• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.8
• /
• pp.743-750
• /
• 2016

The conventional track to train communication is commonly using radio based equipment such as transponder or balise to transmit the data. However, there are some drawbacks of the conventional equipment, for example multipath fading, source of bandwidth limitation, and interference from other users. Moreover, the radio based equipment is very expensive when installed in large numbers. To address these problems, we propose infrared system for trackside to train communication system. Infrared system offers a transmission of data to train and it can be processed to obtain at least a train location. Infrared communication protocol provides practical wireless data communication for direct dedication configuration. Furthermore, on the pole configuration the infrared system provides an abundant bandwidth, an economically sensible, minimalized installation of equipment on the trackside and reliability for heavy rain environment. This paper concentrates on the communication function and measurement performance evaluation. The proposed trackside to train communication system covers about 6 meters between infrared receiver and infrared transmitter, whereas the half angle of the transmitter is set to $19.65^{\circ}$ and the receiver angle is $15^{\circ}$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.122-128
• /
• 2017

In order to simplify the wiring of construction heavy equipment, researches on PLC(Power Line Communication)-CAN(Controller Area Network) communication module are actively proceeding. Even if a PLC-CAN communication module is developed, a simulator capable of judging whether the PLC-CAN communication module is operating normally is needed. In this paper, we designed and developed a simulator that can measure the status of PLC-CAN communication module. We analyzed the characteristics of the power line communication frequency band by analyzing the characteristics of the power line and compared the noise characteristics with the passenger car in order to characterize the heavy equipment noise.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.67-72
• /
• 2013

Temperature is a critical parameter in yield improvement for wafer manufacturing. In chemical vapor deposition (CVD) equipment, crack defect in ceramic heater leads to yield reduction, however, there is no suitable ceramic heater fault detection system for conventional CVD equipment. This paper proposes a short-time zero-crossing rate based fault detection method for the ceramic heater in CVD equipment. The proposed method measures the output signal ($V_{pp}$) of RF filter and extracts the zero-crossing rate (ZCR) as feature vector. The extracted feature vectors have a discriminant power and Gaussian mixture model (GMM) based fault detection method can detect fault in ceramic heater. Experimental results, carried out by measured signals provided by a CVD equipment manufacturer, indicate that the proposed method detects effectively faults in various process conditions.

• Journal of Drive and Control
• /
• v.15 no.4
• /
• pp.81-90
• /
• 2018

Indoor construction site such as building demolition sites, tunnel, vinyl house, and cattle shed are subject to various risk factors such as falling stones, soot and bad odors. However, most of the mini excavators have no cabin that can protect the driver from such risk factors. Therefore, researches on remote control technology of construction equipment are actively conducted as a method for protecting the driver from the risk factors occurring in the working environment. For effective remote control, it is necessary to be able to control the travelling and work using a portable small transmitter. However, due to the limitation of the size of the transmitter, complex operation control is required to control two or more actuators with a single joystick. Also, it is essential to check how remote control characteristics change in various environments such as distance, signal strength, obstacle. Therefore, in this study, an algorithm that can control two actuators simultaneously with a single joystick signal was developed, and a communication method suitable for indoor and outdoor mini construction equipment by analyzing experimentally how the remote control characteristics vary according to various work environments and telecommunication methods proposed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.373-374
• /
• 2022

The sea-communication fishing equipment installed on small vessels such as offshore fishing vessels is highly dependent on foreign products due to its high dependence on foreign products. From the perspective of domestication, the development of localization at the overseas level is underway, and we intend to demonstrate it by creating a dedicated testbed in order to secure track records. In this paper, we wanted to derive the testbed shape and design method through basic research for the design of the testbed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.173-177
• /
• 2000

In this paper new automatic gate system(AC5) which is used fo. non-stop gate entrance of container trucks is developed. The gate entrance imformations are transmitted and received by 5.8GHa dedicated short range communication(DSRC) between roadside equipment(RSE) and on-board equipment(OBE). The conventional systems, such as barcode system and camera identifiation system, are needed for container vehicles to stop at the gate. Here DSRC system and AGS are considered and the AGS and convensional systems are compared.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.374-379
• /
• 2001

The satellite electronic equipment is exposed to high level random vibration environment during the launch of spacecraft. The random vibration can cause damage of electronic equipment. Thus very careful consideration on the launch environment, especially for high level random vibration, is required in the design stage of transponder equipments of communication satellite. For the structural integrity of the communication satellite transponder equipment under qualification level random vibration, Finite Element analysis was carried out using the commercial code, MSC/Nastran and ANSYS and stress levels are presented. In order to validate the femodel, modal test was also performed and compared with numerical results.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.41-44
• /
• 2000

In this paper, the dedicated short range communication(DSRC) system which used as the automatic gate system(AGS) Donga Univ. RRC developed is applied to yard automation. We proposed the communication algorithm of between roadside equipment(RSE) and on-board equipment(OBE). We analyzed transmitted and received information, classification and feature of between OBE and RSE for automation of the container yard and unloading system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.1
• /
• pp.42-48
• /
• 2019

Since the underwater telephone was sold in a short time, there are few repair equipments. And equipment is difficult to locate fault. Equipment with transducers must be inspected underwater, and a relative naval vessels is required to perform an operational check. So we developed a tester device to test the transmission card through the spectrum and transmission power, and to develop a device that can conduct operational tests on land. Therefore, the development of the tester reduces the incidence of naval vessels and contributes to the development of domestic underwater communication test equipment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2313-2318
• /
• 2009

In this paper, when the power equipment, which is based on RFID, is managed, it is reviewed the performance of RFID frequency recognition and its scheme is required to manage status information efficiently. The proposed paper is studied for optimization of recognition performance, when tags are attached the power equipment & major components, to diagnosis failure status of power equipment in monitoring service. The results of paper is valuable applying environment of power equipment.