𝜈_i firstly. Then, we split the left and right N_G[𝜈_i] into horizontal sections with minimum pass through edges. Secondly, the inner-section vertices are connected into line graph and the inter-section lines are connected by one line layout. Finally, we perform the optimization process in order to obtain the minimum cutwidth using vertex moving method. Though the proposed algorithm requires O(n²) time complexity, that can be obtains the optimal solutions for all of various experimental data

• Korean Journal of Ichthyology
• /
• v.36 no.1
• /
• pp.20-29
• /
• 2024

Hemitripterus villosus, a promising aquaculture fish species, is facing declining stocks. This study aims to provide normative standards for skeletal development to address persistent skeletal deformities in farmed fish. Specimens utilized in the study underwent artificial insemination with captured fish, and the resulting larvae and fry were preserved in a formalin solution. The skeletal ossification process commenced immediately after hatching, affecting the parasphenoid, premaxillary, maxillary, and dentary structures at an average total length of 13.65±0.71 mm (n=5). By sixty-five days post-hatching, ossification extended to the ethmoid and supraorbital, completing the head's development at an average total length of 21.24±0.50 mm (n=5). Clavicle ossification occurred at seven days post-hatching, corresponding to an average total length of 14.61±0.52 mm (n=5). At forty-four days post-hatching, the ossification of 4 actinosts took place, completing the shoulder girdle, with an average total length of 18.15±0.61 mm (n=5). Vertebral ossification initiated at ten days post-hatching, with an average total length of 14.80±0.65 mm (n=5). By fifty-four days post-hatching, 39 vertebral columns were ossified, reaching an average total length of 18.67±0.54 mm (n=5). Vertebral development was complete at sixty days post-hatching, with an average total length of 20.25±0.45 mm (n=5). This study sheds light on the skeletal development of H. villosus, providing valuable standards and fundamental data for understanding skeletal deformities in this species.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.4
• /
• pp.333-339
• /
• 2003

A new mineral, Zn analogue of rancieite (Chimooite), has been discovered at the Dongnam mine, Korea. It occurs as compact subparallel fine­grained flaky or acicular aggregates in the massive manganese oxide ores which were formed by supergene oxidation of rhodochrosite­sulfide ores in the hydrothermal veins trending NS­N25E and cutting the Pungchon limestone of the Cambrian age. The flakes of chimooite are 0.2 mm for the largest one, but usually less than 0.05 mm. The acicular crystals are elongated parallel to and flattened on (001). This mineral shows gradation to rancieite constituting its marginal part, thus both minerals are found in one and the same flake. Color is bluish black, with dull luster and brown streak in globular or massive aggregates. Cleavage is perfect in one direction. The hardness ranges from 2.5 to 4. Under reflected light it is anisotropic and bireflectant. It shows reddish brown internal reflection. Chemical analyses of different parts of both minerals suggest that rancieite and chimooite constitute a continuous solid solution series by cationic substitution. The empirical chemical formula for chimooite has been calculated following the general formula, $R_2_{x}$ M $n^{4+}$$_{9­x}$ $O_{18}$ $.$n$H_2O$ for the 7 $\AA$ phyllomanganate minerals, where x varies from 0.81 to 1.28 in so far studied samples, thus averaging to 1.0. Therefore, the formula of Zn­rancieite is close to the well­known strochiometric formula $_Mn_4^{4+}$ $O_{9}$ $.$4$H_2O$. The mineral has the formula (Z $n_{0.78}$N $a_{0.15}$C $a_{0.08}$M $g_{0.01}$ $K_{0.01}$)(M $n^{4+}$$_{3.98}$F $e^{3+}$$_{0.02}$)$_{4.00}$ $O_{9}$ $.$3.85$H_2O$, thus the ideal formula is (Zn,Ca)M $n^{4+}$$_4$ $O_{9}$ $.$3.85$H_2O$. The mineral has a hexagonal unit ceil with a=2.840 $\AA$ c=7.486 $\AA$ and a : c = 1 : 2.636. The DTA curve shows endothermic peaks at 65, 180, 690 and 102$0^{\circ}C$. The IR absorption spectrum shows absorption bands at 445, 500, 1630 and 3400 c $m^{1}$. The mineral name Chimooite has been named in honour of late Prof, Chi Moo Son of Seoul National University.ity.versity.ity.y.

