• Computers and Concrete
• /
• 제10권4호
• /
• pp.391-407
• /
• 2012

Utilization of supplementary cementing materials (SCM) by the cement industry, as a highly promising solution of sustainable cement development aiming to reduce carbon dioxide emissions, necessitates a more thorough evaluation of these types of materials on concrete durability. In this study a comparative assessment of the effect of SCM on concrete durability, of every cement type as defined in the European Standard EN 197-1 is taking place, using a software tool, based on proven predictive models (according to performance-related methods for assessing durability) developed and wide-validated for the estimation of concrete service life when designing for durability under harsh environments. The effect of Type II additives (fly ash, silica fume) on CEM I type of cement, as well as the effect of every Portland-composite type of cement (and others) are evaluated in terms of their performance in carbonation and chloride exposure, for a service life of 50 years. The main aim is to portray a unified and comprehensive evaluation of the efficiency of SCM in order to create the basis for future consideration of more types of cement to enter the production line in industry.

• Korean Journal of Acupuncture
• /
• 제27권2호
• /
• pp.159-181
• /
• 2010

Objectives : The purpose of this study is to introduce and examine the possibilities of infrared (IR) imaging, biophoton detection and gas discharge visualization(GDV) as diagnostic tools in Korean Medicine. Methods : To review the basic mechanism and measurement methods of three modalities, concepts in physics were introduced. Physical backgrounds of IR, biophoton and GDV were briefly explained based on recent research papers. Simple electronics was employed for relevant detectors. In order to find the relation between Korean Medicine and these methods, papers on their applications were reviewed. Opinions from the experts on each modality were obtained from their papers and private communications. Results and Conclusions : IR imaging has been used as an auxiliary diagnostic tool but there are some rooms for the improvement for clinical applications. Experimental confirmation of the meridian activation by a moxa cigar is necessary for its verification. Biophoton is not correlated with human skin temperature but it has a circadian rhythm. Biophoton and GDV have a negligible relation if any. Therefore there are no correlations among three modalities in terms of basic mechanisms. But their clinical relations are yet to be scrutinized. Biophoton and GDV need more rigorous clinical tests before they can be used as diagnostic tools.

• 가정과삶의질연구
• /
• 제23권3호
• /
• pp.53-62
• /
• 2005

In this study, we challenge recent apocalyptic rhetoric about idle, burdensome, and dependent older people. Our primary objective is to examine and compare the productive activities of older adults in both Korea and Canada using a broader definition of productivity that included household work. Another objective is to identify and compare the factors related to the participation of household work of older adults in both countries. In order to conduct a comparative culture study two data sets were used; one was the 1999 Survey of Time Use collected by Korean Statistics Office and the other was 1998 Survey of Time Use collected by Canadian Statistics Office. Many countries have been collected a time use survey and used to study labor, welfare, and culture. Total number of 17,730 Korean and 2,729 Canadian between when and 84 were included to analyze the data. It is clear from the results that older people engage in productive behaviors, particularly when the definition of activities is broadened to include unpaid work. However, it is also clear the productive contributions in terms of household work ale lower among older Koreans than among older Canadians.

• 한국식품영양과학회지
• /
• 제28권3호
• /
• pp.586-592
• /
• 1999

Microwave assisted extraction(MAE) is known as a more environmental friendly process with economic advantages in terms of less time, less solvent, less energy and less wastes than the current time consuming reflux method. It was applied to develop a rapid extraction method for soluble ginseng components that are major materials used for the processing of ginseng products. In a comparative study between pre established MAE(ethanol 60%, power 80 W, process time 4 min$\times$5) and current extraction method(ethanol 80%, temp. 85oC, time 8 hr$\times$5), MAE was more efficient than the current method to obtain an extract yield(soluble solid), but it was insufficient to extract individual ginsenosides, total phenols, reducing components and acidic polysaccharides. MAE with 80% ethanol by 5 times showed, however, that its extraction efficiency on soluble solid, crude saponin, major ginsenosides, and the other components was equal or superior to that of the current method, indicating that ethanol concentration is one of the critical parameters influencing the MAE process. The quality of ginseng extracts from MAE was assured by evaluating the corresponding standards and by comparing TLC and HPLC patterns with the control.

• Carbon letters
• /
• 제27권
• /
• pp.72-80
• /
• 2018

In the present work, a comparative study of the mechanical behavior of two series of elastomeric composites, based on carboxylated styrene butadiene rubber (X-SBR) and reinforced with rice bran carbon (RBC) and graphite, is reported. Hybrid composites of X-SBR filled with RBC-graphite were also investigated in terms of the cure characteristics, hardness, tensile properties, abrasion resistance, and swelling. It was observed that the cure times decreased with the incorporation of a carbon filler whereas the torque difference, tensile strength, tensile modulus, hardness, and swelling resistance increased compared to the neat X-SBR revealing a favorable characteristic of crosslinking. Dynamic rheological analysis showed that the G' values of the composites, upon the addition of RBC-graphite, were changed to some extent. This demonstrates that the presence of a strongly developed network of fillers will ensure a reinforcing characteristic in a polymer matrix.

