• 대한기계학회논문집B
• /
• 제25권6호
• /
• pp.799-803
• /
• 2001

Miniature heat pipe(MHP) with woven-wired wick was used to cool the CPU of a notebook PC. The pipe with circular cross-section was pressed and bent for packaging the MHP into a notebook PC with very limited compact packaging space. A cross-sectional area of the pipe is reduced about 30% as the MHP with 4mm diameter is pressed to 2mm thickness. In the present study a performance test has been performed in order to review varying of operating performance according to pressed thickness variation and heat dissipation capacity of MHP cooling module that is packaged on a notebook PC. New wick type was considered for overcoming low heat transfer limit when MHP is pressed to thin-plate. The limiting thickness or pressing is shown to be within the range of 2mm∼2.5mm through the performance test with varying the pressing thickness. When the wall thickness of 0.4mm is reduced to 0.25mm for minimizing conductive thermal resistance through the wall of heat pipe, heat transfer limit and thermal resistance of MHP were improved about 10%. In the meantime, it is shown that the thermal resistance and heat transfer limit for the MHP with central wick type are higher than those of MHP with existing wick types. The results of performance test for MHP cooling modules with woven-wired wick to cool a notebook PC shows the stability as cooling system since T(sub)j(Temperature of Processor Junction) satisfy a demand condition of 0∼100$\^{C}$ under 11.5W of CPU heat.

• 대한전자공학회논문지TC
• /
• 제38권5호
• /
• pp.23-31
• /
• 2001

본 논문에서는 제한된 웨이퍼 공간을 효율적으로 사용하기 위해서, 여파기의 크기를 소형화시키고 스커트 특성을 향상시킨 다중 결합 선로 공진기를 제안하였다. 다중 결합 선로 공진기는 반 파장 개방 선로를 여러 번 구부린 형태로서 공진기의 크기를 소형화시키고, 각 선로의 상호 인덕턴스 성분에 의해서 공진기와 공진기 사이의 결합력을 감소시킬 수 있었다. 다중 결합 선로 공진기를 이용하여 공진기 사이 거리에 따른 결합 계수와 급전 위치에 따른 external Q를 구해서 12폴 여파기를 설계하였다. 중심 주파수 1.79 GHz, 3 dB 대역폭 7.62 MHz로 제작된 고온초전도 여파기는 통과 대역의 아래쪽에서 70 dB/MHz, 위쪽에서 41 dB/MHz의 가파른 스커트 특성을 보이고 있다.

• 대한수학회보
• /
• 제31권2호
• /
• pp.187-192
• /
• 1994

The author extended the small properties of topological semilattices to that of regular semigroups [3]. In this paper, it could be shown that a semigroup S is almost regular if and only if over bar RL = over bar R.cap.L for every right ideal R and every left ideal L of S. Moreover, it has shown that the Bohr compactification of an almost regular semigroup is regular. Throughout, a semigroup will mean a topological semigroup which is a Hausdorff space together with a continuous associative multiplication. For a semigroup S, we denote E(S) by the set of all idempotents of S. An element x of a semigroup S is called regular if and only if x .mem. xSx. A semigroup S is termed regular if every element of S is regular. If x .mem. S is regular, then there exists an element y .mem S such that x xyx and y = yxy (y is called an inverse of x) If y is an inverse of x, then xy and yx are both idempotents but are not always equal. A semigroup S is termed recurrent( or almost pointwise periodic) at x .mem. S if and only if for any open set U about x, there is an integer p > 1 such that x$^{p}$ .mem.U.S is said to be recurrent (or almost periodic) if and only if S is recurrent at every x .mem. S. It is known that if x .mem. S is recurrent and .GAMMA.(x)=over bar {x,x$^{2}$,..,} is compact, then .GAMMA.(x) is a subgroup of S and hence x is a regular element of S.

