• Progress in Superconductivity and Cryogenics
• /
• v.10 no.4
• /
• pp.23-28
• /
• 2008

As a part of the plasma control system (PCS) for the first plasma campaign of KSTAR, seven sets of fast feedback control loop for the superconducting poloidal field magnet power supply (PF MPS) have been implemented. A special real-time digital communication interface has been developed for the simultaneous exchanges of the current/voltage data from the 7 sets of 12-thyristor power supplies in a 200 microsecond control cycle. Preliminary power supply tests have been performed before actual cooldown of the device. A $29mH/50m{\Omega}$ solenoid dummy has been fabricated for a series of single power supply tests. Connectivity and response speed of the plasma control system have been verified. By changing hardware cabling, this load was also used to estimate mutual inductance coupling effects of two geometrically adjacent solenoid coils on each power supply. After the cooldown was complete, each pair of the up/down symmetric PF coils has been serially connected and tested as part of the device commissioning process. Bipolar operation and longer pulse attempts have been investigated. The responses of the coils and power supplies corresponding to the plasma magnetic controls in plasma discharges are also analyzed for the future upgrades.

• Design Convergence Study
• /
• v.14 no.5
• /
• pp.103-115
• /
• 2015

This study sheds light on the entertaining aspects of Media Pole that is located in Gangnam U-Street and proposes design that considers the aspects of the form, experience, contents and communication of scribbling. Functioning as public digital media, Media Pole provides various convenient services related to the area. According to the research on user's behavior upon Media Pole, photo related services, which can be categorized as entertainment, were found to be the most frequently used services among various services. Taking user's behaviors into consideration, this study highlights the entertaining aspects of Media Pole and suggests design that applies the playfulness of scribbling. The playful characteristics of scribbling were applied to the Media Pole's user interface, interaction, application and interlocking functions. As a result, users are expected to increase as Media Pole becomes more playful than before. Since scribbling is an act of intrinsic human's desire, it will attract users to participate more voluntarily. It can be applied not only to Media Pole, but to any public digital media devices.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.64.3-65
• /
• 2021

인공지능 기계학습에 의한 한문고전 자동번역기는 승정원일기 뿐만 아니라, 한국 고문헌 중 천문 기록에 특화되어 한자로 된 천문 고전을 한글로 번역해 서비스하고 있다. 한국천문연구원은 한국지능정보사회진흥원이 주관하는 2019년도 Information and Communication Technology 기반 공공서비스 촉진사업에 한국고전번역원과 공동 참여하여 이 자동 번역기 개발을 완료한 것이다. 이 번역기의 개발 목적은 초벌 번역 수준일지라도 문장 형태의 한문을 한글로 자동 번역하는 것이며, 이 연구는 현재 번역기 운용 현황을 서비스 별로 분석하고자 한다. 자동 번역관련 서비스는 크게 3가지이다. 첫째, 누구나 웹 접속을 통해 사용 가능한 한문고전 자동번역 대국민 서비스이다. 1년간 자체 시험을 거쳐 2021년 1월 12일 시험판을 오픈하여 운용 중에 있다. 둘째, 기관별로 구축된 코퍼스와 도메인 특화된 번역 모델 등을 관리할 수 있는 한문고전 자동번역 확산 플랫폼 서비스이다. 대국민 서비스와 함께 클라우드 기반으로 서비스되며, 한국고전번역원이 관리를 담당한다. 셋째, 자동번역 Applied Programmable Interface를 활용한 한국천문연구원 내 자체 활용이 가능한 천문고전 자동번역 서비스이다. 서비스 현황 분석은 기관별 관리 서비스에 해당되는 한문고전 자동번역 확산 플랫폼에서 집계하여 제공하는 대시보드의 통계 기능을 활용한다. 각 서비스별 문장과 파일 번역 이용 건수, 번역 속도, 평균 자수 뿐만 아니라, 번역 모델 프로필에 따른 이용률 분석이 가능하다. 이에 따른 주요 분석 중 하나인 올해 전체 번역 이용 건수는 한 해 각 기관의 평균 방문자수 대비 87% 성과 목표에 해당되는 약 38만 건에 근접할 것으로 예측된다. 이 자동 번역기는 원문 해독 시간을 단축시키는 효과와 함께 미번역 천문 고문헌의 활용성을 높여 다양한 연구에 기여할 것이다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.5
• /
• pp.157-164
• /
• 2023

Specifying the semantic structure for functional interfaces and lambda expressions, which are the latest features of Java, can be referenced when designing similar functions in the future, and is also required in the process of standardizing or implementing an optimized translator. In this study, action equation 3.0 is newly proposed to express the static and dynamic semantic structure of functional interfaces and lambda expressions by modifying and upgrading the existing expressions to express the semantic structures of java functional interfaces and lambda expressions. Measure the execution time of java programs by implementing the semantic structure specified in action equation 3.0 in java, and prove that action equation 3.0 is a real semantic structure that can be implemented through simulation. The superiority of this action equation 3.0 is to be confirmed by comparing the action equation 3.0 specified in the four areas of readability, modularity, extensibility and flexibility with the existing representative semantic expression methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.2
• /
• pp.397-419
• /
• 2024

