• Advances in concrete construction
• /
• 제1권4호
• /
• pp.319-340
• /
• 2013

This paper presents a comparative study on the double-K fracture parameters of concrete obtained using four existing analytical methods such as Gauss-Chebyshev integral method, simplified Green's function method, weight function method and simplified equivalent cohesive force method. Two specimen geometries: three point bend test and compact tension specimen for sizes 100-500 mm at initial notch length to depth ratios 0.25 and 0.4 are used for the comparative study. The required input parameters for determining the double-K fracture parameters are derived from the developed fictitious crack model. It is found that the cohesive toughness and initial cracking toughness determined using weight function method and simplified equivalent cohesive force method agree well with those obtained using Gauss-Chebyshev integral method whereas these fracture parameters determined using simplified Green's function method deviates more than by 11% and 20% respectively as compared with those obtained using Gauss-Chebyshev integral method. It is also shown that all the fracture parameters related with double-K model are size dependent.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.414-419
• /
• 2011

Missile am fighter aircraft have been challenged by low restoring nose-down pitching moment at high angle of attach. The consequence of weak nose-down pitching moment can be resulting in a deep stall condition. Especially, the pressure oscillation has a huge effect on noise generation, structure damage, aerodynamic performance and safety, because the flow has strong unsteadiness at high angle of attack. In this paper, the unsteady aerodynamics coefficients were analyzed at high angle of attack up to 60 degrees around two dimensional NACA0012 airfoil. The two dimensional unsteady compressible Navier-Stokes equation with a LES turbulent model was calculated by OHOC (Optimized High-Order Compact) scheme. The flow conditions are Mach number of 0.3 and Reynolds number of $10^5$. The lift, drag, pressure distribution, etc. are analyzed according to the angle of attack. The results at a low angle of attack are compared with other results before a stall condition. From a certain high angle of attack, the strong vortex formed by the leading edge are flowing downstream as like Karman vortex around a circular cylinder. Unsteady velocity field, periodic vortex shedding, the unsteady pressure distribution on the airfoil surface, and the acoustic fields are analyzed. The effects of these unsteady characteristics in the aerodynamic coefficients are analyzed.

• 한국전산유체공학회지
• /
• 제18권1호
• /
• pp.1-6
• /
• 2013

Missile and fighter aircraft have been challenged by low restoring nose-down pitching moment at high angle of attach. The consequence of weak nose-down pitching moment can be resulting in a deep stall condition. Especially, the pressure oscillation has a huge effect on noise generation, structure damage, aerodynamic performance and safety, because the flow has strong unsteadiness at high angle of attack. In this paper, the unsteady aerodynamics coefficients were analyzed at high angle of attack up to 50 degrees around two dimensional NACA0012 airfoil. The two dimensional unsteady compressible Navier-Stokes equation with a LES turbulent model was calculated by OHOC (Optimized High-Order Compact) scheme. The flow conditions are Mach number of 0.3 and Reynolds number of $10^5$. The lift, drag, pressure, entropy distribution, etc. are analyzed according to the angle of attack. The results of average lift coefficients are compared with other results according to the angle of attack. From a certain high angle of attack, the strong vortex formed by the leading edge are flowing downstream as like Karman vortex around a circular cylinder. The primary and secondary oscillating frequencies are analyzed by the effects of these unsteady aerodynamic characteristics.

• 한국산업정보학회논문지
• /
• 제12권4호
• /
• pp.41-54
• /
• 2007

주문 검토 및 투입(ORR; Order Review/Release) 모형의 활발한 활용을 위해서는 ORR모형의 분석과, 사용 환경에 맞는 분류가 이뤄져야 한다. 본 논문은 ORR의 역할과 관련 패러독스를 소개하고, ORR의 DSS화를 위한 분류체계를 제시한다. "COMPACT(COMplexity-imPACT) 매트릭스"라 명명된 ORR모형 분류체계는 복잡성에 따라 모형을 분류하고 각 복잡성 단계에서 모형의 유효성을 평가한 결과물이다. 이 분류체계는 사용자가 설정한 복잡성 정도에 맞춰 효과적인 모형을 제시한다는 사상을 통해 ORR모형의 DSS화와 활용에 기여할 것이다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권2호
• /
• pp.52-60
• /
• 2009

The purpose of this research is to develop high efficiency plastic plate heat exchangers which can be substituted for conventional aluminum plate heat exchangers. Four simulation models of plastic plate heat exchangers are designed and simulated: that is, flat plate type, turbulent promoter type, corrugate type and dimple type heat exchanger. The flat plate type is designed as the reference model in order to evaluate how much thermal performance increases. The turbulent promoter type is fabricated with cylindrical-type vortex generators and rib-type turbulent promoters. The corrugate type is obtained from the conventional stainless steel compact heat exchangers, which are called the herringbone-type compact heat exchangers. The dimple type has a number of dimples on its surface. In this study, the flow and heat transfer characteristics of the plastic plate heat exchanger are investigated using numerical simulation and compared with experimental results. Numerical simulation is carried out using the FLUENT code. The flows are assumed as a three-dimensional, incompressible and turbulent model. The computational analysis and experimental results both show that the friction coefficient and Nu number is highest in the corrugate type. The tendency of numerical simulation results is in good agreement with that of the experimental results.

