• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1696-1702
• /
• 2005

Real Time Transport Protocol (RTP) is the Internet standard protocol for transport of real time data audio/video IP Telephony, Multimedia Seivece. In case of 8kbps voice codec, the size of packet per data is 20bytes and become more large to minimal 40bytes with adding each layer's header in RTP/UDP/IP. To solve this problem, various header compression skill were suggested on point-to-point networks. But it compress even IP header and cannot be suitable to apply to end-to-end network Thus, We will renew header compression protocol to apply wired router-based network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.155-162
• /
• 1999

In this paper, an R_ALOHA_CDMA protocol is proposed for voice and data integrated services in the hybrid TDMA/CDMA wireless networks. In the hybrid TDMA/CDMA systems, the backward logical channels are composed of time slots with multiple spreading codes per slot. In the proposed protocol, a voice terminal can reserve a spreading code to transmit voice packets during a talkspurt. On the other hand, whenever a data terminal generates a packet, it transmits the packet through one of the available spreading codes. Throughout the results, it is shown that the system capacity increases in proportion to the number of spreading codes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.283-293
• /
• 1998

The numbering plan, basic requirements for interworking standards, and technical standard specification for National Information Infrastructure have not been defined specifically yet. It is reviewed for the numbering plans of public/private ATM networks based on the standard specifications of W-T and ATM Forum. The specifications for numbering plan are discussed for the interworking between current various networks and National Information Infrastructure based on the related standard specification of ITU-T and ATM Forum.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1427-1433
• /
• 2003

This paper presents the routing and wavelength and timeslot assignment problems for a circuit-switched time division multiplexed (TDM) wavelength-routed networks. In this paper, we propose an efficient distributed control protocol for establishing lightpath dynamically. The protocol uses backward reservation to reduce the chance of blocking. We use aggressive reservation method with usable multiple channels and select only one in multiple channel. We show through simulation that the proposed protocol improves the success rate in TDM-based lightpath establishment and the proposed aggressive reservation method improve blocking probability with appropriate reservation channel count.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.231-236
• /
• 2012

For real-time wireless sensor network applications, it is essential to provide different levels of quality of service (QoS) such as reliability, low latency, and fault-tolerant traffic control. To meet these requirements, an (m,k)-firm based real-time routing protocol has been proposed in our prior work, including a novel local transmission status indicator called local DBP (L_DBP). In this paper, a fault recovery scheme for (m,k)-firm real-time streams is proposed to improve the performance of our prior work, by contributing a delay-aware forwarding candidates selection algorithm for providing restricted redundancy of packets on multipath with bounded delay in case of transmission failure. Each node can utilize the evaluated stream DBP (G_DBP) and L_DBP values as well as the deadline information of packets to dynamically define the forwarding candidate set. Simulation results show that for real-time service, it is possible to achieve both reliability and timeliness in the fault recovery process, which consequently avoids dynamic failure and guarantees meeting the end-to-end QoS requirement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.953-959
• /
• 2012

There are a number of idle nodes in sensor networks, these can act as detector nodes for anomaly detection in the network. For detecting node selection problem modeled as optimization equation, the conventional method using centralized genetic algorithm was evaluated. In this paper, a method to improve the convergence of the optimal value, while improving energy efficiency as a method of considering the characteristics of the network topology using parallel genetic algorithm is proposed. Through simulation, the proposed method compared with the conventional approaches to the convergence of the optimal value was improved and was found to be energy efficient.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1295-1302
• /
• 2010

This paper proposed indoor location recognition method based on RSSI(received signal strength indication) using the LVQ network. In order to verify the effectiveness of the proposed method, we performed experiments, and then compared to the conventional triangularity measurement method. In the experiments, we set up the system to the laboratory, divided the 40 section, and installed 6 nodes as a reference node. We obtained the log-normal path loss model of wireless channels, RSSI converted into the distance. The distance values used as the input of LVQ. To learn the LVQ network, we set the target values as section indices. In the experiments, we determined the optimal number of subclass, and confirmed that the success rate of training phase was 96%, test phase was 91%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.608-614
• /
• 2009

In wireless sensor networks, there are hundreds to thousands of small battery powered devices which are called sensors. As sensors have a limited energy resources, there is a need to use it effectively. A clustering based routing protocol forms clusters by distributed algorithm. Member nodes send their data to their cluster heads then cluster heads integrate data and send to sink node. In this paper we propose an energy efficient cluster-head selection algorithm. We have used some factors(a previous cluster head experience, a existence of data to transmit and an information that neighbors have data or not) to select optimum cluster-head and eventually improve network lifetime. Our simulation results show its effectiveness in balancing energy consumption and prolonging the network lifetime compared with LEACH and HEED algorithms.

• Journal of Communications and Networks
• /
• v.11 no.3
• /
• pp.248-260
• /
• 2009

To connect a mobile ad hoc network (MANET) with an IP network and to carryout communication, ad hoc network node needs to be configured with unique IP adress. Dynamic host configuration protocol (DHCP) server autoconfigure nodes in wired networks. However, this cannot be applied to ad hoc network without introducing some changes in auto configuration mechanism, due to intrinsic properties (i.e., multi-hop, dynamic, and distributed nature) of the network. In this paper, we propose a scalable autoconfiguration scheme for MANETs with hierarchical topology consisting of leader and member nodes, by considering the global Internet connectivity with minimum overhead. In our proposed scheme, a joining node selects one of the pre-configured nodes for its duplicate address detection (DAD) operation. We reduce overhead and make our scheme scalable by eliminating the broadcast of DAD messages in the network. We also propose the group leader election algorithm, which takes into account the resources, density, and position information of a node to select a new leader. Our simulation results show that our proposed scheme is effective to reduce the overhead and is scalable. Also, it is shown that the proposed scheme provides an efficient method to heal the network after partitioning and merging by enhancing the role of bordering nodes in the group.

• Journal of Information Processing Systems
• /
• v.14 no.4
• /
• pp.926-940
• /
• 2018

In clustering-based approaches, cluster heads closer to the sink are usually burdened with much more relay traffic and thus, tend to die early. To address this problem, distance-aware clustering approaches, such as energy-efficient unequal clustering (EEUC), that adjust the cluster size according to the distance between the sink and each cluster head have been proposed. However, the network lifetime of such approaches is highly dependent on the distribution of the sensor nodes, because, in randomly distributed sensor networks, the approaches do not guarantee that the cluster energy consumption will be proportional to the cluster size. To address this problem, we propose a novel approach called CACD (Clustering Algorithm Considering node Distribution), which is not only distance-aware but also node density-aware approach. In CACD, clusters are allowed to have limited member nodes, which are determined by the distance between the sink and the cluster head. Simulation results show that CACD is 20%-50% more energy-efficient than previous work under various operational conditions considering the network lifetime.