Online learning has become a widespread practice for students and teachers in acquiring and delivering knowledge. Education platforms have become prominent in the 21st century with the evolution of technology and the accessibility to online learning. As a result, various learning management systems (LMSs) have been introduced to facilitate online interaction between users. For instance, communication between students and teachers at school. However, there is a need to emphasise user engagement in LMS to enhance the online learning experience amongst students since the design of LMS affects user engagement. This study utilised a systematic literature review (SLR) that examined 74 articles published between 2014 and 2023, focusing on cross-cultural design (CCD), user-centred design (UCD), and usability in LMS design. This study aimed to review CCD and its association with UCD, user interfaces (UI), and user experience (UX) in the context of LMS. CCD has been introduced as an approach to design that embraces different cultures, languages, and social contexts, while UCD plays a significant role in defining user engagement for LMS. All elements in CCD and UCD help create a better user experience for LMS. Besides, this study reviewed the usability of selected LMS to give insights to developers in creating a positive user engagement. An insight into cultural factors that influence the usability of LMS has revealed their value for LMS design, such as the UI/UX elements. Initially, this study may guide future researchers in improving education quality by emphasising CCD and LMS usability, which can enhance user engagement.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.217-225
• /
• 2024

Even after the introduction of Global Maritime Distress and Safety System (GMDSS), many maritime accidents occur. A method of transmitting a rescue signal when a person falls into the water from a ship is currently being researched and developed in various ways, but no products have been developed that use frequencies allocated for maritime mobile service. Accordingly, in this study, we designed and produced a man-over-board (MOB) device by applying Group B AMRD technologies, which were adopted through the latest revision of the International Telecommunication Union (ITU). In addition, a receiver and user interface were built to verify the performance of the transmitter, and we confirmed that it can be used in conjunction with existing electronic charts. This MOB device satisfies the general and technical requirements of Group B AMRD using AIS technology and uses integrated components for miniaturization for easy portability in a maritime environment. We expect that it will achieve excellent AIS communication and be essential in rapid response and safety in emergency scenarios.

• Journal of Korean Elementary Science Education
• /
• v.43 no.3
• /
• pp.385-401
• /
• 2024

This study presents a step-by-step analysis of the experiences and discussions of five elementary school teachers while developing the Augmented Reality (AR) science educational materials, using the Unity Physics Engine. In the preparation phase to develop the AR materials, the teachers explored the features of the AR technology and decided to create AR materials for experiments related to magnetic fields in the magnetism unit, based on discussions about the unit selection. In addition, they complained about difficulties arising out of the lack of background knowledge about the C# programming language in the preparation phase. During the material development stage, there were difficulties in operating the unfamiliar interface and other functions of the software. However, this was overcome through knowledge sharing and collaborative communication among the teachers. The final materials developed were marker-type AR materials to perform experimental activities by changing the position of the magnet and the compass markers. Based on the developed materials, the teachers discussed their smooth utilization during the classroom activities.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.4
• /
• pp.421-429
• /
• 2000

In present, ATM integrated switching system has been developed to a mixed modules that complexed switching system including maintenance, operation based on B-ISDN/LAN service and plug-in module, , which runs on workstation computer system. Meanwhile, workstation has HMI operation system feature including file system management, time management, graphic processing, TMN agent function. The workstation has communicated with between ATM switching module and clients. This computer system architecture has much burden messages communication among processes or processor. These messages communication consume system resources which are socket, message queue, IO device files, regular files, and so on. Therefore, in this paper we proposed new performance modeling with this system architecture. We will analyze the system bottleneck and improve system performance. In addition, in the future, the system has many additional features should be migrated to workstation system, we need previously to evaluate system bottleneck and redesign it. In performance model, we use queueing network model and the simulation package is used PDQ and C-program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8933-8939
• /
• 2015

In this paper, we designed a multi humanoid robot control method for performing an exhibition that will maximize the efficiency and user convenience and implementation. In recent years, an increasing number of case and to take advantage of the robots in the field performances and exhibitions, plays, musicals, orchestra performances are also various genres. In concert with the existing small humanoid exhibition to source from outside by using a computer and MP3 player and play, while pressing the start button of communication equipment for the show to start the robot began performing with the zoom. Thus, due to the dual source and robot operation and synchronization does not work well is the synchronization of the start of the concert sound starting point of the robot and robot motion and sound are reproduced separately were frequently occurs when you need to restart the show. In addition, when the center of gravity or lose the robots who were present during the performance problems such as performance or intervene to restart the show. In order to overcome this, in this paper, Multi-small humanoid robot was designed to control the efficiency and the user of the GUI-based human interface S/W to maximize convenience, Zigbee communication to transmit a plurality of data in al small humanoid It was used. In addition, targeting a number of the small humanoid robot demonstrated the effectiveness and validity of the user's convenience by gender actual implementation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.180-186
• /
• 2020

ICT convergence using smart livestock is that in the first-generation dairy smart farm model, each device made by several manufacturers uses its own communication method, limiting the mutual operation of each device. This study uses a model based on open control technology to secure interoperability of existing ICT devices and to manage data efficiently. The open integrated control derived from this process is the software interface structure of Open API. It is an observer that serves as real-time data collection according to the communication method of ICT devices and sensors located at each end. It consists of a broker that connects and transmits to the upper integrated management server. As a result of the performance analysis through verification of two first-generation dairy smart farm model sites, the average daily milk production increased compared to the previous year (farm A 5.13%, farm B 1.33%, p<0.05). Cow days open (DO) was reduced by 17.5% on farm A and 13.3% for farm B(p<0.05). Cows require an adaptation period after the introduction of the ICT device, but if continuous effects are observed, the effect of production can be expected to increase gradually.