• 대한공간정보학회지
• /
• 제17권2호
• /
• pp.91-99
• /
• 2009

지형공간정보 분야에서 대상물의 3차원 형상에 대한 자료는 기본 자료로 취급되고 있다. 특히, 공간에 관련하여 계획, 유지, 관리 등을 업무를 수행하기 위해서는 다양한 물리적 형상 정보가 필요하다. 종래의 사진측량은 고가의 측량용 카메라와 숙달된 전문가가 운용하는 해석도화기를 이용하여 수행되어 왔으나 최근에는 수치사진측량의 발달로 인하여 저가의 비측량용 디지털 카메라를 이용해 컴퓨터 환경에서 수행하는 것이 가능해졌다. 본 연구에서는 비측량용 디지털 카메라를 이용한 근거리 사진측량에 의해 신속하게 3차원 형상정보를 생성하기 위한 기술을 연구하고, 이를 지형공간정보 분야에 적용할 수 있도록 함으로써, 지형공간정보 분야에서 필요로 하는 3차원 형상에 대한 정보의 취득을 원활하게 하는 것을 목적하였다. 비측량용 카메라 중에서 보급형 컴팩트 디지털 카메라를 사용하고 대상물 내의 단 하나의 길이 성분만을 관측하여 대상물의 3차원 형상을 해석한 결과 1화소 이하의 정확도로 대상물의 크기를 해석할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.197-198
• /
• 2006

In the solid freeform fabrication (SFF) system using selective laser sintering (SLS), polyamide-12 powder is currently recognized as general material. In this study, some kinds of polyamide-6 powders with different shape and particlesize were fabricated to investigate the formability, the microstructure and mechanical properties. Also, to develop a more elaborate and rapid system, this study employs a new SLS device with a 3-axis dynamic focusing scanner system instead of the existing fe lens used in commercial SLS. Polyamide-6 powders having the average size of 100 m were treated thermally in order to keep the spherical symmetry in shape. These polyamide-6 powders were mixed with polyamide-12 powders having the average size of 50 m to give the bimodal distribution of size. These mixed powders showed the better fabrication in the selective laser sintering process because the smaller particles of polyamide-11 played an important role in the compact packing of powders by filling the void space between the large particles of polyamide-6. Also, Experiments have performed to evaluate the effect of a scanning path and sintering parameters by fabricating the various 3D objects.

• 방송공학회논문지
• /
• 제8권1호
• /
• pp.37-44
• /
• 2003

신호를 원하는 해상도의 신호로 다시 샘플링하기 위해 일반적으로 쓰이는 방법은 원래의 영상을 연속된 모델로 나타낸 후 이를 원하는 해상도의 신호로 다시 샘플링하는 것이다. 이산 신호를 연속 신호로 바꿀 때 이용하게 될 B-spline 함수는 다른 기저함수에 비해 진동하는 성향이 적고 적은 계수로 표현이 가능하다. 디지털 신호를 B-spline 모델로 표현하고 이 spline 신호를 새로운 해상도로 다시 샘플링하게 되면 B- spline에 기반한 비정규 리사이징이 된다. 이때 해상도는 공간에 따라 변하는 변환함수에 의해 결정하게 된다. 이 방법은 구현하기 좋지만 정보를 손실하는 약점이 있으므로 이를 극복한 최적 비정규 알고리즘을 제안한다. 최적의 비정규적인 수식 유도를 위해, 다시 샘플링된 신호는 변환 함수로 결정된 shift varying spline의 조합으로 나타내게 된다. 원래의 영상에 가장 가까운 함수를 선택함으로써 이 함수는 일반화될 수 있다.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2325-2331
• /
• 2012

UHF 대역인 860MHz~960MHz에서 동작하는 RFID 시스템용으로 도체스트립을 이용한 평판사각 스파이얼 안테나를 제안하고 분석하였다. 도체스트립의 공통선 길이, 분리간격, 선폭, 선간격, 스파이럴 회전수를 변화시켜서 안테나 입력임피던스와 RFID 테그칩 간을 정합스터브 없이 소형으로 설계하고, 최적화된 안테나를 제작하였다. 최적화된 결과로부터, VSWR<2인 범위의 주파수대역은 RFID 초고주파 대역인 100MHz를 포함한다. 안테나 이득은 910MHz 중심주파수에서 3.5DBi이고, 빔패턴은 수직과 수평방향으로 지향성 패턴을 갖는다. 따라서 제안된 안테나는 규정된 입력임피던스를 갖는 다양한 형태의 테그칩을 요구하는 실질적인 RFID 응용에 적합하다.