• Asian Journal of Turfgrass Science
• /
• v.22 no.2
• /
• pp.185-196
• /
• 2008

This Study was conducted to evaluate the effect of liquid fertilizer containing medium of on growth of shoot and root in creeping bentgrass (Agrostis palustris Huds. cv. Pennlixs). According to application method of liquid fertilizer, the experiment plot was designed as follows; NF : non-fertilizer; CF : compound fertilizer(21-17-17) only; T500, T300, T100 : compound fertilizer +liquid fertilizer solution diluted 500, 300, 100 folds, respective; L500 : only liquid fertilizer solution which contained the medium of Lactobacillus confusa and Pichia anomala diluted 500 folds. The every treatments was arranged by a completely randomized complete block designs with three replications. The order of turf qualities like leaf color index and chlorophyll content in treatments showed T500 T300 T100 $\geq$ CF > NF. In treatment applied with compound fertilizer, the dry weight of shoot increased by about 13% in T500, T300 and T100 than CF, and that of root about 25% in just T300. Dry weight of shoot and root increased by 88% and 44% in L500 than NF, respectively. As compared with CF, T/R ratio in T500, T300 and T100 increased by 20%, 11% and 21%, respectively and root length 7%, 8% and 3%. In comparison with NF, T/R ratio and root length in L500 increased by 39% and 74%. These results suggested that the application of liquid fertilizer containing medium of Lactobacillus confusa and Pichia anomala induced the development of turf quality and growth by promoting root growth in creeping bentgrass.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.263-275
• /
• 2014

It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

• Journal of KIISE:Databases
• /
• v.28 no.4
• /
• pp.742-757
• /
• 2001

Since database management systems(DBMSS) have limited lock resources, transactions requesting locks beyond the limit mutt be aborted. In the worst carte, if such transactions are aborted repeatedly, the DBMS can become paralyzed, i.e., transaction execute but cannot commit. Lock escalation is considered a solution to this problem. However, existing lock escalation methods do not provide a complete solution. In this paper, we prognose a new lock escalation method, adaptive lock escalation, that selves most of the problems. First, we propose a general model for lock escalation and present the concept of the unescalatable look, which is the major cause making the transactions to abort. Second, we propose the notions of semi lock escalation, lock blocking, and selective relief as the mechanisms to control the number of unescalatable locks. We then propose the adaptive lock escalation method using these notions. Adaptive lock escalation reduces needless aborts and guarantees that the DBMS is not paralyzed under excessive lock requests. It also allows graceful degradation of performance under those circumstances. Third, through extensive simulation, we show that adaptive lock escalation outperforms existing lock escalation methods. The results show that, compared to the existing methods, adaptive lock escalation reduces the number of aborts and the average response time, and increases the throughput to a great extent. Especially, it is shown that the number of concurrent transactions can be increased more than 16 ~256 fold. The contribution of this paper is significant in that it has formally analysed the role of lock escalation in lock resource management and identified the detailed underlying mechanisms. Existing lock escalation methods rely on users or system administrator to handle the problems of excessive lock requests. In contrast, adaptive lock escalation releases the users of this responsibility by providing graceful degradation and preventing system paralysis through automatic control of unescalatable locks Thus adaptive lock escalation can contribute to developing self-tuning: DBMSS that draw a lot of attention these days.

