• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.532-540
• /
• 2014

It is necessary to measure the current of rotor for controlling the active and reactive power generated by the stator side of the doubly fed induction generator (DFIG) system. There are offset and scaling errors in the current measurement. The offset and scaling errors cause one and two times current ripples of slip frequency in the synchronous reference frame of vector control, respectively. This paper proposes a compensation method to reduce their ripples. The stator current is variable according to the wind force but the rotor current is almost constant. Therefore input of the rotor current is more useful for a compensation method. The proposed method adopts the synchronous d-axis current of the rotor as the input signal for compensation. The ripples of the measurement errors can be calculated by integrating the synchronous d-axis stator current. The calculated errors are added to the reference current of rotor as input of the current regulator, then the ripples are reduced. Experimental results show the effectiveness of the proposed method.

• 대한전자공학회논문지SP
• /
• 제43권2호
• /
• pp.12-18
• /
• 2006

이 논문은 저해상도 동영상에서 자동화된 방식으로 한 장의 좋은 화질의 고해상도 영상을 얻는 방안을 제시한다. 여러 장의 저해상도 영상을 이용하여 고해상도 영상을 얻는 방법이 한 장의 저해상도 영상만을 이용하는 전통적인 보간 방법에 비해 좋은 결과를 보이기 위해서는 입력 영상들이 공통된 고해상도 격자에 잘 정합되어야 하므로, 정합오차를 충분히 고려하여 입력영상들을 주의 깊게 선택한다. 본 논문에서는 움직임 보상된 저해상도 영상들로부터 얻어진 통계적 특성을 활용하여 입력 영상 후보들의 입력 영상으로서의 적합성을 평가한다. 고해상도 영상획득모델로부터 움직임 보상오차의 최대값을 추정한다. 입력 영상 후보의 움직임 보상오차가 추정된 움직임 보상오차의 최대값보다 크면 입력 영상후보는 선정에서 제외된다. 선정된 적절한 유효 입력 영상 후보의 수와 움직임 보상오차의 통계치를 고려하여 최종 입력 영상들을 선별한다. 입력 영상 선별부에서 최종적으로 선별된 입력 영상들은 뒤따르는 고해상도 영상복원부로 입력된다. 제안된 방식은 사용자의 간섭없이 저해상도 동영상에서 효과적으로 입력 영상들을 선별하여 좋은 화질의 고해상도 영상을 얻는 응용에 사용될 것으로 기대된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.560-562
• /
• 2002

The liquid crystal(LC) pixel capacitance Clc, which varies as a function of applied pixel voltage, is a main factor of pixel voltage errors on input gamma voltage, and therefore of the electro-optics(E-O) characteristics of LC pixel for a-Si TFT LCDs. The pixel voltage error(${\Delta}$Vp) for input gamma voltage was simulated for 14.1 inch diagonal XGA panel. An agreement between the experimental results and simulation was satisfactory for the gamma voltage compensation, ${\Delta}$Vp of the input gamma voltage. The proposed compensation method was successfully introduced to a 14.1 inch diagonal XGA panel, and a remarkable improvement of image sticking was achived.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.859-862
• /
• 1998

An offset compensation scheme for rail-to-rail CMOS op-amps with complementary input stages is presented. Two auxiliary amplifiers are used to compensate for the offsets of NMOS and PMOS differnetial input stages, and ping-pong control is employed for continuous-time operation. Simulation and measurements resutls show that offsets are reduced about 20 times by this scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.24-24
• /
• 2000

This paper proposes a design method of sliding mode observer for SISO linear systems with a disturbance input. We first construct an observer with a constant gain matrix, a feedforward injection map and an external feedforward compensation signal input. Using the second Lyapunov method, we present a sufficient condition for the existence of sliding mode observer. The proposed observer guarantees that the state error trajectories enter a certain region in finite time and remain inside thereafter.

• 대한전자공학회논문지
• /
• 제25권12호
• /
• pp.1610-1617
• /
• 1988

In this paper, a robust discrete-time adaptive control with compensation is proposed for single-input single-output discrete-time plants which have unmodeled dynamics. The stability of the overall system is studied using the conic sector stability theorems when a normalized constant gain parameter adaptation algorithm and a properly chosen compensation are used. An illustrative exmple shows that this compensation can also increase the parameter adaptation speed. And a method of compensation using the adaptive observation is also discussed.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1055-1079
• /
• 2014

Substructure shake table testing is a class of real-time hybrid simulation (RTHS). It combines shake table tests of substructures with real-time computational simulation of the remaining part of the structure to assess dynamic response of the entire structure. Unlike in the conventional hybrid simulation, substructure shake table testing imposes acceleration compatibilities at substructure boundaries. However, acceleration tracking of shake tables is extremely challenging, and it is not possible to produce perfect acceleration tracking without time delay. If responses of the experimental substructure have high correlation with ground accelerations, response errors are inevitably induced by the erroneous input acceleration. Feeding the erroneous responses into the RTHS procedure will deteriorate the simulation results. This study presents a set of techniques to enable reliable substructure shake table testing. The developed techniques include compensation techniques for errors induced by imperfect input acceleration of shake tables, model-based actuator delay compensation with state observer, and force correction to eliminate process and measurement noises. These techniques are experimentally investigated through RTHS using a uni-axial shake table and three-story steel frame structure at the Johns Hopkins University. The simulation results showed that substructure shake table testing with the developed compensation techniques provides an accurate and reliable means to simulate the dynamic responses of the entire structure under earthquake excitations.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권7호
• /
• pp.325-331
• /
• 2001

A dynamic anti-windup method for state delayed control systems with input saturation is considered. Under the assumption that a linear controller has been designed for a state delayed control system based on the existing design technique which shows desirable nominal performance, an additional compensator is incorporated to provide a graceful performance degradation despite of input saturation. By regarding the difference of the controller states in the absence and presence of input saturation as an objective function, the dynamic compensator which minimizes it is determined explicitly. The proposed dynamic compensator is the closed form of plant and controller parameters. The proposed method not only provides graceful performance degradation, but it also guarantees the total stability of resulting systems. An illustrative example is provided to show the effectiveness of the proposed method.

• 한국해양공학회지
• /
• 제13권3B호
• /
• pp.91-98
• /
• 1999

In order to reject the steady-state tracking error, it is common to introduce integral compensators in servosystems for constant reference signals. However, if the mathematical model of the plant is exact and no disturbance input exists, the integral compensation is not necessary. From this point of view, a two-degree-of-freedom(2DOF) servosystem has been proposed, in which the integral compensation is effective only when there is a modeling error or a disturbance input. The present paper considers a synthesis problems of this 32DOF servosystem with direct transfer term in the system representation. And, a method how we may obtain a gain such that desirable transient response is achieved, is proposed in the presence of the modelling error and disturbance input.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.237-240
• /
• 2000

A new control method using average comparison strategy have been proposed in this paper. This control method realizes sinusoidal input and output current. unity input displacement factor regardless of load power factor. Moreover compensation of the asymmetrical and harmonic containing input voltage is sautomatically realized and calculation time of control function is reduced.