• KIEE International Transactions on Power Engineering
• /
• 제3A권2호
• /
• pp.63-69
• /
• 2003

The necessity of compact high temperature superconducting cables is more keenly felt in densely populated metropolitan areas. Because the compact high-temperature superconducting cables can be installed in ducts and tunnels, thereby reducing construction costs and making the use of underground space more effective, the effect of introducing it to the power system will be huge. Seoul, Korea, is selected as a review model for this paper. The loads are estimated by scenario based on a survey and analysis of 345kV and 154kV power supply networks in this area. Based on this, the following elements for an urban transmission system are examined. (1) A method of constructing a model system to introduce high-temperature superconducting cables to metropolitan areas is presented. (2) A case study is conducted through the analysis of power demand scenarios, and the amount of high-temperature superconducting cable to be introduced by scenario is examined. (3) The economy involved in expanding existing cables and introducing high-temperature superconducting cables(ducts or tunnels) following load increase in urban areas is examined and compared., and standards for current cable ducts are calculated. (4) The voltage level that can be accommodated by existing ducts is examined.

• 소성∙가공
• /
• 제21권4호
• /
• pp.228-233
• /
• 2012

In this study, powder compaction of AZO (alumina doped zinc oxide) powder was performed with a MTS 810 test system using a cylindrical die having a diameter of 10mm. Pressure-density curves were measured based on the load cell and displacement of the punch. The AZO powder compacts with various densities were formed to investigate the mechanical properties such as fracture stress of the AZO powder as a function of the compact density. Two types of compression tests were conducted in order to estimate the fracture stress using different loading paths: a diameteral compression test and a uniaxial compression test. The pressure-density curves of the AZO powder were obtained and the fracture stress of the compacted powders with various densities was estimated. The results show that the compact pressure dramatically increases as the density increases. Based on the experimental results, calibration of the modified Drucker-Prager/Cap model of the AZO powder for use in FE simulations was developed.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.933-940
• /
• 2024

A macroscopic cross section generation model was developed for the conceptual horizontal, compact high temperature gas reactor (HC-HTGR). Because there are many sources of spectral effects in the design and analysis of the core, conventional LWR methods have limitations for accurate simulation of the HC-HTGR using a neutron diffusion core neutronics simulator. Several super-cell model configurations were investigated to consider the spectral effect of neighboring cells. A new history variable was introduced for the existing library format to more accurately account for the history effect from neighboring nodes and reactivity control drums. The macroscopic cross section library was validated through comparison with cross sections generated using full core Monte Carlo models and single cell cross section for both 3D core steady-state problems and 2D and 3D depletion problems. Core calculations were then performed with the AGREE HTR neutronics and thermal-fluid core simulator using super-cell cross sections. With the new history variable, the super-cell cross sections were in good agreement with the full core cross sections even for problems with significant spectrum change during fuel shuffling and depletion.

• 전자공학회논문지
• /
• 제51권8호
• /
• pp.30-37
• /
• 2014

본 논문에서는 실제 공정을 반영한 FinFET의 게이트 저항 압축모델을 개발하였다. 삼차원 소자 시뮬레이터 Sentaurus를 사용하여, Y-parameter 해석 방법을 적용하여 게이트 저항을 추출하여 제안하는 모델을 검증하였다. FinFET 게이트의 전기장이 수평 수직 방향으로 형성됨을 고려하여 모델링함으로써, FinFET 게이트 저항의 비선형성을 반영하였다. 현재 제작되고 있는 FinFET에서 게이트가 두 물질(Tungsten, TiN)로 적층된 구조일 수 있음을 고려하여, 비저항이 서로 다른 물질을 적층 시킨 구조에 대한 압축 모델을 개발하였다. 제안하는 모델을 사용하여, 게이트의 기하학적 구조 변수 변화에 따른 게이트 저항이 최소가 되는 fin의 수를 제안하였다. BSIM-CMG에 제안하는 모델을 구현한 후, ring-oscillator를 설계하고, 게이트 저항이 고려되지 않았을 때와 고려되었을 때의 각단의 신호지연을 회로 시뮬레이터를 통해 비교하였다.

• 한국전자파학회지:전자파기술
• /
• 제6권3호
• /
• pp.80-90
• /
• 1995

마이크로스트립 단일선로, 직각벤드 및 결합선로의 산란행렬을 multipart r$\xi$twork model을 이용하여 1-18GHz 범위에서 계산했다. 단일선로는 평면형 도파관 모텔을 이용하여 해석했다. 직각벤드의 경우는 두개 의 사각형 부분으로 나누어져 각 부분은 단일선로와 같은 방법으로 해석되며, 각 부분의 임피던스 행렬은segmentation 방볍을 이용하여 연결된다. 결합선로 사이의 전자계 결합의 해석에는 Green 함수를 이용하는 기 존의 방법보다 계산시간이 적게 소요되는 새로운 방법이 이용되었다 상기의 세가지 구조에 대한 수치해석 결 과는 SuperCompact의 결과와 잘 일치하며, 이는 상기의 방법이 복잡한 단일 및 결합선로 불연속구조의 해석에 유용하게 사용될 수 있음을 보여준다