• 천문학회보
• /
• 제36권2호
• /
• pp.61.1-61.1
• /
• 2011

We have performed simultaneous observations at 22GHz and 43GHz on AGNs hosted by elliptical galaxies using KVN radio telescope. We have constructed the sample, based on two major surveys in radio and optical band, i.e. Faint Images of the Radio Sky at Twenty-Centimeters (FIRST) and Sloan Digital Sky Survey (SDSS) DR7, respectively. We restricted the redshift range 0.01 < z < 0.06 and the absolute magnitude Mr < -19.4 in order to satisfy volume limited sample. We also checked clear detection of four distinctive emission lines ([NII], [OIII], $H{\alpha}$, $H{\beta}$) so as to utilize on BPT diagram, distinguishing AGNs from star-forming galaxies. Elliptical galaxies have been selected by visual inspection making use of SDSS optical images. Then, we cross-matched the elliptical galaxies with FIRST detections. About 35% of the galaxies have been detected throughout KVN observations. We derive spectral index, applying the flux of different radio frequencies from FIRST (1.4GHz) and KVN (22GHz) and classify into steep, flat or inverted spectrum. We have found that most of the detected galaxies have flat spectrum while the rest of them have steep spectrum. This implies that a number of detected galaxies might have compact structure associated with the central region of the galaxies. The relation between black hole mass and radio luminosity has shown relatively tighter correlation in high frequency than in low frequency, which confirms that high frequency in radio band is appropriate to study the center of the galaxies.

• 천문학회보
• /
• 제36권2호
• /
• pp.125.2-125.2
• /
• 2011

We are developing medium resolution cross-dispersed silicon grisms in the near IR region ($1.45{\sim}5.2{\mu}m$). The grisms will be installed in MIMIR, a multifunction instrument at the Lowel Observatory, USA. The two devices are designed to cover H and K band and L and M band simultaneously. Our goal is to make grism with R=3000 at 1.2 arcsec slit. The Silicon has high refractive index (n=3.4 at $1.5{\mu}m$) which enhances the resolving power by up to 5 times when compared to conventional material such as BK-7 (n=1.5 at 1.5 ${\mu}m$). The bonded grisms will be installed in a filter wheel for the uses switch from spectroscopic mode to imaging mode easily. Our device is compact and light weighted while it provides a decent resolving power. We produce monolithic grisms using e-beam lithography at the NASA JPL and chemically etching the grooves on the silicon prisms. Moreover, the main-disperser and cross-disperser will be contacted together by direct Si-Si bonding technique and eventually turn into one piece. The bonded pair offers more stability in terms of the layout of the spectrum and removes the Fresnel loss at the intersection of two grisms. We report on the proper wafer bonding steps through this research, and inspected the bonding quality thermally, optically and mechanically.

• 천문학회보
• /
• 제39권1호
• /
• pp.50.1-50.1
• /
• 2014

The Multi-purpose InfraRed Imaging System (MIRIS) is the main payload of Science and Technology Satellite 3 (STSAT-3), which was launched onboard Dnepr rocket from Russian Yasny Launch Base in November 2013. The MIRIS is an infrared (IR) camera, and the telescope has to be cooled down to below 200K in order to reduce thermal background noise. For the effective cooling and low-power consumption, we applied passive cooling method to the thermal design of the MIRIS. We also conducted thermal analysis and tested for the passive cooling before the launch of STSAT-3. After the launch, we have received State-of-Health (SOH) data from the satellite on orbit, including temperature monitoring results. It is important that the temperature of the telescope was shown to be cooled down to below 200K. In this paper, we present both the temperature data of the MIRIS on orbit and the thermal analysis results in the laboratory. We also compare these results and discuss the verification of the passive cooling.