• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.274-277
• /
• 2001

This research was conducted as a part of continuous development of a bioprocess to treat thiocyanate($SCN^-$) in the leachate from an industrial landfill site. Detailed characteristics of the leachate, physical and chemical, was analyzed in this study. Time to reach equilibrium in $SCN^-$ degradation at different temperature, similar to the annual variation. was investigated for posssible adaptation of the bioprocess in the treatment site. Complete mineralization of $SCN^-$ to ammonia. bicarbonate and sulfate at all temperature range with except $5^{\circ}C$ trial was observed with different time elapsed to reach equilibrium. which shortened as the process of Fill-Draw proceeded. The final metabolites were mainly nitrate and sulfate. No fouling odor was detected and the settling characteristic of the biomass after the treatment was good(i.e., sludge volume index(SVI) ${\le}$80). Using MWT sludge as an inoculum showed better performance with respect to the elapsed time for treatment and sedimentation characteristics than those of using 2BET sludge.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.389-392
• /
• 1999

Fatigue is a process of progressive permanent internal structural change in a material subjected to repeitive stresses. These change may be damaging and result in progressive growth of cracks and complete fracture if the stress repetitins are sufficiently large. For structural members subjected to cyclic loads, the continuous and irrecoverable damage processes are taking place. These processes are referred as the cumulative damage processes due to fatigue loading. Moreover, increased use of high strength concrete makes the fatigue problem more important because the cross-section and dead weight are reduced by using high strength concrete. The purpose of this study is to investigate the shear fatigue behavior of reinforced concrete beams according to shear reinforcement ratio and concrete compressive strength under repeated loadings. For this purpose, comprehensive static and fatigue tests of reinforced concrete beams were conducted. The major test variables for the fatigue teats are the concrete strength and the amount of shear reinforcements. The increase of deflections and steel strains according to load repetition has been plotted and analyzed to explore the damage accumulation phenomena of reinforced concrete beams. An analytical model for shear fatigue behavior has been introduced to analyze the damage accumulation under fatigue loads. The failure mode and fatigue lives have been also studied in the present study. The comparisons between analytical results and experimental data show good correlation.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.325-333
• /
• 2004

To ensure competitiveness in the modern automotive market, material arrangements and information managements should be performed concurrently with new car developments. In automotive general assembly shops, thus, new business workflow and supporting environments are inevitable to reduce the manufacturing preparation time in developing a new car in the manner of concurrent and collaborative engineering. Since complete material arrangements for a whole general assembly system is a huge and complex job, several planners should execute their planning jobs and share information. Therefore, each planner should provide others with his/her results with continuous on-line communication and cooperation. Digital automotive general assembly factory is useful the performing concurrent and collaborative engineering and is essential for material arrangements and information managements systems. In this research, we constructed a sophisticated digital factory of an automotive general assembly shop by measuring and modeling through the parametric 3-D CAD, and a web-based system for concurrent and collaborative material arrangements for automotive general assembly via 3D mock-up is developed. By the digital general assembly shop and developed web-based system, savings in time and colt of manufacturing preparation activities are possible, and the reliability of the planning result Is greatly improved.

• Applied Microscopy
• /
• v.20 no.1
• /
• pp.65-76
• /
• 1990

The effect of calcium-free reperfusion for 5, 10, and 15 minutes, respectively, followed by continuous reperfusion with normal Tyrode solution containing 1.0mM calcium chloride, after global ischemia in the isolated perfused guinea pig heart by Langendorff techniques was examined with transmission electron microscope. Compared to the nomal Tyrode solution-perfused control hearts, the 5 minute calcium-free-reperfused hearts showed loss or thickening of Z lines, focal sarcolemmal disruption, mitochondrial swelling, clumping of chroma-tin, intracellular fluid accumulation, and some separation of cell junctions, especially the fasciae adherentes. These changes became more severe in the hearts of 10 minute calcium-free reperfusion. Subsarcolemmal larger bleb and near complete separation of cell junctions were noticed. In the 15 minute calcium-free-reperfused hearts, irreversible ultrastructural changes including contraction bands, biazrre mitochondria, and sarcolemmal destruction were widely distributed. The severity of myocardial changes were in accordance with the duration of calcium-free reperfusion. These changes indicate that calcium-free reperfusion regardless of its duration could not salvage the post-ischemic myocardium probably due to development of calcium paradox.

• Archives of Plastic Surgery
• /
• v.43 no.1
• /
• pp.88-92
• /
• 2016

There are two general categories of lateral osteotomy techniques-the external perforating method and the internal continuous method. Regardless of which technique is used, procedural effectiveness is hampered by limited visualization in the surgical field. Considering this point, we devised a new technique that involves using a wide subperiosteal dissection and internal perforation under direct visualization. Using an intranasal approach, whereby the visibility of the intended fracture line was maintained, enabled a greater degree of control, and in turn, results that were more precise, and thus predictable and reproducible. Traditionally, it has been taken as dogma that the periosteum must be preserved, considering the potential for dead space and bony instability; however, under sufficient visualization of the surgical field with an internal perforating method, complete osteotomy with fully preserved intranasal mucosa could be conducted exactly as intended. This intact mucosal lining compensates for the elevated periosteum. Compressive dressing and drainage through a Silastic angio-needle catheter enabled the elimination of dead space. Therefore, precise, reproducible, and predictable osteotomy minimizing the potential for associated complications such as ecchymosis, that is, bruising owing to hemorrhage, could be performed. In this article, we introduce a novel technique for lateral osteotomy with improved visualization.