• Sim-seong Yeon-gu
• /
• v.26 no.2
• /
• pp.149-188
• /
• 2011

This thesis presents the research of analytical psycholoy in respect of Jindo Dasiraegi. In a funeral of Jindo, situated in the southern island of Korea, there is a theatrical performance which is called Dasiraegi(rebirth). This research manifested a basic, universal meaning of psychological approach related the implicit of death in performing theatre from a analytic psychological point of view. The characteristics of this theatrical feast are like these ; 1) funeral festival 2) entrance of clown(the existence of antipole and conflict) 3) eroticism 4) active participation of female character 5) difficulty in her delivery 6) the moment of joy thanks to childbirth. The prerequisite of this feast should be a propitious mourning of person dying old and rich. That is, after having a complete life, it could be an entire death. Three main roles in Dasiraegi ; a bat-blind buddhist devotee, a strolling actor teasing men, an apostate monk, theses characters lock horns in a form of triangle conflict relations, then they keep a balance with a fake mourner as a protagonist , modulator and narrator. These characters are indeed clowns who manifested a metaphor as a decent, sacred and reasonable part of shadow regards group consciousness. The alive and the deceased, mourner and fake mourner, piety and confusion, wail and laugh, silence and grumble, death and birth, diverse antipole all coexist then theses are in harmony. The blind devotee and the monk are in antipole, the entertainer(anima) provokes a conflict between them. The infant is a solution as same as a result of conflict. This conflict seems to be eased by birth of a baby which is a symbol of wholeness(ganzheits) but the conflict of antipole is reenacted as insisting his parental right so this solution is leaving the baby to the chief mourner who is fourth character and the first beginning. Unconsciousness, hereby, is negotiating with appeared reality. The Images in unconsciousness are conscious and this new energy in unconsciousness is proceeding towards consciousness, then it became a therapeutic power for the loss of consciousness. Dasiraegi is the play of consolation much more for the alive than the deceased. The death signified not a loss but a resurrection and this intends a transition of new leading independent role for the alive. These make us have more prudent consideration concern the double sense of renewal for the dead and the alive. It is preserved as only a form of drama on stage after disappearance of Dasiraegi in a funeral recently. Dasiraegi was a manifestation of unconsciousness for compensation about the unilateral attitude of group consciousness to the strict death excessively. Therefore, this will enable reflect the relativeness and the attitude which regards the death as the end today.

• Journal of Intelligence and Information Systems
• /
• v.25 no.4
• /
• pp.35-52
• /
• 2019

As public services are provided in various forms, including e-government, the level of public demand for public service quality is increasing. Although continuous measurement and improvement of the quality of public services is needed to improve the quality of public services, traditional surveys are costly and time-consuming and have limitations. Therefore, there is a need for an analytical technique that can measure the quality of public services quickly and accurately at any time based on the data generated from public services. In this study, we analyzed the quality of public services based on data using process mining techniques for civil licensing services in N city. It is because the N city's building license complaint service can secure data necessary for analysis and can be spread to other institutions through public service quality management. This study conducted process mining on a total of 3678 building license complaint services in N city for two years from January 2014, and identified process maps and departments with high frequency and long processing time. According to the analysis results, there was a case where a department was crowded or relatively few at a certain point in time. In addition, there was a reasonable doubt that the increase in the number of complaints would increase the time required to complete the complaints. According to the analysis results, the time required to complete the complaint was varied from the same day to a year and 146 days. The cumulative frequency of the top four departments of the Sewage Treatment Division, the Waterworks Division, the Urban Design Division, and the Green Growth Division exceeded 50% and the cumulative frequency of the top nine departments exceeded 70%. Higher departments were limited and there was a great deal of unbalanced load among departments. Most complaint services have a variety of different patterns of processes. Research shows that the number of 'complementary' decisions has the greatest impact on the length of a complaint. This is interpreted as a lengthy period until the completion of the entire complaint is required because the 'complement' decision requires a physical period in which the complainant supplements and submits the documents again. In order to solve these problems, it is possible to drastically reduce the overall processing time of the complaints by preparing thoroughly before the filing of the complaints or in the preparation of the complaints, or the 'complementary' decision of other complaints. By clarifying and disclosing the cause and solution of one of the important data in the system, it helps the complainant to prepare in advance and convinces that the documents prepared by the public information will be passed. The transparency of complaints can be sufficiently predictable. Documents prepared by pre-disclosed information are likely to be processed without problems, which not only shortens the processing period but also improves work efficiency by eliminating the need for renegotiation or multiple tasks from the point of view of the processor. The results of this study can be used to find departments with high burdens of civil complaints at certain points of time and to flexibly manage the workforce allocation between departments. In addition, as a result of analyzing the pattern of the departments participating in the consultation by the characteristics of the complaints, it is possible to use it for automation or recommendation when requesting the consultation department. In addition, by using various data generated during the complaint process and using machine learning techniques, the pattern of the complaint process can be found. It can be used for automation / intelligence of civil complaint processing by making this algorithm and applying it to the system. This study is expected to be used to suggest future public service quality improvement through process mining analysis on civil service.