• 대한방사선기술학회지:방사선기술과학
• /
• 제20권2호
• /
• pp.34-43
• /
• 1997

There are 4 types of equipment in diagnostic radiography. These are single phase, three phase, inverter type and condenser type X-ray generators. It is very confusing to make an adequate exposure factor and to know the usage of different type of X-ray generators. In this experiment, I explored a comparative study of outputs in 4 different type of X-ray units. I expect that this experiment could be helpful for manufacturer to make both the X-ray equipment better, In terms of Ideal exposure factors, thereby reducing the patient dose. Experimental results are as follow : 1) X-ray output The ratio of X-ray output of single, three phase and inverter type of X-ray generator was 1 : 1.6 : 2 without absorber and 1 : 2 : 2.6 with 20 mm aluminium absorber. 2) Beam quality The X-ray beam quality of single phase generator was proved to be softer than three phase and inverter type of generators by 0.4 mmAL and 0.55 mmAl HVL respectively. 3) Reproducibility Linearity of X-ray output Retroducibility of X-ray output met the regulation below CV 0.05 and linearity also met the regulation below 0.1 in 4 types of diagnostic X-ray generators. 4) The comparison of incident dose Three phase X-ray generator was 20% higher than two other X-ray generators in radiation dose to make same film density.

• 신재생에너지
• /
• 제5권4호
• /
• pp.60-65
• /
• 2009

The present study was conducted for a comparative evaluation of wet and dry floor heating systems using geothermal heat pump. We circulated hot water from geothermal heat pump which is $10{\sim}15^{\circ}C$ lower than that from boiler. In order to access indoor temperature ($25^{\circ}C$) it took 74 minutes for dry type and 247 minutes for wet type. Average floor temperature was $23.9^{\circ}C$ for wet type and $32.7^{\circ}C$ for dry type. Energy saving rate gradually increased by 66% after 138 minutes. As a result, in case of floor heating system using low temperature circulation water, dry type was more practicable for stable floor heating than wet type in terms of floor temperature and access time to indoor set temperature.

• 한국측량학회지
• /
• 제17권3호
• /
• pp.311-320
• /
• 1999

본 연구에서는 두만강 하류지역 다분광 TM영상의 변환기법과 그에 대한 감독분류방법을 비교 분석하였다. 총체적 분류 정확도는 최대우도법이 높으며 식생은 MNF와 TC 변환 영상에서 비교적 좋은 분류 결과를 얻을 수 있다. MNF, TC, NDVI 등 영상들로 구성된 7차원 영상은 3차원 영상보다 좋은 결과를 나타내며 그 중에서도 최대우도법의 분류 결과가 제일 좋았다. 다분광 영상은 두만강 지역 경제 개발 계획과 산업 입지 선정에 중요한 기초자료로 활용될 수 있다.

• 한국지형학회지
• /
• 제24권3호
• /
• pp.133-147
• /
• 2017

This study investigated the cases of relative location, especially focused on the geomorphological situation, for the conceptualization of the location knowledge. In order to perform this study, first of all, I approached meaning of location. In this study I used the terms 'site' and 'situation'. 'Site' as used here means the location of a given place with its local internal features or resources. 'Situation' refers to the location of place as related to other places. As to location, no place exists in isolation. Therefore, it is necessary to look beyond the internal nature of the area itself to perceive its external relations with other areas. The examples of geomorphological situation were focused on the scale linkage of the examples, the interaction between elements of earth surface processes, and the method of comparative region. The regions of examples were the landscape of Mt. Hymalaya to Bengal deep sea fan, the climatical difference of continental east and west, the landscape of Mt. Geum & Sangju beach, the landscape of the south and north face of Mt. Mai., Hamjibaakgol asymmetrical valley, and the landscape of inland sea and outer sea type island.

• International Journal of Computer Science & Network Security
• /
• 제21권8호
• /
• pp.35-42
• /
• 2021

In the current context of digitalization of education, the use of modern methods and techniques of data analysis and processing in order to improve students' school results has a very important role. In our paper, we aimed to perform a comparative study of the classification performances of AdaBoost, SVM, Naive Bayes, Neural Network and kNN algorithms to classify the results obtained at the Baccalaureate by students from a college in Suceava, during 2012-2019. To evaluate the results we used the metrics: AUC, CA, F₁, Precision and Recall. The AdaBoost algorithm achieves incredible performance for classifying the results into two categories: promoted / rejected. Next in terms of performance is Naive Bayes with a score of 0.999 for the AUC metric. The Neural Network and kNN algorithms obtain scores of 0.998 and 0.996 for AUC, respectively. SVM shows poorer performance with the score 0.987 for AUC. With the help of the HeatMap and DataTable visualization tools we identified possible correlations between classification results and some characteristics of data.