• Parasites, Hosts and Diseases
• /
• v.43 no.4 s.136
• /
• pp.141-147
• /
• 2005

A practical and convenient method of rearing Eucyclops serrulatus in a microculture environment is described. A complete life cycle of E. serrulatus was maintained in a narrow space on a microscope slide glass on which a cover glass of $22{\times}40mm$ in size was mounted at a height of 0.8mm. The culture medium was constituted by bottled mineral water boiled with grains of Glycine max (soybean). Chilomonas paramecium, a free-living protozoan organism, was provided as live food. Growth of nauplii hatched from eggs to the first stage of copepodite took an average of 7.7 days, and the growth of copepodite 1 to the egg-bearing adult female took an average of 20.1 days in the microculture cell with an average life time of 44.7 days. Continuous passage of cope pods was successfully maintained as long as sufficient medium and food were provided. The microculture method enables an in situ microscopic observation on the growth and developmental process of helminth larvae experimentally infected to copepods as well as of copepod itself. Furthermore, it does not require anesthetization and, therefore, minimize the amount of stress exposed to cope pods during the handling process.

• Plant Biotechnology Reports
• /
• v.2 no.3
• /
• pp.213-218
• /
• 2008

Swertia chirata is an endangered gentian species that prefers to grow at higher altitudes. This ethnomedicinal herb is known primarily for its bitter taste caused by the presence of important phytochemicals that are directly associated with human health benefits. Due to a continuous loss of habitat and inherent problems of seed viability and seed germination, alternative strategies for propagation and conservation are urgently required to prevent the possible extinction of this species. We have formulated a reproducible protocol for the rapid propagation and conservation of this plant using leaves taken from in vitro shoot cultures. Direct induction of more than seven shoot buds per explant was achieved for the first time when the explants were placed on MS medium supplemented with $2.22{\mu}M$ N-6-benzyladenine, $11.6{\mu}M$ kinetin, and $0.5{\mu}M$ ${\alpha}-naphthalene$ acetic acid. Direct organogenesis was noted exclusively from the adaxial surface of the basal segments of leaves. Leaves closer to the apical meristem were more responsive than those farther away from the meristem. Plants raised through direct organogenesis were evaluated for their clonal fidelity by chromosomal analysis and DNA fingerprinting. Complete plants were successfully transferred to the field condition and produced viable seeds. Given the enormous potential of this age-old medicinal plant in terms of potential health-benefitting drugs, this protocol can be used for commercial propagation purposes and to initiate future genetic improvement studies.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1551-1564
• /
• 2016

The high penetration level of inverter-based distributed generation (DG) power plants is challenging the low-voltage ride-through requirements, especially under unbalanced voltage sags. Recently, a flexible injection of both positive- (PS) and negative-sequence (NS) reactive currents has been suggested for the next generation of grid codes. This can enhance the ancillary services for voltage support at the point of common coupling (PCC). In light of this, considering distant grid faults that occur in a mainly inductive grid, this paper proposes a complete voltage support control scheme for the interface inverters of medium or high-rated DG power plants. The first contribution is the development of a reactive current reference generator combining PS and NS, with a feature to increase the PS voltage and simultaneously decrease the NS voltage, to mitigate voltage imbalance. The second contribution is the design of a voltage support control loop with two flexible PCC voltage set points, which can ensure continuous operation within the limits required in grid codes. In addition, a current saturation strategy is also considered for deep voltage sags to avoid overcurrent protection. Finally, simulation and experimental results are presented to validate the effectiveness of the proposed control scheme.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.420-426
• /
• 2006

Korean prior studies on smart clothing seeking complete mixture of clothing and computer with diverse functions in the ubiquitous environment were so mere, while there have been aggressive activities to develop diverse smart clothing products led by the relevant industries and universities in foreign countries. Given prospective growth of the smart clothing market, there should be customers' evaluation of functions and utility of and sensitivity to smart clothing as well. This study conducted a questionnaire to Korean customers in their twenties regarding their perception and liking of and willingness to use smart clothing, and examined the needs of new functions of smart clothing. As a result, the customers in their twenties turned out to like well-designed and comfortable clothing, and be exposed to diverse and continuous computing environment. Also, they have relatively low perception but considerably high liking of smart clothing, indicating their high willingness to use smart clothing products. They cited 'selectable functions' and 'mobile and convenient ' as merits, and 'too expensive' and 'easy to wash' as demerits of smart clothing. In the respect, they proposed many interesting smart clothing ideas, such as 'clothing with automatic temperature-sensing function, which gets higher heat- insulating function by tightening the textile structure in winter and higher ventilating function by loosening the textile structure in summer.' We hope the results of this study will serve basic data for development of more efficient smart clothing in the future.

• IE interfaces
• /
• v.16 no.3
• /
• pp.375-381
• /
• 2003

To ensure competitiveness in the modern automotive market, process planning should be performed concurrently with new car developments. In automotive general assembly shops, thus, new business workflows and supporting environments are inevitable to reduce the manufacturing preparation time in developing a new car in the manner of concurrent and collaborative engineering. Since complete process planning for a whole general assembly system is a huge and complex job, several process planners should execute their planning jobs and share information. Therefore, each planner should provide others with his/her results with continuous on-line communication and cooperation. In this research, a web-based system for concurrent and collaborative process planning for automotive general assembly is developed. By using this system, savings in time and cost of assembly process planning are possible, and the reliability of the planning result is improved.